Damn, there is more to know than my old brain can handle. I will keep your
email and try this in the near future. I did quickly try to use “RIG” but that
didn’t work. Likely I didn’t set everything correctly.
Thanks so much for your suggestions.
73,
Marty, W6NEV
mcway...@comcast.net
Hi Marty,
some of the older Yaesu rigs do not accept CAT QSY commands while
transmitting and the SignaLink USB does not help out with that as it
does it's own thing with the PTT.
If you have the WSJT-X "Settings->General->Allow Tx frequency changes
while transmitting" box checked, try
Fake it "should" work on all rigs. There can be some timing issues and RS-232
is not an error free protocol either.But errors like that are usually due to
the baud rate being too fast and/or noise on the RS-232 cable.
What baud rate are you using? Rig split is the preferred setting and should
Thanks for the response. I’ve received several other emails suggesting using
“none” for the 1000MP. That seems to work well for me.
Marty Wayne
mcway...@comcast.net
408-234-8023
> On Aug 27, 2018, at 1:53 PM, Black Michael via wsjt-devel
> wrote:
>
> You've got "Fake It" checked so the
I guess returning to the correct freq is the issue. I just got another
response with the same suggestion. This person says he has an FT-1000MP and
sees the same problem when “wing it” is selected. There must be something
different about the MP that other radios don’t exhibit.
Thanks for the
