Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Claude Frantz]

On 3/6/21 5:28 PM, Charles Suckling wrote:

Hi Charles and all,


I just built it here. What differences do you see?


I started my investigation at the time as I have got an error message 
while trying to build the user manual using asciidoctor-pdf. The message 
says that the image file


./doc/user_guide/en/images/Q65_6m_ionoscatter.png is missing. I have 
tried to get this file using git in order be in synchronisation with the 
repo. This file was not on the repo.


Then I have examinated the user guide on…

https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.4.0-rc2.html. 
I was looking to the place where this missing file should be inserted 
on. On the document from the www.physics.princeton.edu site, there is an 
image at this place, but it's related to 2m, not to 6m. Therefore, it's 
not the same image. Further, I have found, that the text just above the 
image is different. My conclusion was that the two documents are 
different. Joe has just confirmed my observation in his previous message.


Best wishes,
Claude (DJ0OT)



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Claude Frantz]

On 3/6/21 5:25 PM, Joe Taylor wrote:

Hi Joe and all,

For any reason unknown to me, the doc generated from 
./doc/user_guide/en/ is different from the doc found here:


https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.4.0-rc2.html 


There is not only this image missing, there are other differences too.

Anybody knows why ?


At any time the version of WSJT-X User Guide posted on the WSJT web site 
may be more recent than one built from the published source code tarball.


This is especially true during a Release Candidate phase, when new text 
and corrections are being added.


Many thanks for this information, which was not known to me previously.

Best wishes,
Claude (DJ0OT)


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Feature Requests

[Dave L via wsjt-devel]

There are a couple of features I would find useful and I'm wondering if these 
are possible for future inclusion...
In the "Colors" tab, would it be possible to add a list of specific call signs 
that are watched for and highlighted when they are decoded?It would also be 
nice to have a text file of call signs that we can add to ignore list so WSJT-X 
won't display their decodes.___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Richard Shaw]

WSJTX 2.4.0 RC2 has been built for Fedora and EPEL has been built for those
wanting to test.

https://copr.fedorainfracloud.org/coprs/hobbes1069/WSJT/

Thanks,
Richard
KF5OIM
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[David Kaplan via wsjt-devel]

The ~ is actually a shortcut for /Macintosh HD/Users/Username were Username is 
the name of your home folder.

You can try /Macintosh HD/Users/Username/Library/Preferences directly.

Does that help?

David, WA1OUI


On Mar 6, 2021, at 11:21 AM, John Stengrevics  wrote:

Hi Dave,

I followed your instructions, but ~/Library/Preferences/ is not there.  Neither 
is there a folder for WSJT.  And if I search “Library” for 
~/Library/Preferences/, nothing comes up.

John
WA1EAZ



> On Mar 6, 2021, at 11:10 AM, David Schmocker  > wrote:
> 
> Hi John:
> In order to show that folder,  
>  
> Open Mac finder
> Hold down the “Alt (Option)” key (lower left of keyboard).
> Navigate with mouse to the Go pull-down menu
> Select (left-click) library from that list.. 
> Think now you can see those previously hidden files.   ?  
>  
> 73
> Dave KJ9I
>  
> From: John Stengrevics  >
> Reply-To: WSJT software development  >
> Date: Saturday, March 6, 2021 at 10:05 AM
> To: Steven Franke mailto:s.j.fra...@icloud.com>>
> Cc: WSJT software development  >
> Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync
>  
> Steve,
>  
> I understand, but I can’t find the ~/Library/Preferences/ folder.  If I 
> search my Mac for it, nothing comes up but “WSJT User Guide.”  I don’t see it 
> anywhere.
>  
> Sorry to be so clueless here.
>  
> John
> WA1EAZ
> 
> 
>> On Mar 6, 2021, at 10:54 AM, Steven Franke > > wrote:
>>  
>> John, 
>>  
>> The file that Bill sent to you should be placed in the ~/Library/Preferences 
>> folder. This is the folder that your existing WSJT-X.ini file is located in. 
>> You should be able to open the ~/Library/Preferences folder and simply grab 
>> the attachment that Bill sent and drag it into that folder. When you are 
>> done you should see both WSJT-X.ini and wsjtx_log_config.ini next to (or 
>> near) each other in the list of files in that folder.
>>  
>> ut User Guide.73 Steve k9an
>> 
>> 
>>> On Mar 6, 2021, at 9:43 AM, John Stengrevics >> > wrote:
>>>  
>>> Hi Steve,
>>>  
>>> Thanks for that.  
>>>  
>>> I have followed your suggestions.  However, I don’t see 
>>> ~/Library/Preferences/ under WSJT.  (Bill had asked me to move a file that 
>>> he sent (wsjt_log_config.ini) there for debugging purposes.)  Maybe move it 
>>> to WSJT INI?
>>>  
>>> 73,
>>>  
>>> John
>>> WA1EAZ
>>> 
>>> 
 On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel 
 >>> > wrote:
  
 John, 
 You can make the ~/Library folder visible in Finder with the following 
 steps:
  
 1. Open a Finder window.
 2. Select your home directory in the left panel of the Finder window.
 3. Select Show View Options under the “View” menu.
 4. Check the “Show Library Folder” box.
  
 Thereafter, your Library folder will always be visible.
  
 73 Steve k9an
 
 
> On Mar 6, 2021, at 8:36 AM, John Stengrevics  > wrote:
>  
> Hi Bill,
>  
> I can’t find the ~/Library/Preferences/ directory in which to put the 
> file.  Can you provide a bit more detail on how I can locate it?  Sorry.
>  
> John
> WA1EAZ
> 
> 
>> On Mar 6, 2021, at 9:20 AM, Bill Somerville > > wrote:
>>  
>> Hi John,
>>  
>> so I can see what is happening put the attached file into the WSJT-X 
>> configuration files directory (~/Library/Preferences/ on macOS), restart 
>> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X 
>> (do not turn off the rig until WSJT-X has exited). There will be a new 
>> file on your Desktop called WSJT-X_RigControl.log, send me that file for 
>> analysis please (g4wjs  classdesign  com)?
>>  
>> Once you have sent me the log file delete the wsjtx_log_config.ini and 
>> WSJT-X_RigControl.log files to resume normal operation.
>>  
>> 73
>> Bill
>> G4WJS.
>>  
>> On 06/03/2021 14:13, John Stengrevics wrote:
>>> Bill, 
>>>  
>>> I have CAT selected and it does connect when I click on Test.
>>>  
>>> John (G4KLA) had asked what driver I was using.  I replied that the 
>>> driver had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
>>>  
>>> John
>>> WA1EAZ
>>> 
>>> 
 On Mar 6, 2021, at 9:07 AM, Bill Somerville >>> > wrote:
  
 Hi John,
  
 which option do you have checked for "Preferences->Radio->PTT Method"?
  
 73
 Bill
 G4WJS.
  
 On 06/03/2021 14:03, John Stengrevics wrote:
> Hi Bill, 
>  
> I just tried to use Q65 with 

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Charles Suckling]

Hi Claude

I just built it here. What differences do you see?

73

Charlie G3WDG/DL3WDG


On Sat, 6 Mar 2021 at 17:09, Claude Frantz 
wrote:

> On 3/6/21 9:06 AM, Claude Frantz wrote:
>
> Hi,
>
> > I cannot find the file
> > ./doc/user_guide/en/images/Q65_6m_ionoscatter.png
> > in the source code from the repo. It's needed to build the doc.
>
> For any reason unknown to me, the doc generated from
> ./doc/user_guide/en/ is different from the doc found here:
>
>
> https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.4.0-rc2.html
>
> There is not only this image missing, there are other differences too.
>
> Anybody knows why ?
>
> Best wishes,
> Claude (DJ0OT)
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[David Schmocker]

John:
Please send your telephone number to me at kj9idave. (at).  Charter. [dot]. 
Net.  . Let’s try a phone call. 

Very 73,
Dave

 

From: John Stengrevics 
Reply-To: WSJT software development 
Date: Saturday, March 6, 2021 at 10:24 AM
To: WSJT software development 
Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

 

Hi Dave,

 

I followed your instructions, but ~/Library/Preferences/ is not there.  Neither 
is there a folder for WSJT.  And if I search “Library” for 
~/Library/Preferences/, nothing comes up.

 

John

WA1EAZ

 

 



On Mar 6, 2021, at 11:10 AM, David Schmocker  wrote:

 

Hi John:
In order to show that folder,  

 

Open Mac finder

Hold down the “Alt (Option)” key (lower left of keyboard).

Navigate with mouse to the Go pull-down menu

Select (left-click) library from that list.. 

Think now you can see those previously hidden files.   ?  

 

73
Dave KJ9I

 

From: John Stengrevics 
Reply-To: WSJT software development 
Date: Saturday, March 6, 2021 at 10:05 AM
To: Steven Franke 
Cc: WSJT software development 
Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

 

Steve,

 

I understand, but I can’t find the ~/Library/Preferences/ folder.  If I search 
my Mac for it, nothing comes up but “WSJT User Guide.”  I don’t see it anywhere.

 

Sorry to be so clueless here.

 

John

WA1EAZ




On Mar 6, 2021, at 10:54 AM, Steven Franke  wrote:

 

John, 

 

The file that Bill sent to you should be placed in the ~/Library/Preferences 
folder. This is the folder that your existing WSJT-X.ini file is located in. 
You should be able to open the ~/Library/Preferences folder and simply grab the 
attachment that Bill sent and drag it into that folder. When you are done you 
should see both WSJT-X.ini and wsjtx_log_config.ini next to (or near) each 
other in the list of files in that folder.

 

ut User Guide.73 Steve k9an




On Mar 6, 2021, at 9:43 AM, John Stengrevics  wrote:

 

Hi Steve,

 

Thanks for that.  

 

I have followed your suggestions.  However, I don’t see ~/Library/Preferences/ 
under WSJT.  (Bill had asked me to move a file that he sent 
(wsjt_log_config.ini) there for debugging purposes.)  Maybe move it to WSJT INI?

 

73,

 

John

WA1EAZ




On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel 
 wrote:

 

John, 

You can make the ~/Library folder visible in Finder with the following steps:

 

1. Open a Finder window.

2. Select your home directory in the left panel of the Finder window.

3. Select Show View Options under the “View” menu.

4. Check the “Show Library Folder” box.

 

Thereafter, your Library folder will always be visible.

 

73 Steve k9an




On Mar 6, 2021, at 8:36 AM, John Stengrevics  wrote:

 

Hi Bill,

 

I can’t find the ~/Library/Preferences/ directory in which to put the file.  
Can you provide a bit more detail on how I can locate it?  Sorry.

 

John

WA1EAZ




On Mar 6, 2021, at 9:20 AM, Bill Somerville  wrote:

 

Hi John,

 

so I can see what is happening put the attached file into the WSJT-X 
configuration files directory (~/Library/Preferences/ on macOS), restart 
WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do not 
turn off the rig until WSJT-X has exited). There will be a new file on your 
Desktop called WSJT-X_RigControl.log, send me that file for analysis please 
(g4wjs  classdesign  com)?

 

Once you have sent me the log file delete the wsjtx_log_config.ini and 
WSJT-X_RigControl.log files to resume normal operation.

 

73
Bill
G4WJS.

 

On 06/03/2021 14:13, John Stengrevics wrote:

Bill, 

 

I have CAT selected and it does connect when I click on Test.

 

John (G4KLA) had asked what driver I was using.  I replied that the driver had 
not changed.  It has always been  /dev/cu.usbserial-A503XYAO.

 

John

WA1EAZ




On Mar 6, 2021, at 9:07 AM, Bill Somerville  wrote:

 

Hi John,

 

which option do you have checked for "Preferences->Radio->PTT Method"?

 

73
Bill
G4WJS.

 

On 06/03/2021 14:03, John Stengrevics wrote:

Hi Bill, 

 

I just tried to use Q65 with “Cumulative" selected as you suggested.  However, 
the problem is still there as described below.  I have to shut down my 
transceiver (Elecraft K3S) to get it to stop transmitting.

 

Thanks,

 

John

WA1EAZ




On Mar 6, 2021, at 8:44 AM, Bill Somerville  wrote:

 

Hi John,

 

I am not sure as I have not investigated this issue yet. It is easy enough to 
check, select "Cumulative" for the 2D spectrum display, restart WSJT-X, and see 
if the iusse goes away.

 

73
Bill
G4WJS.

 

On 06/03/2021 13:25, John Stengrevics wrote:

Hi Bill, 

 

Will this fix solve the problem I reported yesterday with OS Big Sur?  I’ll 
repost below in case you didn’t see it.

 

Thanks,

 

John

WA1EAZ

 

Repost - some additions in red:  

 

John & Joe,

I had been using the previous version successfully on a MacBook Pro (Intel not 
M1) OS Big Sur 11.2.2.

Today, I downloaded Mac version 2.4.0-rc2.  

When 

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Joe Taylor]

Hi Claude,

On 3/6/2021 11:05 AM, Claude Frantz wrote:

For any reason unknown to me, the doc generated from 
./doc/user_guide/en/ is different from the doc found here:


https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.4.0-rc2.html 


There is not only this image missing, there are other differences too.

Anybody knows why ?


At any time the version of WSJT-X User Guide posted on the WSJT web site 
may be more recent than one built from the published source code tarball.


This is especially true during a Release Candidate phase, when new text 
and corrections are being added.


-- Joe, K1JT


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] "PTT hangs" on Mac OS 10.14.6

[David Schmocker]

Everyone
I just tested mode JT65 and the “PTT hang” issue (new to 2.4.0rc2) affects JT65 
also.  


My test data shows this issue is not Q65-specific. 

 

Very 73, if there’s testing helpful to isolate root cause, I volunteer. 

 

Dave KJ9I

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Hi Dave,

I followed your instructions, but ~/Library/Preferences/ is not there.  Neither 
is there a folder for WSJT.  And if I search “Library” for 
~/Library/Preferences/, nothing comes up.

John
WA1EAZ



> On Mar 6, 2021, at 11:10 AM, David Schmocker  wrote:
> 
> Hi John:
> In order to show that folder,  
>  
> Open Mac finder
> Hold down the “Alt (Option)” key (lower left of keyboard).
> Navigate with mouse to the Go pull-down menu
> Select (left-click) library from that list.. 
> Think now you can see those previously hidden files.   ?  
>  
> 73
> Dave KJ9I
>  
> From: John Stengrevics 
> Reply-To: WSJT software development 
> Date: Saturday, March 6, 2021 at 10:05 AM
> To: Steven Franke 
> Cc: WSJT software development 
> Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync
>  
> Steve,
>  
> I understand, but I can’t find the ~/Library/Preferences/ folder.  If I 
> search my Mac for it, nothing comes up but “WSJT User Guide.”  I don’t see it 
> anywhere.
>  
> Sorry to be so clueless here.
>  
> John
> WA1EAZ
> 
> 
>> On Mar 6, 2021, at 10:54 AM, Steven Franke > > wrote:
>>  
>> John, 
>>  
>> The file that Bill sent to you should be placed in the ~/Library/Preferences 
>> folder. This is the folder that your existing WSJT-X.ini file is located in. 
>> You should be able to open the ~/Library/Preferences folder and simply grab 
>> the attachment that Bill sent and drag it into that folder. When you are 
>> done you should see both WSJT-X.ini and wsjtx_log_config.ini next to (or 
>> near) each other in the list of files in that folder.
>>  
>> ut User Guide.73 Steve k9an
>> 
>> 
>>> On Mar 6, 2021, at 9:43 AM, John Stengrevics >> > wrote:
>>>  
>>> Hi Steve,
>>>  
>>> Thanks for that.  
>>>  
>>> I have followed your suggestions.  However, I don’t see 
>>> ~/Library/Preferences/ under WSJT.  (Bill had asked me to move a file that 
>>> he sent (wsjt_log_config.ini) there for debugging purposes.)  Maybe move it 
>>> to WSJT INI?
>>>  
>>> 73,
>>>  
>>> John
>>> WA1EAZ
>>> 
>>> 
 On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel 
 >>> > wrote:
  
 John, 
 You can make the ~/Library folder visible in Finder with the following 
 steps:
  
 1. Open a Finder window.
 2. Select your home directory in the left panel of the Finder window.
 3. Select Show View Options under the “View” menu.
 4. Check the “Show Library Folder” box.
  
 Thereafter, your Library folder will always be visible.
  
 73 Steve k9an
 
 
> On Mar 6, 2021, at 8:36 AM, John Stengrevics  > wrote:
>  
> Hi Bill,
>  
> I can’t find the ~/Library/Preferences/ directory in which to put the 
> file.  Can you provide a bit more detail on how I can locate it?  Sorry.
>  
> John
> WA1EAZ
> 
> 
>> On Mar 6, 2021, at 9:20 AM, Bill Somerville > > wrote:
>>  
>> Hi John,
>>  
>> so I can see what is happening put the attached file into the WSJT-X 
>> configuration files directory (~/Library/Preferences/ on macOS), restart 
>> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X 
>> (do not turn off the rig until WSJT-X has exited). There will be a new 
>> file on your Desktop called WSJT-X_RigControl.log, send me that file for 
>> analysis please (g4wjs  classdesign  com)?
>>  
>> Once you have sent me the log file delete the wsjtx_log_config.ini and 
>> WSJT-X_RigControl.log files to resume normal operation.
>>  
>> 73
>> Bill
>> G4WJS.
>>  
>> On 06/03/2021 14:13, John Stengrevics wrote:
>>> Bill, 
>>>  
>>> I have CAT selected and it does connect when I click on Test.
>>>  
>>> John (G4KLA) had asked what driver I was using.  I replied that the 
>>> driver had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
>>>  
>>> John
>>> WA1EAZ
>>> 
>>> 
 On Mar 6, 2021, at 9:07 AM, Bill Somerville >>> > wrote:
  
 Hi John,
  
 which option do you have checked for "Preferences->Radio->PTT Method"?
  
 73
 Bill
 G4WJS.
  
 On 06/03/2021 14:03, John Stengrevics wrote:
> Hi Bill, 
>  
> I just tried to use Q65 with “Cumulative" selected as you suggested.  
> However, the problem is still there as described below.  I have to 
> shut down my transceiver (Elecraft K3S) to get it to stop 
> transmitting.
>  
> Thanks,
>  
> John
> WA1EAZ
> 
> 
>> On Mar 6, 2021, at 8:44 AM, Bill Somerville > > wrote:
>>  
>> Hi John,

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[David Schmocker]

Hi John:
In order to show that folder,  

 

Open Mac finder

Hold down the “Alt (Option)” key (lower left of keyboard).

Navigate with mouse to the Go pull-down menu

Select (left-click) library from that list.. 

Think now you can see those previously hidden files.   ?  

 

73
Dave KJ9I

 

From: John Stengrevics 
Reply-To: WSJT software development 
Date: Saturday, March 6, 2021 at 10:05 AM
To: Steven Franke 
Cc: WSJT software development 
Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

 

Steve,

 

I understand, but I can’t find the ~/Library/Preferences/ folder.  If I search 
my Mac for it, nothing comes up but “WSJT User Guide.”  I don’t see it anywhere.

 

Sorry to be so clueless here.

 

John

WA1EAZ



On Mar 6, 2021, at 10:54 AM, Steven Franke  wrote:

 

John, 

 

The file that Bill sent to you should be placed in the ~/Library/Preferences 
folder. This is the folder that your existing WSJT-X.ini file is located in. 
You should be able to open the ~/Library/Preferences folder and simply grab the 
attachment that Bill sent and drag it into that folder. When you are done you 
should see both WSJT-X.ini and wsjtx_log_config.ini next to (or near) each 
other in the list of files in that folder.

 

ut User Guide.73 Steve k9an



On Mar 6, 2021, at 9:43 AM, John Stengrevics  wrote:

 

Hi Steve,

 

Thanks for that.  

 

I have followed your suggestions.  However, I don’t see ~/Library/Preferences/ 
under WSJT.  (Bill had asked me to move a file that he sent 
(wsjt_log_config.ini) there for debugging purposes.)  Maybe move it to WSJT INI?

 

73,

 

John

WA1EAZ



On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel 
 wrote:

 

John, 

You can make the ~/Library folder visible in Finder with the following steps:

 

1. Open a Finder window.

2. Select your home directory in the left panel of the Finder window.

3. Select Show View Options under the “View” menu.

4. Check the “Show Library Folder” box.

 

Thereafter, your Library folder will always be visible.

 

73 Steve k9an



On Mar 6, 2021, at 8:36 AM, John Stengrevics  wrote:

 

Hi Bill,

 

I can’t find the ~/Library/Preferences/ directory in which to put the file.  
Can you provide a bit more detail on how I can locate it?  Sorry.

 

John

WA1EAZ



On Mar 6, 2021, at 9:20 AM, Bill Somerville  wrote:

 

Hi John,

 

so I can see what is happening put the attached file into the WSJT-X 
configuration files directory (~/Library/Preferences/ on macOS), restart 
WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do not 
turn off the rig until WSJT-X has exited). There will be a new file on your 
Desktop called WSJT-X_RigControl.log, send me that file for analysis please 
(g4wjs  classdesign  com)?

 

Once you have sent me the log file delete the wsjtx_log_config.ini and 
WSJT-X_RigControl.log files to resume normal operation.

 

73
Bill
G4WJS.

 

On 06/03/2021 14:13, John Stengrevics wrote:

Bill, 

 

I have CAT selected and it does connect when I click on Test.

 

John (G4KLA) had asked what driver I was using.  I replied that the driver had 
not changed.  It has always been  /dev/cu.usbserial-A503XYAO.

 

John

WA1EAZ



On Mar 6, 2021, at 9:07 AM, Bill Somerville  wrote:

 

Hi John,

 

which option do you have checked for "Preferences->Radio->PTT Method"?

 

73
Bill
G4WJS.

 

On 06/03/2021 14:03, John Stengrevics wrote:

Hi Bill, 

 

I just tried to use Q65 with “Cumulative" selected as you suggested.  However, 
the problem is still there as described below.  I have to shut down my 
transceiver (Elecraft K3S) to get it to stop transmitting.

 

Thanks,

 

John

WA1EAZ



On Mar 6, 2021, at 8:44 AM, Bill Somerville  wrote:

 

Hi John,

 

I am not sure as I have not investigated this issue yet. It is easy enough to 
check, select "Cumulative" for the 2D spectrum display, restart WSJT-X, and see 
if the iusse goes away.

 

73
Bill
G4WJS.

 

On 06/03/2021 13:25, John Stengrevics wrote:

Hi Bill, 

 

Will this fix solve the problem I reported yesterday with OS Big Sur?  I’ll 
repost below in case you didn’t see it.

 

Thanks,

 

John

WA1EAZ

 

Repost - some additions in red:  

 

John & Joe,

I had been using the previous version successfully on a MacBook Pro (Intel not 
M1) OS Big Sur 11.2.2.

Today, I downloaded Mac version 2.4.0-rc2.  

When running Q65, T/R = 30 seconds, Submode A, the program continues to 
transmit after the 30 second period is complete for 60 seconds total.  However, 
it does not seem to drive my amplifier after 30 seconds. [PTT is activated for 
the second 30 seconds, but no audio to drive the amp.]  I have since tried FT8 
on WSJT-X and can confirm that it works as usual.  Thus, the problem seems to 
be isolated to Q65.

I did follow the instructions in the Readme file.  

If there is a file I can send you, please let me know.

I would appreciate any suggestions you can provide.

Best 73,

John
WA1EAZ



On Mar 6, 2021, at 5:55 AM, Bill 

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Claude Frantz]

On 3/6/21 9:06 AM, Claude Frantz wrote:

Hi,


I cannot find the file
./doc/user_guide/en/images/Q65_6m_ionoscatter.png
in the source code from the repo. It's needed to build the doc.


For any reason unknown to me, the doc generated from 
./doc/user_guide/en/ is different from the doc found here:


https://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.4.0-rc2.html

There is not only this image missing, there are other differences too.

Anybody knows why ?

Best wishes,
Claude (DJ0OT)


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Steve,

I understand, but I can’t find the ~/Library/Preferences/ folder.  If I search 
my Mac for it, nothing comes up but “WSJT User Guide.”  I don’t see it anywhere.

Sorry to be so clueless here.

John
WA1EAZ

> On Mar 6, 2021, at 10:54 AM, Steven Franke  wrote:
> 
> John, 
> 
> The file that Bill sent to you should be placed in the ~/Library/Preferences 
> folder. This is the folder that your existing WSJT-X.ini file is located in. 
> You should be able to open the ~/Library/Preferences folder and simply grab 
> the attachment that Bill sent and drag it into that folder. When you are done 
> you should see both WSJT-X.ini and wsjtx_log_config.ini next to (or near) 
> each other in the list of files in that folder.
> 
> ut User Guide.73 Steve k9an
> 
>> On Mar 6, 2021, at 9:43 AM, John Stengrevics > > wrote:
>> 
>> Hi Steve,
>> 
>> Thanks for that.  
>> 
>> I have followed your suggestions.  However, I don’t see 
>> ~/Library/Preferences/ under WSJT.  (Bill had asked me to move a file that 
>> he sent (wsjt_log_config.ini) there for debugging purposes.)  Maybe move it 
>> to WSJT INI?
>> 
>> 73,
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel 
>>> >> > wrote:
>>> 
>>> John, 
>>> You can make the ~/Library folder visible in Finder with the following 
>>> steps:
>>> 
>>> 1. Open a Finder window.
>>> 2. Select your home directory in the left panel of the Finder window.
>>> 3. Select Show View Options under the “View” menu.
>>> 4. Check the “Show Library Folder” box.
>>> 
>>> Thereafter, your Library folder will always be visible.
>>> 
>>> 73 Steve k9an
>>> 
 On Mar 6, 2021, at 8:36 AM, John Stengrevics >>> > wrote:
 
 Hi Bill,
 
 I can’t find the ~/Library/Preferences/ directory in which to put the 
 file.  Can you provide a bit more detail on how I can locate it?  Sorry.
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 9:20 AM, Bill Somerville  > wrote:
> 
> Hi John,
> 
> so I can see what is happening put the attached file into the WSJT-X 
> configuration files directory (~/Library/Preferences/ on macOS), restart 
> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do 
> not turn off the rig until WSJT-X has exited). There will be a new file 
> on your Desktop called WSJT-X_RigControl.log, send me that file for 
> analysis please (g4wjs  classdesign  com)?
> 
> Once you have sent me the log file delete the wsjtx_log_config.ini and 
> WSJT-X_RigControl.log files to resume normal operation.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 14:13, John Stengrevics wrote:
>> Bill,
>> 
>> I have CAT selected and it does connect when I click on Test.
>> 
>> John (G4KLA) had asked what driver I was using.  I replied that the 
>> driver had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 9:07 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi John,
>>> 
>>> which option do you have checked for "Preferences->Radio->PTT Method"?
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 14:03, John Stengrevics wrote:
 Hi Bill,
 
 I just tried to use Q65 with “Cumulative" selected as you suggested.  
 However, the problem is still there as described below.  I have to 
 shut down my transceiver (Elecraft K3S) to get it to stop transmitting.
 
 Thanks,
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 8:44 AM, Bill Somerville  > wrote:
> 
> Hi John,
> 
> I am not sure as I have not investigated this issue yet. It is easy 
> enough to check, select "Cumulative" for the 2D spectrum display, 
> restart WSJT-X, and see if the iusse goes away.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 13:25, John Stengrevics wrote:
>> Hi Bill,
>> 
>> Will this fix solve the problem I reported yesterday with OS Big 
>> Sur?  I’ll repost below in case you didn’t see it.
>> 
>> Thanks,
>> 
>> John
>> WA1EAZ
>> 
>> Repost - some additions in red:  
>> 
>> John & Joe,
>> 
>> I had been using the previous version successfully on a MacBook Pro 
>> (Intel not M1) OS Big Sur 11.2.2.
>> 
>> Today, I downloaded Mac version 2.4.0-rc2.  
>> 
>> When running Q65, T/R = 30 seconds, Submode A, the program continues 
>> to transmit after the 30 second period is complete for 60 seconds 
>> total.  

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[Steven Franke via wsjt-devel]

John, 

The file that Bill sent to you should be placed in the ~/Library/Preferences 
folder. This is the folder that your existing WSJT-X.ini file is located in. 
You should be able to open the ~/Library/Preferences folder and simply grab the 
attachment that Bill sent and drag it into that folder. When you are done you 
should see both WSJT-X.ini and wsjtx_log_config.ini next to (or near) each 
other in the list of files in that folder.

73 Steve k9an

> On Mar 6, 2021, at 9:43 AM, John Stengrevics  wrote:
> 
> Hi Steve,
> 
> Thanks for that.  
> 
> I have followed your suggestions.  However, I don’t see 
> ~/Library/Preferences/ under WSJT.  (Bill had asked me to move a file that he 
> sent (wsjt_log_config.ini) there for debugging purposes.)  Maybe move it to 
> WSJT INI?
> 
> 73,
> 
> John
> WA1EAZ
> 
>> On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel 
>> mailto:wsjt-devel@lists.sourceforge.net>> 
>> wrote:
>> 
>> John, 
>> You can make the ~/Library folder visible in Finder with the following steps:
>> 
>> 1. Open a Finder window.
>> 2. Select your home directory in the left panel of the Finder window.
>> 3. Select Show View Options under the “View” menu.
>> 4. Check the “Show Library Folder” box.
>> 
>> Thereafter, your Library folder will always be visible.
>> 
>> 73 Steve k9an
>> 
>>> On Mar 6, 2021, at 8:36 AM, John Stengrevics >> > wrote:
>>> 
>>> Hi Bill,
>>> 
>>> I can’t find the ~/Library/Preferences/ directory in which to put the file. 
>>>  Can you provide a bit more detail on how I can locate it?  Sorry.
>>> 
>>> John
>>> WA1EAZ
>>> 
 On Mar 6, 2021, at 9:20 AM, Bill Somerville >>> > wrote:
 
 Hi John,
 
 so I can see what is happening put the attached file into the WSJT-X 
 configuration files directory (~/Library/Preferences/ on macOS), restart 
 WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do 
 not turn off the rig until WSJT-X has exited). There will be a new file on 
 your Desktop called WSJT-X_RigControl.log, send me that file for analysis 
 please (g4wjs  classdesign  com)?
 
 Once you have sent me the log file delete the wsjtx_log_config.ini and 
 WSJT-X_RigControl.log files to resume normal operation.
 
 73
 Bill
 G4WJS.
 
 On 06/03/2021 14:13, John Stengrevics wrote:
> Bill,
> 
> I have CAT selected and it does connect when I click on Test.
> 
> John (G4KLA) had asked what driver I was using.  I replied that the 
> driver had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
> 
> John
> WA1EAZ
> 
>> On Mar 6, 2021, at 9:07 AM, Bill Somerville > > wrote:
>> 
>> Hi John,
>> 
>> which option do you have checked for "Preferences->Radio->PTT Method"?
>> 
>> 73
>> Bill
>> G4WJS.
>> 
>> On 06/03/2021 14:03, John Stengrevics wrote:
>>> Hi Bill,
>>> 
>>> I just tried to use Q65 with “Cumulative" selected as you suggested.  
>>> However, the problem is still there as described below.  I have to shut 
>>> down my transceiver (Elecraft K3S) to get it to stop transmitting.
>>> 
>>> Thanks,
>>> 
>>> John
>>> WA1EAZ
>>> 
 On Mar 6, 2021, at 8:44 AM, Bill Somerville >>> > wrote:
 
 Hi John,
 
 I am not sure as I have not investigated this issue yet. It is easy 
 enough to check, select "Cumulative" for the 2D spectrum display, 
 restart WSJT-X, and see if the iusse goes away.
 
 73
 Bill
 G4WJS.
 
 On 06/03/2021 13:25, John Stengrevics wrote:
> Hi Bill,
> 
> Will this fix solve the problem I reported yesterday with OS Big Sur? 
>  I’ll repost below in case you didn’t see it.
> 
> Thanks,
> 
> John
> WA1EAZ
> 
> Repost - some additions in red:  
> 
> John & Joe,
> 
> I had been using the previous version successfully on a MacBook Pro 
> (Intel not M1) OS Big Sur 11.2.2.
> 
> Today, I downloaded Mac version 2.4.0-rc2.  
> 
> When running Q65, T/R = 30 seconds, Submode A, the program continues 
> to transmit after the 30 second period is complete for 60 seconds 
> total.  However, it does not seem to drive my amplifier after 30 
> seconds. [PTT is activated for the second 30 seconds, but no audio to 
> drive the amp.]  I have since tried FT8 on WSJT-X and can confirm 
> that it works as usual.  Thus, the problem seems to be isolated to 
> Q65.
> 
> I did follow the instructions in the Readme file.  
> 
> If there is a file I can send you, please let me know.
> 
> I 

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Hi Steve,

Thanks for that.  

I have followed your suggestions.  However, I don’t see ~/Library/Preferences/ 
under WSJT.  (Bill had asked me to move a file that he sent 
(wsjt_log_config.ini) there for debugging purposes.)  Maybe move it to WSJT INI?

73,

John
WA1EAZ

> On Mar 6, 2021, at 10:27 AM, Steven Franke via wsjt-devel 
>  wrote:
> 
> John, 
> You can make the ~/Library folder visible in Finder with the following steps:
> 
> 1. Open a Finder window.
> 2. Select your home directory in the left panel of the Finder window.
> 3. Select Show View Options under the “View” menu.
> 4. Check the “Show Library Folder” box.
> 
> Thereafter, your Library folder will always be visible.
> 
> 73 Steve k9an
> 
>> On Mar 6, 2021, at 8:36 AM, John Stengrevics > > wrote:
>> 
>> Hi Bill,
>> 
>> I can’t find the ~/Library/Preferences/ directory in which to put the file.  
>> Can you provide a bit more detail on how I can locate it?  Sorry.
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 9:20 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi John,
>>> 
>>> so I can see what is happening put the attached file into the WSJT-X 
>>> configuration files directory (~/Library/Preferences/ on macOS), restart 
>>> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do 
>>> not turn off the rig until WSJT-X has exited). There will be a new file on 
>>> your Desktop called WSJT-X_RigControl.log, send me that file for analysis 
>>> please (g4wjs  classdesign  com)?
>>> 
>>> Once you have sent me the log file delete the wsjtx_log_config.ini and 
>>> WSJT-X_RigControl.log files to resume normal operation.
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 14:13, John Stengrevics wrote:
 Bill,
 
 I have CAT selected and it does connect when I click on Test.
 
 John (G4KLA) had asked what driver I was using.  I replied that the driver 
 had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 9:07 AM, Bill Somerville  > wrote:
> 
> Hi John,
> 
> which option do you have checked for "Preferences->Radio->PTT Method"?
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 14:03, John Stengrevics wrote:
>> Hi Bill,
>> 
>> I just tried to use Q65 with “Cumulative" selected as you suggested.  
>> However, the problem is still there as described below.  I have to shut 
>> down my transceiver (Elecraft K3S) to get it to stop transmitting.
>> 
>> Thanks,
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 8:44 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi John,
>>> 
>>> I am not sure as I have not investigated this issue yet. It is easy 
>>> enough to check, select "Cumulative" for the 2D spectrum display, 
>>> restart WSJT-X, and see if the iusse goes away.
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 13:25, John Stengrevics wrote:
 Hi Bill,
 
 Will this fix solve the problem I reported yesterday with OS Big Sur?  
 I’ll repost below in case you didn’t see it.
 
 Thanks,
 
 John
 WA1EAZ
 
 Repost - some additions in red:  
 
 John & Joe,
 
 I had been using the previous version successfully on a MacBook Pro 
 (Intel not M1) OS Big Sur 11.2.2.
 
 Today, I downloaded Mac version 2.4.0-rc2.  
 
 When running Q65, T/R = 30 seconds, Submode A, the program continues 
 to transmit after the 30 second period is complete for 60 seconds 
 total.  However, it does not seem to drive my amplifier after 30 
 seconds. [PTT is activated for the second 30 seconds, but no audio to 
 drive the amp.]  I have since tried FT8 on WSJT-X and can confirm that 
 it works as usual.  Thus, the problem seems to be isolated to Q65.
 
 I did follow the instructions in the Readme file.  
 
 If there is a file I can send you, please let me know.
 
 I would appreciate any suggestions you can provide.
 
 Best 73,
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 5:55 AM, Bill Somerville  > wrote:
> 
> Hi Dave and Kevin,
> 
> we have finally tracked down the cause of this crash, thanks for your 
> patience it was not so easy to track down. It is repaired for the 
> next release, for now if you do not use of the Q65_Sync Wide Graph 
> synchronization plot the crash will be avoided. Note this is not a 
> Mac specific issue although it does seem to have the most severe 
> effects on that platform.
> 
> 

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[Steven Franke via wsjt-devel]

John, 
You can make the ~/Library folder visible in Finder with the following steps:

1. Open a Finder window.
2. Select your home directory in the left panel of the Finder window.
3. Select Show View Options under the “View” menu.
4. Check the “Show Library Folder” box.

Thereafter, your Library folder will always be visible.

73 Steve k9an

> On Mar 6, 2021, at 8:36 AM, John Stengrevics  wrote:
> 
> Hi Bill,
> 
> I can’t find the ~/Library/Preferences/ directory in which to put the file.  
> Can you provide a bit more detail on how I can locate it?  Sorry.
> 
> John
> WA1EAZ
> 
>> On Mar 6, 2021, at 9:20 AM, Bill Somerville > > wrote:
>> 
>> Hi John,
>> 
>> so I can see what is happening put the attached file into the WSJT-X 
>> configuration files directory (~/Library/Preferences/ on macOS), restart 
>> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do 
>> not turn off the rig until WSJT-X has exited). There will be a new file on 
>> your Desktop called WSJT-X_RigControl.log, send me that file for analysis 
>> please (g4wjs  classdesign  com)?
>> 
>> Once you have sent me the log file delete the wsjtx_log_config.ini and 
>> WSJT-X_RigControl.log files to resume normal operation.
>> 
>> 73
>> Bill
>> G4WJS.
>> 
>> On 06/03/2021 14:13, John Stengrevics wrote:
>>> Bill,
>>> 
>>> I have CAT selected and it does connect when I click on Test.
>>> 
>>> John (G4KLA) had asked what driver I was using.  I replied that the driver 
>>> had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
>>> 
>>> John
>>> WA1EAZ
>>> 
 On Mar 6, 2021, at 9:07 AM, Bill Somerville >>> > wrote:
 
 Hi John,
 
 which option do you have checked for "Preferences->Radio->PTT Method"?
 
 73
 Bill
 G4WJS.
 
 On 06/03/2021 14:03, John Stengrevics wrote:
> Hi Bill,
> 
> I just tried to use Q65 with “Cumulative" selected as you suggested.  
> However, the problem is still there as described below.  I have to shut 
> down my transceiver (Elecraft K3S) to get it to stop transmitting.
> 
> Thanks,
> 
> John
> WA1EAZ
> 
>> On Mar 6, 2021, at 8:44 AM, Bill Somerville > > wrote:
>> 
>> Hi John,
>> 
>> I am not sure as I have not investigated this issue yet. It is easy 
>> enough to check, select "Cumulative" for the 2D spectrum display, 
>> restart WSJT-X, and see if the iusse goes away.
>> 
>> 73
>> Bill
>> G4WJS.
>> 
>> On 06/03/2021 13:25, John Stengrevics wrote:
>>> Hi Bill,
>>> 
>>> Will this fix solve the problem I reported yesterday with OS Big Sur?  
>>> I’ll repost below in case you didn’t see it.
>>> 
>>> Thanks,
>>> 
>>> John
>>> WA1EAZ
>>> 
>>> Repost - some additions in red:  
>>> 
>>> John & Joe,
>>> 
>>> I had been using the previous version successfully on a MacBook Pro 
>>> (Intel not M1) OS Big Sur 11.2.2.
>>> 
>>> Today, I downloaded Mac version 2.4.0-rc2.  
>>> 
>>> When running Q65, T/R = 30 seconds, Submode A, the program continues to 
>>> transmit after the 30 second period is complete for 60 seconds total.  
>>> However, it does not seem to drive my amplifier after 30 seconds. [PTT 
>>> is activated for the second 30 seconds, but no audio to drive the amp.] 
>>>  I have since tried FT8 on WSJT-X and can confirm that it works as 
>>> usual.  Thus, the problem seems to be isolated to Q65.
>>> 
>>> I did follow the instructions in the Readme file.  
>>> 
>>> If there is a file I can send you, please let me know.
>>> 
>>> I would appreciate any suggestions you can provide.
>>> 
>>> Best 73,
>>> 
>>> John
>>> WA1EAZ
>>> 
 On Mar 6, 2021, at 5:55 AM, Bill Somerville >>> > wrote:
 
 Hi Dave and Kevin,
 
 we have finally tracked down the cause of this crash, thanks for your 
 patience it was not so easy to track down. It is repaired for the next 
 release, for now if you do not use of the Q65_Sync Wide Graph 
 synchronization plot the crash will be avoided. Note this is not a Mac 
 specific issue although it does seem to have the most severe effects 
 on that platform.
 
 73
 Bill
 G4WJS.
 
 On 06/03/2021 03:59, David Schmocker wrote:
> Hello all,
> 
> A second report that mirrors this one:WSJT-X 2.4.0rc2
> 
> OS 10.14.6,  Mac Mini
> 
> Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT 
> line to K3S radio (even after Tx period).   (when I go into Radio 
> Panel, the Test PTT Red bar stays on, won't easily release).
> 
> Then when a decode should take 

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Dave, 

Thanks for trying to help.  But, I am ashamed to admit that none of that makes 
any sense to me.  Sorry.

John
WA1EAZ

> On Mar 6, 2021, at 9:56 AM, David Tiller  wrote:
> 
> John,
> 
> ~/Library is usually a hidden directory in the finder. I made a symlink to it 
> called 'libr' that I use to get to it via the finder. You can see the Library 
> directory in terminal, so if you want to cp the file from a terminal session, 
> you can.
> 
> To create a symbolic link, in terminal type:
> 
> ln -s Library libr
> 
> Once created, you can see libr in finder and click into it.
> 
> 73 de K4DET
> 
>> On Mar 6, 2021, at 9:36 AM, John Stengrevics > > wrote:
>> 
>> Hi Bill,
>> 
>> I can’t find the ~/Library/Preferences/ directory in which to put the file.  
>> Can you provide a bit more detail on how I can locate it?  Sorry.
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 9:20 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi John,
>>> 
>>> so I can see what is happening put the attached file into the WSJT-X 
>>> configuration files directory (~/Library/Preferences/ on macOS), restart 
>>> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do 
>>> not turn off the rig until WSJT-X has exited). There will be a new file on 
>>> your Desktop called WSJT-X_RigControl.log, send me that file for analysis 
>>> please (g4wjs  classdesign  com)?
>>> 
>>> Once you have sent me the log file delete the wsjtx_log_config.ini and 
>>> WSJT-X_RigControl.log files to resume normal operation.
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 14:13, John Stengrevics wrote:
 Bill,
 
 I have CAT selected and it does connect when I click on Test.
 
 John (G4KLA) had asked what driver I was using.  I replied that the driver 
 had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 9:07 AM, Bill Somerville  > wrote:
> 
> Hi John,
> 
> which option do you have checked for "Preferences->Radio->PTT Method"?
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 14:03, John Stengrevics wrote:
>> Hi Bill,
>> 
>> I just tried to use Q65 with “Cumulative" selected as you suggested.  
>> However, the problem is still there as described below.  I have to shut 
>> down my transceiver (Elecraft K3S) to get it to stop transmitting.
>> 
>> Thanks,
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 8:44 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi John,
>>> 
>>> I am not sure as I have not investigated this issue yet. It is easy 
>>> enough to check, select "Cumulative" for the 2D spectrum display, 
>>> restart WSJT-X, and see if the iusse goes away.
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 13:25, John Stengrevics wrote:
 Hi Bill,
 
 Will this fix solve the problem I reported yesterday with OS Big Sur?  
 I’ll repost below in case you didn’t see it.
 
 Thanks,
 
 John
 WA1EAZ
 
 Repost - some additions in red:  
 
 John & Joe,
 
 I had been using the previous version successfully on a MacBook Pro 
 (Intel not M1) OS Big Sur 11.2.2.
 
 Today, I downloaded Mac version 2.4.0-rc2.  
 
 When running Q65, T/R = 30 seconds, Submode A, the program continues 
 to transmit after the 30 second period is complete for 60 seconds 
 total.  However, it does not seem to drive my amplifier after 30 
 seconds. [PTT is activated for the second 30 seconds, but no audio to 
 drive the amp.]  I have since tried FT8 on WSJT-X and can confirm that 
 it works as usual.  Thus, the problem seems to be isolated to Q65.
 
 I did follow the instructions in the Readme file.  
 
 If there is a file I can send you, please let me know.
 
 I would appreciate any suggestions you can provide.
 
 Best 73,
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 5:55 AM, Bill Somerville  > wrote:
> 
> Hi Dave and Kevin,
> 
> we have finally tracked down the cause of this crash, thanks for your 
> patience it was not so easy to track down. It is repaired for the 
> next release, for now if you do not use of the Q65_Sync Wide Graph 
> synchronization plot the crash will be avoided. Note this is not a 
> Mac specific issue although it does seem to have the most severe 
> effects on that platform.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 03:59, David Schmocker wrote:
>> 

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[David Tiller]

John,

~/Library is usually a hidden directory in the finder. I made a symlink to it 
called 'libr' that I use to get to it via the finder. You can see the Library 
directory in terminal, so if you want to cp the file from a terminal session, 
you can.

To create a symbolic link, in terminal type:

ln -s Library libr

Once created, you can see libr in finder and click into it.

73 de K4DET

> On Mar 6, 2021, at 9:36 AM, John Stengrevics  wrote:
> 
> Hi Bill,
> 
> I can’t find the ~/Library/Preferences/ directory in which to put the file.  
> Can you provide a bit more detail on how I can locate it?  Sorry.
> 
> John
> WA1EAZ
> 
>> On Mar 6, 2021, at 9:20 AM, Bill Somerville > > wrote:
>> 
>> Hi John,
>> 
>> so I can see what is happening put the attached file into the WSJT-X 
>> configuration files directory (~/Library/Preferences/ on macOS), restart 
>> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do 
>> not turn off the rig until WSJT-X has exited). There will be a new file on 
>> your Desktop called WSJT-X_RigControl.log, send me that file for analysis 
>> please (g4wjs  classdesign  com)?
>> 
>> Once you have sent me the log file delete the wsjtx_log_config.ini and 
>> WSJT-X_RigControl.log files to resume normal operation.
>> 
>> 73
>> Bill
>> G4WJS.
>> 
>> On 06/03/2021 14:13, John Stengrevics wrote:
>>> Bill,
>>> 
>>> I have CAT selected and it does connect when I click on Test.
>>> 
>>> John (G4KLA) had asked what driver I was using.  I replied that the driver 
>>> had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
>>> 
>>> John
>>> WA1EAZ
>>> 
 On Mar 6, 2021, at 9:07 AM, Bill Somerville >>> > wrote:
 
 Hi John,
 
 which option do you have checked for "Preferences->Radio->PTT Method"?
 
 73
 Bill
 G4WJS.
 
 On 06/03/2021 14:03, John Stengrevics wrote:
> Hi Bill,
> 
> I just tried to use Q65 with “Cumulative" selected as you suggested.  
> However, the problem is still there as described below.  I have to shut 
> down my transceiver (Elecraft K3S) to get it to stop transmitting.
> 
> Thanks,
> 
> John
> WA1EAZ
> 
>> On Mar 6, 2021, at 8:44 AM, Bill Somerville > > wrote:
>> 
>> Hi John,
>> 
>> I am not sure as I have not investigated this issue yet. It is easy 
>> enough to check, select "Cumulative" for the 2D spectrum display, 
>> restart WSJT-X, and see if the iusse goes away.
>> 
>> 73
>> Bill
>> G4WJS.
>> 
>> On 06/03/2021 13:25, John Stengrevics wrote:
>>> Hi Bill,
>>> 
>>> Will this fix solve the problem I reported yesterday with OS Big Sur?  
>>> I’ll repost below in case you didn’t see it.
>>> 
>>> Thanks,
>>> 
>>> John
>>> WA1EAZ
>>> 
>>> Repost - some additions in red:  
>>> 
>>> John & Joe,
>>> 
>>> I had been using the previous version successfully on a MacBook Pro 
>>> (Intel not M1) OS Big Sur 11.2.2.
>>> 
>>> Today, I downloaded Mac version 2.4.0-rc2.  
>>> 
>>> When running Q65, T/R = 30 seconds, Submode A, the program continues to 
>>> transmit after the 30 second period is complete for 60 seconds total.  
>>> However, it does not seem to drive my amplifier after 30 seconds. [PTT 
>>> is activated for the second 30 seconds, but no audio to drive the amp.] 
>>>  I have since tried FT8 on WSJT-X and can confirm that it works as 
>>> usual.  Thus, the problem seems to be isolated to Q65.
>>> 
>>> I did follow the instructions in the Readme file.  
>>> 
>>> If there is a file I can send you, please let me know.
>>> 
>>> I would appreciate any suggestions you can provide.
>>> 
>>> Best 73,
>>> 
>>> John
>>> WA1EAZ
>>> 
 On Mar 6, 2021, at 5:55 AM, Bill Somerville >>> > wrote:
 
 Hi Dave and Kevin,
 
 we have finally tracked down the cause of this crash, thanks for your 
 patience it was not so easy to track down. It is repaired for the next 
 release, for now if you do not use of the Q65_Sync Wide Graph 
 synchronization plot the crash will be avoided. Note this is not a Mac 
 specific issue although it does seem to have the most severe effects 
 on that platform.
 
 73
 Bill
 G4WJS.
 
 On 06/03/2021 03:59, David Schmocker wrote:
> Hello all,
> 
> A second report that mirrors this one:WSJT-X 2.4.0rc2
> 
> OS 10.14.6,  Mac Mini
> 
> Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT 
> line to K3S radio (even after Tx period).   (when I go into Radio 
> Panel, the Test PTT Red bar stays on, won't easily release).

Re: [wsjt-devel] Receipt of 73 after RR73 sent triggers a 73 reply from CQ caller

[Neil Zampella]

Got it ... :)

Neil, KN3ILZ

On 3/6/2021 8:30 AM, Bill Somerville wrote:

On 06/03/2021 14:21, Neil Zampella wrote:

Hi,

I just installed 2.4.0-RC2 and found an issue with the auto sequencing
after an RR73 is sent.    Normally, I'll click on the Enable Tx right
after I send the RR73 so that the CQ call is immediately sent as the
next Tx time slice comes up.    I have the setting to clear the standard
messages checked.

However, when doing this in RC2, and a 73 reply is sent back from the
QSO partner,  RC2 will repopulate the standard messages, then send a 73
instead of the CQ call.

See attached screen capture.   Considering that this fix was intended to
be included in v2.3.1, I figured I had better report this ASAP.   If
you need more info, please let me know.    I'm not the only person
seeing this, as this was also mentioned on a FB page by another operator
earlier this morning.

Cheers,

Neil, KN3ILZ


Hi Neil,

thanks for reporting this issue, see my reply on the WSJTX Groups.io
list:

https://wsjtx.groups.io/g/main/message/22948

73
Bill
G4WJS.






___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Click on a CQ and Get the Wrong Station

[Gary Rogers]

Definitely double click

> On Mar 5, 2021, at 9:43 PM, Gary McDuffie  wrote:
> 
> 
> 
>> On Mar 5, 2021, at 18:32, Dennis Younker NE6I  wrote:
>> 
>> I am clicking on the station I want in the left pane (Band Activity).
> 
> I assume you are DOUBLE clicking, not single clicking as you seem to be 
> saying?
> 
> Gary - AG0N
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Hi Bill,

I can’t find the ~/Library/Preferences/ directory in which to put the file.  
Can you provide a bit more detail on how I can locate it?  Sorry.

John
WA1EAZ

> On Mar 6, 2021, at 9:20 AM, Bill Somerville  wrote:
> 
> Hi John,
> 
> so I can see what is happening put the attached file into the WSJT-X 
> configuration files directory (~/Library/Preferences/ on macOS), restart 
> WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X (do not 
> turn off the rig until WSJT-X has exited). There will be a new file on your 
> Desktop called WSJT-X_RigControl.log, send me that file for analysis please 
> (g4wjs  classdesign  com)?
> 
> Once you have sent me the log file delete the wsjtx_log_config.ini and 
> WSJT-X_RigControl.log files to resume normal operation.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 14:13, John Stengrevics wrote:
>> Bill,
>> 
>> I have CAT selected and it does connect when I click on Test.
>> 
>> John (G4KLA) had asked what driver I was using.  I replied that the driver 
>> had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 9:07 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi John,
>>> 
>>> which option do you have checked for "Preferences->Radio->PTT Method"?
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 14:03, John Stengrevics wrote:
 Hi Bill,
 
 I just tried to use Q65 with “Cumulative" selected as you suggested.  
 However, the problem is still there as described below.  I have to shut 
 down my transceiver (Elecraft K3S) to get it to stop transmitting.
 
 Thanks,
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 8:44 AM, Bill Somerville  > wrote:
> 
> Hi John,
> 
> I am not sure as I have not investigated this issue yet. It is easy 
> enough to check, select "Cumulative" for the 2D spectrum display, restart 
> WSJT-X, and see if the iusse goes away.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 13:25, John Stengrevics wrote:
>> Hi Bill,
>> 
>> Will this fix solve the problem I reported yesterday with OS Big Sur?  
>> I’ll repost below in case you didn’t see it.
>> 
>> Thanks,
>> 
>> John
>> WA1EAZ
>> 
>> Repost - some additions in red:  
>> 
>> John & Joe,
>> 
>> I had been using the previous version successfully on a MacBook Pro 
>> (Intel not M1) OS Big Sur 11.2.2.
>> 
>> Today, I downloaded Mac version 2.4.0-rc2.  
>> 
>> When running Q65, T/R = 30 seconds, Submode A, the program continues to 
>> transmit after the 30 second period is complete for 60 seconds total.  
>> However, it does not seem to drive my amplifier after 30 seconds. [PTT 
>> is activated for the second 30 seconds, but no audio to drive the amp.]  
>> I have since tried FT8 on WSJT-X and can confirm that it works as usual. 
>>  Thus, the problem seems to be isolated to Q65.
>> 
>> I did follow the instructions in the Readme file.  
>> 
>> If there is a file I can send you, please let me know.
>> 
>> I would appreciate any suggestions you can provide.
>> 
>> Best 73,
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 5:55 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi Dave and Kevin,
>>> 
>>> we have finally tracked down the cause of this crash, thanks for your 
>>> patience it was not so easy to track down. It is repaired for the next 
>>> release, for now if you do not use of the Q65_Sync Wide Graph 
>>> synchronization plot the crash will be avoided. Note this is not a Mac 
>>> specific issue although it does seem to have the most severe effects on 
>>> that platform.
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 03:59, David Schmocker wrote:
 Hello all,
 
 A second report that mirrors this one:WSJT-X 2.4.0rc2
 
 OS 10.14.6,  Mac Mini
 
 Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT 
 line to K3S radio (even after Tx period).   (when I go into Radio 
 Panel, the Test PTT Red bar stays on, won't easily release).
 
 Then when a decode should take place, I get a crash exactly as Kevin 
 reported with the same exact message as reported below.
 
 Thank you,   73,
 
 Dave KJ9I
 
 
 
 On 3/5/21, 8:47 PM, "Kevin McQuiggin">>> >  wrote:
 
 Hi All:
 I tried submitting this earlier today, but it didn’t seem to make 
 to the list.  Hence, a re-submission:
 
 Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.
 
 Selection of “Q65_Sync” from 

Re: [wsjt-devel] Receipt of 73 after RR73 sent triggers a 73 reply from CQ caller

[Bill Somerville]

On 06/03/2021 14:21, Neil Zampella wrote:

Hi,

I just installed 2.4.0-RC2 and found an issue with the auto sequencing
after an RR73 is sent.    Normally, I'll click on the Enable Tx right
after I send the RR73 so that the CQ call is immediately sent as the
next Tx time slice comes up.    I have the setting to clear the standard
messages checked.

However, when doing this in RC2, and a 73 reply is sent back from the
QSO partner,  RC2 will repopulate the standard messages, then send a 73
instead of the CQ call.

See attached screen capture.   Considering that this fix was intended to
be included in v2.3.1, I figured I had better report this ASAP.   If
you need more info, please let me know.    I'm not the only person
seeing this, as this was also mentioned on a FB page by another operator
earlier this morning.

Cheers,

Neil, KN3ILZ 


Hi Neil,

thanks for reporting this issue, see my reply on the WSJTX Groups.io list:

https://wsjtx.groups.io/g/main/message/22948

73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[Bill Somerville]

On 06/03/2021 14:24, David Schmocker wrote:


Good morning everyone

OS 10.14.6 here (Intel )..  I saw in 2.4.0rc2 installation 
instructions we must uninstall then reinstall the drivers to the radio.
For my application, this is the USB-CODEC inside the K3S radio.. I am 
currently trying to figure out how to uninstall then reinstall this 
driver Hoping it fixes the (hang-on PTT) issue I also have


73,
Dave


Hi Dave,

where are you reading instructions to reinstall drivers?

73
Bill
G4WJS.

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[David Schmocker]

Good morning everyone 

OS 10.14.6 here (Intel )..  I saw in 2.4.0rc2 installation instructions we must 
uninstall then reinstall the drivers to the radio.
For my application, this is the USB-CODEC inside the K3S radio.. I am currently 
trying to figure out how to uninstall then reinstall this driver Hoping it 
fixes the (hang-on PTT) issue I also have

 

73,
Dave

 

From: John Stengrevics 
Reply-To: WSJT software development 
Date: Saturday, March 6, 2021 at 8:15 AM
To: WSJT software development 
Subject: Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

 

Bill,

 

I have CAT selected and it does connect when I click on Test.

 

John (G4KLA) had asked what driver I was using.  I replied that the driver had 
not changed.  It has always been  /dev/cu.usbserial-A503XYAO.

 

John

WA1EAZ



On Mar 6, 2021, at 9:07 AM, Bill Somerville  wrote:

 

Hi John,

 

which option do you have checked for "Preferences->Radio->PTT Method"?

 

73
Bill
G4WJS.

 

On 06/03/2021 14:03, John Stengrevics wrote:

Hi Bill, 

 

I just tried to use Q65 with “Cumulative" selected as you suggested.  However, 
the problem is still there as described below.  I have to shut down my 
transceiver (Elecraft K3S) to get it to stop transmitting.

 

Thanks,

 

John

WA1EAZ



On Mar 6, 2021, at 8:44 AM, Bill Somerville  wrote:

 

Hi John,

 

I am not sure as I have not investigated this issue yet. It is easy enough to 
check, select "Cumulative" for the 2D spectrum display, restart WSJT-X, and see 
if the iusse goes away.

 

73
Bill
G4WJS.

 

On 06/03/2021 13:25, John Stengrevics wrote:

Hi Bill, 

 

Will this fix solve the problem I reported yesterday with OS Big Sur?  I’ll 
repost below in case you didn’t see it.

 

Thanks,

 

John

WA1EAZ

 

Repost - some additions in red:  

 

John & Joe,

I had been using the previous version successfully on a MacBook Pro (Intel not 
M1) OS Big Sur 11.2.2.

Today, I downloaded Mac version 2.4.0-rc2.  

When running Q65, T/R = 30 seconds, Submode A, the program continues to 
transmit after the 30 second period is complete for 60 seconds total.  However, 
it does not seem to drive my amplifier after 30 seconds. [PTT is activated for 
the second 30 seconds, but no audio to drive the amp.]  I have since tried FT8 
on WSJT-X and can confirm that it works as usual.  Thus, the problem seems to 
be isolated to Q65.

I did follow the instructions in the Readme file.  

If there is a file I can send you, please let me know.

I would appreciate any suggestions you can provide.

Best 73,

John
WA1EAZ



On Mar 6, 2021, at 5:55 AM, Bill Somerville  wrote:

 

Hi Dave and Kevin,

we have finally tracked down the cause of this crash, thanks for your patience 
it was not so easy to track down. It is repaired for the next release, for now 
if you do not use of the Q65_Sync Wide Graph synchronization plot the crash 
will be avoided. Note this is not a Mac specific issue although it does seem to 
have the most severe effects on that platform.

73
Bill
G4WJS.

On 06/03/2021 03:59, David Schmocker wrote:


Hello all,

A second report that mirrors this one:WSJT-X 2.4.0rc2

OS 10.14.6,  Mac Mini

Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT line to K3S 
radio (even after Tx period).   (when I go into Radio Panel, the Test PTT Red 
bar stays on, won't easily release).

Then when a decode should take place, I get a crash exactly as Kevin reported 
with the same exact message as reported below.

Thank you,   73,

Dave KJ9I



On 3/5/21, 8:47 PM, "Kevin McQuiggin"  wrote:

Hi All:
I tried submitting this earlier today, but it didn’t seem to make to the 
list.  Hence, a re-submission:

Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.

Selection of “Q65_Sync” from dropdown box on the wide graph causes a crash 
as soon as the application starts to TX.  Selection of “Cumulative” (the 
default) and TX/RX are normal.

Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.

I have saved the crash dump and can provide as necessary.

73,

Kevin VE7ZD

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

 

___ wsjt-devel mailing list 
wsjt-devel@lists.sourceforge.net 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Receipt of 73 after RR73 sent triggers a 73 reply from CQ caller

[Neil Zampella]

Hi,

I just installed 2.4.0-RC2 and found an issue with the auto sequencing
after an RR73 is sent.    Normally, I'll click on the Enable Tx right
after I send the RR73 so that the CQ call is immediately sent as the
next Tx time slice comes up.    I have the setting to clear the standard
messages checked.

However, when doing this in RC2, and a 73 reply is sent back from the
QSO partner,  RC2 will repopulate the standard messages, then send a 73
instead of the CQ call.

See attached screen capture.   Considering that this fix was intended to
be included in v2.3.1, I figured I had better report this ASAP.     If
you need more info, please let me know.    I'm not the only person
seeing this, as this was also mentioned on a FB page by another operator
earlier this morning.

Cheers,

Neil, KN3ILZ

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[Bill Somerville]

Hi John,

so I can see what is happening put the attached file into the WSJT-X 
configuration files directory (~/Library/Preferences/ on macOS), restart 
WSJT-X, run a minimal test to demonstrate the issue, then quit WSJT-X 
(do not turn off the rig until WSJT-X has exited). There will be a new 
file on your Desktop called WSJT-X_RigControl.log, send me that file for 
analysis please (g4wjs  classdesign  com)?


Once you have sent me the log file delete the wsjtx_log_config.ini and 
WSJT-X_RigControl.log files to resume normal operation.


73
Bill
G4WJS.

On 06/03/2021 14:13, John Stengrevics wrote:

Bill,

I have CAT selected and it does connect when I click on Test.

John (G4KLA) had asked what driver I was using.  I replied that the 
driver had not changed.  It has always been  /dev/cu.usbserial-A503XYAO.


John
WA1EAZ

On Mar 6, 2021, at 9:07 AM, Bill Somerville > wrote:


Hi John,

which option do you have checked for "Preferences->Radio->PTT Method"?

73
Bill
G4WJS.

On 06/03/2021 14:03, John Stengrevics wrote:

Hi Bill,

I just tried to use Q65 with “Cumulative" selected as you suggested. 
 However, the problem is still there as described below.  I have to 
shut down my transceiver (Elecraft K3S) to get it to stop transmitting.


Thanks,

John
WA1EAZ

On Mar 6, 2021, at 8:44 AM, Bill Somerville > wrote:


Hi John,

I am not sure as I have not investigated this issue yet. It is easy 
enough to check, select "Cumulative" for the 2D spectrum display, 
restart WSJT-X, and see if the iusse goes away.


73
Bill
G4WJS.

On 06/03/2021 13:25, John Stengrevics wrote:

Hi Bill,

Will this fix solve the problem I reported yesterday with OS Big 
Sur?  I’ll repost below in case you didn’t see it.


Thanks,

John
WA1EAZ

Repost - some additions in red:

John & Joe,

I had been using the previous version successfully on a MacBook 
Pro (Intel not M1) OS Big Sur 11.2.2.


Today, I downloaded Mac version 2.4.0-rc2.

When running Q65, T/R = 30 seconds, Submode A, the program 
continues to transmit after the 30 second period is complete for 
60 seconds total.  However, it does not seem to drive my amplifier 
after 30 seconds.[PTT is activated for the second 30 seconds, but 
no audio to drive the amp.]  I have since tried FT8 on WSJT-X and 
can confirm that it works as usual.  Thus, the problem seems to be 
isolated to Q65.


I did follow the instructions in the Readme file.

If there is a file I can send you, please let me know.

I would appreciate any suggestions you can provide.

Best 73,

John
WA1EAZ

On Mar 6, 2021, at 5:55 AM, Bill Somerville 
mailto:g4...@classdesign.com>> wrote:


Hi Dave and Kevin,

we have finally tracked down the cause of this crash, thanks for 
your patience it was not so easy to track down. It is repaired 
for the next release, for now if you do not use of the Q65_Sync 
Wide Graph synchronization plot the crash will be avoided. Note 
this is not a Mac specific issue although it does seem to have 
the most severe effects on that platform.


73
Bill
G4WJS.

On 06/03/2021 03:59, David Schmocker wrote:

Hello all,

A second report that mirrors this one:    WSJT-X 2.4.0rc2

OS 10.14.6,  Mac Mini

Mode Q65,    Waterfall Q65_ Sync selected and slow to let go of 
PTT line to K3S radio (even after Tx period).   (when I go into 
Radio Panel, the Test PTT Red bar stays on, won't easily release).


Then when a decode should take place, I get a crash exactly as 
Kevin reported with the same exact message as reported below.


Thank you,   73,

Dave KJ9I



On 3/5/21, 8:47 PM, "Kevin McQuiggin">  wrote:


Hi All:
I tried submitting this earlier today, but it didn’t seem to 
make to the list.  Hence, a re-submission:


Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.

Selection of “Q65_Sync” from dropdown box on the wide graph 
causes a crash as soon as the application starts to TX. 
 Selection of “Cumulative” (the default) and TX/RX are normal.


Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.

I have saved the crash dump and can provide as necessary.

73,

Kevin VE7ZD



[Sinks.SYSLOG]
Destination=TextFile
Asynchronous=true
AutoFlush=false
FileName="${AppLocalDataLocation}/wsjtx_syslog.log"
TargetFileName="${AppLocalDataLocation}/logs/wsjtx_syslog_%Y-%m.log"
RotationTimePoint="01 00:00:00"
Append=true
EnableFinalRotation=false
MaxSize=41943040
MinFreeSpace=1073741824
MaxFiles=12
Target="${AppLocalDataLocation}/logs"
ScanForFiles="Matching"
Format="[%Channel%][%TimeStamp(format=\"%Y-%m-%d 
%H:%M:%S.%f\")%][%Uptime(format=\"%O:%M:%S.%f\")%][%Severity%] %Message%"
Filter="%Severity% >= info"

[Sinks.RIGCTRL]
Destination=TextFile
Asynchronous=true
AutoFlush=true
FileName="${DesktopLocation}/WSJT-X_RigControl.log"
Append=true
Format="[%TimeStamp(format=\"%Y-%m-%d 
%H:%M:%S.%f\")%][%Uptime(format=\"%O:%M:%S.%f\")%][%Channel%:%Severity%] 
%Message%"
Filter="%Channel% matches 

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Bill,

I have CAT selected and it does connect when I click on Test.

John (G4KLA) had asked what driver I was using.  I replied that the driver had 
not changed.  It has always been  /dev/cu.usbserial-A503XYAO.

John
WA1EAZ

> On Mar 6, 2021, at 9:07 AM, Bill Somerville  wrote:
> 
> Hi John,
> 
> which option do you have checked for "Preferences->Radio->PTT Method"?
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 14:03, John Stengrevics wrote:
>> Hi Bill,
>> 
>> I just tried to use Q65 with “Cumulative" selected as you suggested.  
>> However, the problem is still there as described below.  I have to shut down 
>> my transceiver (Elecraft K3S) to get it to stop transmitting.
>> 
>> Thanks,
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 8:44 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi John,
>>> 
>>> I am not sure as I have not investigated this issue yet. It is easy enough 
>>> to check, select "Cumulative" for the 2D spectrum display, restart WSJT-X, 
>>> and see if the iusse goes away.
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 13:25, John Stengrevics wrote:
 Hi Bill,
 
 Will this fix solve the problem I reported yesterday with OS Big Sur?  
 I’ll repost below in case you didn’t see it.
 
 Thanks,
 
 John
 WA1EAZ
 
 Repost - some additions in red:  
 
 John & Joe,
 
 I had been using the previous version successfully on a MacBook Pro (Intel 
 not M1) OS Big Sur 11.2.2.
 
 Today, I downloaded Mac version 2.4.0-rc2.  
 
 When running Q65, T/R = 30 seconds, Submode A, the program continues to 
 transmit after the 30 second period is complete for 60 seconds total.  
 However, it does not seem to drive my amplifier after 30 seconds. [PTT is 
 activated for the second 30 seconds, but no audio to drive the amp.]  I 
 have since tried FT8 on WSJT-X and can confirm that it works as usual.  
 Thus, the problem seems to be isolated to Q65.
 
 I did follow the instructions in the Readme file.  
 
 If there is a file I can send you, please let me know.
 
 I would appreciate any suggestions you can provide.
 
 Best 73,
 
 John
 WA1EAZ
 
> On Mar 6, 2021, at 5:55 AM, Bill Somerville  > wrote:
> 
> Hi Dave and Kevin,
> 
> we have finally tracked down the cause of this crash, thanks for your 
> patience it was not so easy to track down. It is repaired for the next 
> release, for now if you do not use of the Q65_Sync Wide Graph 
> synchronization plot the crash will be avoided. Note this is not a Mac 
> specific issue although it does seem to have the most severe effects on 
> that platform.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 03:59, David Schmocker wrote:
>> Hello all,
>> 
>> A second report that mirrors this one:WSJT-X 2.4.0rc2
>> 
>> OS 10.14.6,  Mac Mini
>> 
>> Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT line 
>> to K3S radio (even after Tx period).   (when I go into Radio Panel, the 
>> Test PTT Red bar stays on, won't easily release).
>> 
>> Then when a decode should take place, I get a crash exactly as Kevin 
>> reported with the same exact message as reported below.
>> 
>> Thank you,   73,
>> 
>> Dave KJ9I
>> 
>> 
>> 
>> On 3/5/21, 8:47 PM, "Kevin McQuiggin"> >  wrote:
>> 
>> Hi All:
>> I tried submitting this earlier today, but it didn’t seem to make to 
>> the list.  Hence, a re-submission:
>> 
>> Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.
>> 
>> Selection of “Q65_Sync” from dropdown box on the wide graph causes a 
>> crash as soon as the application starts to TX.  Selection of 
>> “Cumulative” (the default) and TX/RX are normal.
>> 
>> Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.
>> 
>> I have saved the crash dump and can provide as necessary.
>> 
>> 73,
>> 
>> Kevin VE7ZD
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[Bill Somerville]

Hi John,

which option do you have checked for "Preferences->Radio->PTT Method"?

73
Bill
G4WJS.

On 06/03/2021 14:03, John Stengrevics wrote:

Hi Bill,

I just tried to use Q65 with “Cumulative" selected as you suggested. 
 However, the problem is still there as described below.  I have to 
shut down my transceiver (Elecraft K3S) to get it to stop transmitting.


Thanks,

John
WA1EAZ

On Mar 6, 2021, at 8:44 AM, Bill Somerville > wrote:


Hi John,

I am not sure as I have not investigated this issue yet. It is easy 
enough to check, select "Cumulative" for the 2D spectrum display, 
restart WSJT-X, and see if the iusse goes away.


73
Bill
G4WJS.

On 06/03/2021 13:25, John Stengrevics wrote:

Hi Bill,

Will this fix solve the problem I reported yesterday with OS Big 
Sur?  I’ll repost below in case you didn’t see it.


Thanks,

John
WA1EAZ

Repost - some additions in red:

John & Joe,

I had been using the previous version successfully on a MacBook Pro 
(Intel not M1) OS Big Sur 11.2.2.


Today, I downloaded Mac version 2.4.0-rc2.

When running Q65, T/R = 30 seconds, Submode A, the program continues 
to transmit after the 30 second period is complete for 60 seconds 
total.  However, it does not seem to drive my amplifier after 30 
seconds.[PTT is activated for the second 30 seconds, but no audio to 
drive the amp.]  I have since tried FT8 on WSJT-X and can confirm 
that it works as usual.  Thus, the problem seems to be isolated to Q65.


I did follow the instructions in the Readme file.

If there is a file I can send you, please let me know.

I would appreciate any suggestions you can provide.

Best 73,

John
WA1EAZ

On Mar 6, 2021, at 5:55 AM, Bill Somerville > wrote:


Hi Dave and Kevin,

we have finally tracked down the cause of this crash, thanks for 
your patience it was not so easy to track down. It is repaired for 
the next release, for now if you do not use of the Q65_Sync Wide 
Graph synchronization plot the crash will be avoided. Note this is 
not a Mac specific issue although it does seem to have the most 
severe effects on that platform.


73
Bill
G4WJS.

On 06/03/2021 03:59, David Schmocker wrote:

Hello all,

A second report that mirrors this one:    WSJT-X 2.4.0rc2

OS 10.14.6,  Mac Mini

Mode Q65,    Waterfall Q65_ Sync selected and slow to let go of 
PTT line to K3S radio (even after Tx period).   (when I go into 
Radio Panel, the Test PTT Red bar stays on, won't easily release).


Then when a decode should take place, I get a crash exactly as 
Kevin reported with the same exact message as reported below.


Thank you,   73,

Dave KJ9I



On 3/5/21, 8:47 PM, "Kevin McQuiggin">  wrote:


Hi All:
I tried submitting this earlier today, but it didn’t seem to 
make to the list.  Hence, a re-submission:


Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.

Selection of “Q65_Sync” from dropdown box on the wide graph 
causes a crash as soon as the application starts to TX.  Selection 
of “Cumulative” (the default) and TX/RX are normal.


Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.

I have saved the crash dump and can provide as necessary.

73,

Kevin VE7ZD



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Hi Bill,

I just tried to use Q65 with “Cumulative" selected as you suggested.  However, 
the problem is still there as described below.  I have to shut down my 
transceiver (Elecraft K3S) to get it to stop transmitting.

Thanks,

John
WA1EAZ

> On Mar 6, 2021, at 8:44 AM, Bill Somerville  wrote:
> 
> Hi John,
> 
> I am not sure as I have not investigated this issue yet. It is easy enough to 
> check, select "Cumulative" for the 2D spectrum display, restart WSJT-X, and 
> see if the iusse goes away.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 13:25, John Stengrevics wrote:
>> Hi Bill,
>> 
>> Will this fix solve the problem I reported yesterday with OS Big Sur?  I’ll 
>> repost below in case you didn’t see it.
>> 
>> Thanks,
>> 
>> John
>> WA1EAZ
>> 
>> Repost - some additions in red:  
>> 
>> John & Joe,
>> 
>> I had been using the previous version successfully on a MacBook Pro (Intel 
>> not M1) OS Big Sur 11.2.2.
>> 
>> Today, I downloaded Mac version 2.4.0-rc2.  
>> 
>> When running Q65, T/R = 30 seconds, Submode A, the program continues to 
>> transmit after the 30 second period is complete for 60 seconds total.  
>> However, it does not seem to drive my amplifier after 30 seconds. [PTT is 
>> activated for the second 30 seconds, but no audio to drive the amp.]  I have 
>> since tried FT8 on WSJT-X and can confirm that it works as usual.  Thus, the 
>> problem seems to be isolated to Q65.
>> 
>> I did follow the instructions in the Readme file.  
>> 
>> If there is a file I can send you, please let me know.
>> 
>> I would appreciate any suggestions you can provide.
>> 
>> Best 73,
>> 
>> John
>> WA1EAZ
>> 
>>> On Mar 6, 2021, at 5:55 AM, Bill Somerville >> > wrote:
>>> 
>>> Hi Dave and Kevin,
>>> 
>>> we have finally tracked down the cause of this crash, thanks for your 
>>> patience it was not so easy to track down. It is repaired for the next 
>>> release, for now if you do not use of the Q65_Sync Wide Graph 
>>> synchronization plot the crash will be avoided. Note this is not a Mac 
>>> specific issue although it does seem to have the most severe effects on 
>>> that platform.
>>> 
>>> 73
>>> Bill
>>> G4WJS.
>>> 
>>> On 06/03/2021 03:59, David Schmocker wrote:
 Hello all,
 
 A second report that mirrors this one:WSJT-X 2.4.0rc2
 
 OS 10.14.6,  Mac Mini
 
 Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT line 
 to K3S radio (even after Tx period).   (when I go into Radio Panel, the 
 Test PTT Red bar stays on, won't easily release).
 
 Then when a decode should take place, I get a crash exactly as Kevin 
 reported with the same exact message as reported below.
 
 Thank you,   73,
 
 Dave KJ9I
 
 
 
 On 3/5/21, 8:47 PM, "Kevin McQuiggin">>> >  wrote:
 
 Hi All:
 I tried submitting this earlier today, but it didn’t seem to make to 
 the list.  Hence, a re-submission:
 
 Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.
 
 Selection of “Q65_Sync” from dropdown box on the wide graph causes a 
 crash as soon as the application starts to TX.  Selection of “Cumulative” 
 (the default) and TX/RX are normal.
 
 Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.
 
 I have saved the crash dump and can provide as necessary.
 
 73,
 
 Kevin VE7ZD
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[Bill Somerville]

Hi John,

I am not sure as I have not investigated this issue yet. It is easy 
enough to check, select "Cumulative" for the 2D spectrum display, 
restart WSJT-X, and see if the iusse goes away.


73
Bill
G4WJS.

On 06/03/2021 13:25, John Stengrevics wrote:

Hi Bill,

Will this fix solve the problem I reported yesterday with OS Big Sur? 
 I’ll repost below in case you didn’t see it.


Thanks,

John
WA1EAZ

Repost - some additions in red:

John & Joe,

I had been using the previous version successfully on a MacBook Pro 
(Intel not M1) OS Big Sur 11.2.2.


Today, I downloaded Mac version 2.4.0-rc2.

When running Q65, T/R = 30 seconds, Submode A, the program continues 
to transmit after the 30 second period is complete for 60 seconds 
total.  However, it does not seem to drive my amplifier after 30 
seconds.[PTT is activated for the second 30 seconds, but no audio to 
drive the amp.]  I have since tried FT8 on WSJT-X and can confirm that 
it works as usual.  Thus, the problem seems to be isolated to Q65.


I did follow the instructions in the Readme file.

If there is a file I can send you, please let me know.

I would appreciate any suggestions you can provide.

Best 73,

John
WA1EAZ

On Mar 6, 2021, at 5:55 AM, Bill Somerville > wrote:


Hi Dave and Kevin,

we have finally tracked down the cause of this crash, thanks for your 
patience it was not so easy to track down. It is repaired for the 
next release, for now if you do not use of the Q65_Sync Wide Graph 
synchronization plot the crash will be avoided. Note this is not a 
Mac specific issue although it does seem to have the most severe 
effects on that platform.


73
Bill
G4WJS.

On 06/03/2021 03:59, David Schmocker wrote:

Hello all,

A second report that mirrors this one:    WSJT-X 2.4.0rc2

OS 10.14.6,  Mac Mini

Mode Q65,    Waterfall Q65_ Sync selected and slow to let go of PTT 
line to K3S radio (even after Tx period).   (when I go into Radio 
Panel, the Test PTT Red bar stays on, won't easily release).


Then when a decode should take place, I get a crash exactly as Kevin 
reported with the same exact message as reported below.


Thank you,   73,

Dave KJ9I



On 3/5/21, 8:47 PM, "Kevin McQuiggin">  wrote:


Hi All:
I tried submitting this earlier today, but it didn’t seem to 
make to the list.  Hence, a re-submission:


Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.

Selection of “Q65_Sync” from dropdown box on the wide graph 
causes a crash as soon as the application starts to TX.  Selection 
of “Cumulative” (the default) and TX/RX are normal.


Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.

I have saved the crash dump and can provide as necessary.

73,

Kevin VE7ZD



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[John Stengrevics]

Hi Bill,

Will this fix solve the problem I reported yesterday with OS Big Sur?  I’ll 
repost below in case you didn’t see it.

Thanks,

John
WA1EAZ

Repost - some additions in red:  

John & Joe,

I had been using the previous version successfully on a MacBook Pro (Intel not 
M1) OS Big Sur 11.2.2.

Today, I downloaded Mac version 2.4.0-rc2.  

When running Q65, T/R = 30 seconds, Submode A, the program continues to 
transmit after the 30 second period is complete for 60 seconds total.  However, 
it does not seem to drive my amplifier after 30 seconds. [PTT is activated for 
the second 30 seconds, but no audio to drive the amp.]  I have since tried FT8 
on WSJT-X and can confirm that it works as usual.  Thus, the problem seems to 
be isolated to Q65.

I did follow the instructions in the Readme file.  

If there is a file I can send you, please let me know.

I would appreciate any suggestions you can provide.

Best 73,

John
WA1EAZ

> On Mar 6, 2021, at 5:55 AM, Bill Somerville  wrote:
> 
> Hi Dave and Kevin,
> 
> we have finally tracked down the cause of this crash, thanks for your 
> patience it was not so easy to track down. It is repaired for the next 
> release, for now if you do not use of the Q65_Sync Wide Graph synchronization 
> plot the crash will be avoided. Note this is not a Mac specific issue 
> although it does seem to have the most severe effects on that platform.
> 
> 73
> Bill
> G4WJS.
> 
> On 06/03/2021 03:59, David Schmocker wrote:
>> Hello all,
>> 
>> A second report that mirrors this one:WSJT-X 2.4.0rc2
>> 
>> OS 10.14.6,  Mac Mini
>> 
>> Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT line to 
>> K3S radio (even after Tx period).   (when I go into Radio Panel, the Test 
>> PTT Red bar stays on, won't easily release).
>> 
>> Then when a decode should take place, I get a crash exactly as Kevin 
>> reported with the same exact message as reported below.
>> 
>> Thank you,   73,
>> 
>> Dave KJ9I
>> 
>> 
>> 
>> On 3/5/21, 8:47 PM, "Kevin McQuiggin"  wrote:
>> 
>> Hi All:
>> I tried submitting this earlier today, but it didn’t seem to make to the 
>> list.  Hence, a re-submission:
>> 
>> Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.
>> 
>> Selection of “Q65_Sync” from dropdown box on the wide graph causes a 
>> crash as soon as the application starts to TX.  Selection of “Cumulative” 
>> (the default) and TX/RX are normal.
>> 
>> Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.
>> 
>> I have saved the crash dump and can provide as necessary.
>> 
>> 73,
>> 
>> Kevin VE7ZD
> 
> 
> 
> 
> 
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Neil Zampella]

Hi Claude,

WSJT-X can log the QSO, but as far as getting credit for it, trying to
upload to LoTW, eQSL, and the like will be problematic.   Remember when
FT4 first came out, people were loading to some online
logbooks/confirmation sites as MODE: FT4, then the ADIF committee came
out with the definition of MODE: MFSK, SUBMODE:  FT4, and a lot of
operators had to correct their uploads, local logs, etc.

Many local log programs have methods of making a local change to the
list of modes/submodes, so you can log to those and then change those
log entries 'en mass' to whatever the ADIF committee decides.   
However, if you load to an online service, that's harder to correct.

That's what I meant about how to log the Q65 QSOs.

Neil, KN3ILZ

On 3/6/2021 2:03 AM, Claude Frantz wrote:

On 3/6/21 2:07 AM, Neil Zampella wrote:

Hi Neil, Reino and all,


I wouldn't go there yet.   The ADIF committee has not yet met to add
this mode to the ADIF standard.


Is WSJT-X unable to log Q65 QSO's ?

Best wishes,
Claude (DJ0OT)





___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] CAT+YAESU_FTDX3000, WSJTX2.3.0 ....a.so

[Bill Somerville]

Hi Dirk,

so I can see what is happening please put the attached file into your 
WSJT-X configuration files directory (on MS Windows that is the same as 
the log files directory - "Menu->File->Open log directory"), then 
restart WSJT-X and run a minimal test that demonstrates one of the 
issues, then quit WSJT-X. There will be a new file on your Desktop 
called WSJT-X_RigControl.log, send that to me for analysis please (g4wjs 
 classdesign  com).


Once you have sent the log file you should delete the 
wsjtx_log_config.ini and WSJT-X_RigControl.log files to revert to normal 
operation.


73
Bill
G4WJS.

On 06/03/2021 11:37, Dirk Kuschke via wsjt-devel wrote:

Bill,

sorry, but the update do not fix the problem., it makes it worse.

Error 1) the same mistake as before with the switch to split.

Error 2 VFO A LED flashed and no signal receive after band change.
after pushing the VFO A knop at trx, the trx work well until next band 
change.

Then the error occurs again

Regards
73 Dirk
DD5KD
Am Mittwoch, 17. Februar 2021, 16:29:20 MEZ hat Bill Somerville 
 Folgendes geschrieben:



On 17/02/2021 15:03, Dirk Kuschke via wsjt-devel wrote:


Hello,

since FTDX version 2.3.0

my yaesu ftdx3000d changes to split mode when I change the frequency,

using the button on the left. Up to version WSJTX2.2.2 this was not 
the case.


The settings are:
Inline-Bild Inline-Bild

I change the Databits between 7 or 8 and the Stop bits between 1 or 2 
with


no effect. The correct setting Databit 8 and 2 Stop bits lt. Yaesu UK.

In the settings i also change the radio to Yaesu FT-950 with the same

affect change to split mode….

73, Dirk


Hi Dirk,

if this is happening when you change bands then it is because SPLIT 
was set the last time  that band was used on the rig. If you disable 
SPLIT it should be fine the next time you change to that band. The 
same applies for other bands. The change in behaviour is that WSJT-X, 
via Hamlib, is changing bands on your rig as if you have clicked the 
target band button before changing to the target frequency in that 
band. The reason for the change is that other settings are also 
recalled per band like the aerial socket, pre-amp settings, etc..


73
Bill
G4WJS.



[Sinks.SYSLOG]
Destination=TextFile
Asynchronous=true
AutoFlush=false
FileName="${AppLocalDataLocation}/wsjtx_syslog.log"
TargetFileName="${AppLocalDataLocation}/logs/wsjtx_syslog_%Y-%m.log"
RotationTimePoint="01 00:00:00"
Append=true
EnableFinalRotation=false
MaxSize=41943040
MinFreeSpace=1073741824
MaxFiles=12
Target="${AppLocalDataLocation}/logs"
ScanForFiles="Matching"
Format="[%Channel%][%TimeStamp(format=\"%Y-%m-%d 
%H:%M:%S.%f\")%][%Uptime(format=\"%O:%M:%S.%f\")%][%Severity%] %Message%"
Filter="%Severity% >= info"

[Sinks.RIGCTRL]
Destination=TextFile
Asynchronous=true
AutoFlush=true
FileName="${DesktopLocation}/WSJT-X_RigControl.log"
Append=true
Format="[%TimeStamp(format=\"%Y-%m-%d 
%H:%M:%S.%f\")%][%Uptime(format=\"%O:%M:%S.%f\")%][%Channel%:%Severity%] 
%Message%"
Filter="%Channel% matches \"RIGCTRL\" | %Severity% >= info"
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] CAT+YAESU_FTDX3000, WSJTX2.3.0 ....a.so

[Dirk Kuschke via wsjt-devel]

 Bill,
sorry, but the update do not fix the problem., it makes it worse.
Error 1) the same mistake as before with the switch to split.
Error 2 VFO A LED flashed and no signal receive after band change.after pushing 
the VFO A knop at trx, the trx work well until next band change.Then the error 
occurs again 
Regards73 DirkDD5KDAm Mittwoch, 17. Februar 2021, 16:29:20 MEZ hat Bill 
Somerville  Folgendes geschrieben:  
 
  On 17/02/2021 15:03, Dirk Kuschke via wsjt-devel wrote:
  
  
Hello,
 
since FTDX version 2.3.0
 
my yaesu ftdx3000d changes to split mode when I change the frequency, 
 
using the button on the left. Up to version WSJTX2.2.2 this was not the case.
 The settings are:    
 
  
 
 
I change the Databits between 7 or 8 and the Stop bits between 1 or 2 with 
 
no effect. The correct setting Databit 8 and 2 Stop bits lt. Yaesu UK.
 
In the settings i also change the radio to Yaesu FT-950 with the same
 
affect change to split mode….
 
 
 
73, Dirk
  
 
Hi Dirk,
 
if this is happening when you change bands then it is because SPLIT was set the 
last time  that band was used on the rig. If you disable SPLIT it should be 
fine the next time you change to that band. The same applies for other bands. 
The change in behaviour is that WSJT-X, via Hamlib, is changing bands on your 
rig as if you have clicked the target band button before changing to the target 
frequency in that band. The reason for the change is that other settings are 
also recalled per band like the aerial socket, pre-amp settings, etc..
 
73
 Bill
 G4WJS.
 
 ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  ___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Reino Talarmo]

I made a dummy call:
HT7AAA  Q65 -22 -30
20210305 etc.

So currently just mode set to Q65 and no submode at all.

73, Reino OH3mA

>OK, but when WSJT-X is logging an ADIF record, which MODE and SUBMODE is
inserted in this record, at the present time ?



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Highlight Callsign in NetworkMessage - Feature request

[Bill Somerville]

On 06/03/2021 09:36, runninge...@gmail.com wrote:

Hi,

I find it very difficult to sync the list of highlighted callsigns between
server and WSJTX clients.
More specifically, when my udp server restarts, all previously highlighted
callsigns become zombies without being able to clear them.

Unless I have something seriously misunderstood, would it be possible to
provide a means to clear all highlighted callsigns in Network Message 13
(Highlight Callsign) ?
Maybe an empty callsign could clear the highlighted list ?

73's Erik
ON4PB


Hi Erik,

there are two ways to highlight callsigns, you can set the "Highlight 
last" field to true to highlight a callsign in the batch of decodes from 
the last Rx period, or you can set the "Highlight last" field to false 
which highlights *all* instances of the specified calllsign in the Band 
Activity window list. As is stated in the documentation 
(https://sourceforge.net/p/wsjt/wsjtx/ci/master/tree/Network/NetworkMessage.hpp#l444) 
using this message with "Highlight last" set to false should be reserved 
for a few special cases, we recommend that the normal case should only 
send messages with "Highlight last" set to true.


The consequence of the "Highlight last" flag is to shift responsibility 
between server and client as to which should maintain a list of 
currently Highlighted callsigns. When "Highlight last" is sent as true 
the server need not keep a record of highlighted callsigns, but must 
review every decode to decide if highlighting is required, conversely if 
"Highlight last" is set to false the server should keep its own list of 
highlighted callsigns so that they can be reset when required.


73
Bill
G4WJS.



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] RC2 Report on MacOS 10.14.6 Mojave - Q65_Sync

[Bill Somerville]

Hi Dave and Kevin,

we have finally tracked down the cause of this crash, thanks for your 
patience it was not so easy to track down. It is repaired for the next 
release, for now if you do not use of the Q65_Sync Wide Graph 
synchronization plot the crash will be avoided. Note this is not a Mac 
specific issue although it does seem to have the most severe effects on 
that platform.


73
Bill
G4WJS.

On 06/03/2021 03:59, David Schmocker wrote:

Hello all,

A second report that mirrors this one:WSJT-X 2.4.0rc2

OS 10.14.6,  Mac Mini

Mode Q65,Waterfall Q65_ Sync selected and slow to let go of PTT line to K3S 
radio (even after Tx period).   (when I go into Radio Panel, the Test PTT Red 
bar stays on, won't easily release).

Then when a decode should take place, I get a crash exactly as Kevin reported 
with the same exact message as reported below.

Thank you,   73,

Dave KJ9I



On 3/5/21, 8:47 PM, "Kevin McQuiggin"  wrote:

 Hi All:
 I tried submitting this earlier today, but it didn’t seem to make to the 
list.  Hence, a re-submission:

 Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave.

 Selection of “Q65_Sync” from dropdown box on the wide graph causes a crash 
as soon as the application starts to TX.  Selection of “Cumulative” (the 
default) and TX/RX are normal.

 Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”.

 I have saved the crash dump and can provide as necessary.

 73,

 Kevin VE7ZD






___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Claude Frantz]

On 3/6/21 10:59 AM, Reino Talarmo wrote:

Hi Reino and all,


Simply said WSJT-X logs Q65 QSOs, but in future it would change logging format.


OK, but when WSJT-X is logging an ADIF record, which MODE and SUBMODE is 
inserted in this record, at the present time ?


Best wishes,
Claude (DJ0OT)


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Reino Talarmo]

Hi Claude,

The issue is that there is a common target to have all multiFSK, multiMSG, 
multiGSK etc. modes under a single MFSK mode as submodes. Currently this is 
under "standardization" in adif group and WSJT-X applies in RC just mode and 
puts there Q65 as it did at introduction of FT4. 

Simply said WSJT-X logs Q65 QSOs, but in future it would change logging format.
73, Reino OH3mA

-Original Message-
From: Claude Frantz [mailto:claude.fra...@bayern-mail.de] 
Sent: 6. maaliskuuta 2021 10:03
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

On 3/6/21 2:07 AM, Neil Zampella wrote:

Hi Neil, Reino and all,

> I wouldn't go there yet.   The ADIF committee has not yet met to add 
> this mode to the ADIF standard.

Is WSJT-X unable to log Q65 QSO's ?

Best wishes,
Claude (DJ0OT)


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Highlight Callsign in NetworkMessage - Feature request

[runningerik]

Hi,

I find it very difficult to sync the list of highlighted callsigns between
server and WSJTX clients.
More specifically, when my udp server restarts, all previously highlighted
callsigns become zombies without being able to clear them.

Unless I have something seriously misunderstood, would it be possible to
provide a means to clear all highlighted callsigns in Network Message 13
(Highlight Callsign) ?
Maybe an empty callsign could clear the highlighted list ?

73's Erik
ON4PB




___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Claude Frantz]

On 3/5/21 2:54 PM, Joe Taylor wrote:

We are pleased to announce release candidate WSJT-X 2.4.0-rc2, which 
includes the new digital mode Q65.


Hi Bill and all,

I cannot find the file
./doc/user_guide/en/images/Q65_6m_ionoscatter.png
in the source code from the repo. It's needed to build the doc.

Best wishes,
Claude (DJ0OT)


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release candidate: WSJT-X 2.4.0-rc2

[Claude Frantz]

On 3/6/21 2:07 AM, Neil Zampella wrote:

Hi Neil, Reino and all,


I wouldn't go there yet.   The ADIF committee has not yet met to add
this mode to the ADIF standard.


Is WSJT-X unable to log Q65 QSO's ?

Best wishes,
Claude (DJ0OT)


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel