Thanks, I've configured separate Aggregate Devices though Audio MIDI Setup
and it seems to have done the job and remembered after reboots the correct
devices.
Steve
G0UQT
On Wed, 12 Feb 2020 at 23:12, ALLAN LOVETT via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> The thing that drives
You might look into UDEV rules... and setting up aliases for each device
based on its identifiers. I've got a similar thing going on with a
RigBlaster and another USB audio device... The Serial control lines were
getting mixed up until I set the RB to always come up as /dev/ttyUSB-RB and
the serial
The thing that drives me crazy it that it seems that everytime I turn
everything on, the USB inputs and outputs have changed names. At least for the
Audio, you can take care of this by opening Audio MIDI Setup and reagent
aggregate Devices. I made an IC7300 out and in and a IC9700 Out and In. Y
Hi,
I have both the Icom IC-7300 and IC-9700 working with MacLoggerDX on MacOS
10.14, providing both rigs are not connected via USB at the same time.
When both are connected at the same time then WSJT-X always tries to
send/receive via the 7300 (even if the 7300 is switched off and 9700 is
on).
