Re: [wsjt-devel] IC-705 little to no decodes

Could there be some audio enhancements that should be switched off, either windows or in rig such as noise blanker or some automatic interference reduction? Does your computer have two time services activated, perhaps not in the both computers? On those few decodes, what are the dT values?

Re: [wsjt-devel] IC-705 little to no decodes

Is the IC-705 in Lower Side band  mode or A data mode that is inverted? On 12/4/2023 12:57 PM, robert evans LAST_NAME via wsjt-devel wrote: Using a IC-705 over the weekend and after installing the usb drivers in a asus win11 i9 laptop i started WSJT-X 2.7.0-rc2. The rig control worked fine

Re: [wsjt-devel] IC-705 little to no decodes

you have the Wide Graph opened out? you will only decode what you see on the wide graph yes? Alan On Tue, 5 Dec 2023 at 05:57, robert evans LAST_NAME via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Using a IC-705 over the weekend and after > installing the usb drivers in a asus win11

Re: [wsjt-devel] IC-705 little to no decodes

And your clock is dead nuts ? Ron WV4P On Mon, Dec 4, 2023 at 4:00 PM robert evans LAST_NAME via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Using a IC-705 over the weekend and after > installing the usb drivers in a asus win11 > i9 laptop i started WSJT-X 2.7.0-rc2. > > The rig

Re: [wsjt-devel] IC-705 little to no decodes

Check your time http://time.is Mike W9MDB On Monday, December 4, 2023 at 03:57:05 PM CST, robert evans LAST_NAME via wsjt-devel wrote: Using a IC-705 over the weekend and after installing the usb drivers in a asus win11 i9 laptop i started WSJT-X 2.7.0-rc2.   The rig

[wsjt-devel] IC-705 little to no decodes

Using a IC-705 over the weekend and after installing the usb drivers in a asus win11 i9 laptop i started WSJT-X 2.7.0-rc2. The rig control worked fine and the signals where being displayed in the spect graph, but no decodes. Double checked the time set. Still no decodes. Walked away for many

Re: [wsjt-devel] Source code location for hashcodes.f90?

Thanks Reino, that was it. I've uploaded my version to github: https://github.com/dkozinn/hashcodes I am by no means a Python expert and there may be better ways to do this, but the results from this appear to match the .f90 version output for any callsigns that I put in. One small

Re: [wsjt-devel] Source code location for hashcodes.f90?

Hi David, Was it at www.arrl.org/qexfiles year 2020 July/August, The FT4 and FT8 Communication Protocols http://www.arrl.org/files/file/QEX%20Binaries/2020/ft4_f t8_protocols.tgz 73, Reino OH3mA PS. I like to see that Python utility. Reino