[wsjt-devel] CQ Rx bug
I build WSJTX 1.6.1 r5892 from sourceforge this morning. Using a Yaesu FT-2000 and DXLabs Commander for CAT. I have 50.280 set in the Working Frequencies list for JTMSK mode. When I put a checkmark in the box to activiate the CQ RX 285, the radio goes to 50.285 as it should. But when I Enable Tx to CQ, the radio stays on 50.285 instead of switching back to 50.280 on transmit. It makes no difference if I have split operation set to none or Rig in the settings and the Rx frequency offset with "CQ nnn..." is check marked. 73 Jay Jay Hainline KA9CFD Colchester, IL EN40om -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] CQ Rx bug
On 14/09/2015 14:07, Jay Hainline wrote: Hi Jay, > I build WSJTX 1.6.1 r5892 from sourceforge this morning. Using a Yaesu > FT-2000 and DXLabs Commander for CAT. I have 50.280 set in the Working > Frequencies list for JTMSK mode. When I put a checkmark in the box to > activiate the CQ RX 285, the radio goes to 50.285 as it should. But when I > Enable Tx to CQ, the radio stays on 50.285 instead of switching back to > 50.280 on transmit. It makes no difference if I have split operation set to > none or Rig in the settings and the Rx frequency offset with "CQ nnn..." is > check marked. Did Commander and your rig go into split mode? As a sanity check can you try the same test with Commander not running and WSJT-X configured to talk directly to your rig please? > > 73 Jay > > Jay Hainline KA9CFD > Colchester, IL EN40om 73 Bill G4WJS. -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] CQ Rx bug
On 14/09/2015 14:50, Jay Hainline wrote: Hi Jay, > Hello Bill. I have WSJTX CAT configured for the Yaesu FT-2000 now and with > split operation set to Rig, It is functioning correctly. So it must be an > issue with DXlabs Commander. OK. You didn't confirm if Commander went to split mode, that would help to isolate the issue. Also, have you tried using Commander with "Fake It" split operation, that doesn't use split mode but makes VFO changes "just in time" to do the same thing. > > 73 Jay > > Jay Hainline KA9CFD > Colchester, IL EN40om 73 Bill G4WJS. > > -Original Message- > From: Bill Somerville > Sent: Monday, September 14, 2015 13:37 > To: wsjt-devel@lists.sourceforge.net > Subject: Re: [wsjt-devel] CQ Rx bug > > On 14/09/2015 14:07, Jay Hainline wrote: > Hi Jay, >> I build WSJTX 1.6.1 r5892 from sourceforge this morning. Using a Yaesu >> FT-2000 and DXLabs Commander for CAT. I have 50.280 set in the Working >> Frequencies list for JTMSK mode. When I put a checkmark in the box to >> activiate the CQ RX 285, the radio goes to 50.285 as it should. But when I >> Enable Tx to CQ, the radio stays on 50.285 instead of switching back to >> 50.280 on transmit. It makes no difference if I have split operation set >> to >> none or Rig in the settings and the Rx frequency offset with "CQ nnn..." >> is >> check marked. > Did Commander and your rig go into split mode? > > As a sanity check can you try the same test with Commander not running > and WSJT-X configured to talk directly to your rig please? >> 73 Jay >> >> Jay Hainline KA9CFD >> Colchester, IL EN40om > 73 > Bill > G4WJS. -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] CQ Rx bug
Yes Joe. It appears to be a problem between Dxlabs Commander and WSJT-X. I sent a debugging file created by Commander to Bill. Hope that helps in tracking down the issue. I know a few people on Ping Jockey this morning were having a similar problem. But I don’t know if they also use Commander or not. 73 Jay Jay Hainline KA9CFD Colchester, IL EN40om -Original Message- From: Joe Taylor Sent: Monday, September 14, 2015 15:26 To: WSJT software development Subject: Re: [wsjt-devel] CQ Rx bug Hi Jay, I checked operation of the "CQ nnn ..." transmission on the FT-2000 at W2PU this morning, and it seems to be OK. I was using "Rig" split mode, and no Commander in the loop. I see that you have now got this same result. -- Joe, K1JT On 9/14/2015 9:07 AM, Jay Hainline wrote: > I build WSJTX 1.6.1 r5892 from sourceforge this morning. Using a Yaesu > FT-2000 and DXLabs Commander for CAT. I have 50.280 set in the Working > Frequencies list for JTMSK mode. When I put a checkmark in the box to > activiate the CQ RX 285, the radio goes to 50.285 as it should. But when I > Enable Tx to CQ, the radio stays on 50.285 instead of switching back to > 50.280 on transmit. It makes no difference if I have split operation set > to > none or Rig in the settings and the Rx frequency offset with "CQ nnn..." > is > check marked. > > 73 Jay > > Jay Hainline KA9CFD > Colchester, IL EN40om > > > > -- > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
