you have the Wide Graph opened out? you will only decode what you see on the wide graph yes? Alan
On Tue, 5 Dec 2023 at 05:57, robert evans LAST_NAME via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Using a IC-705 over the weekend and after > installing the usb drivers in a asus win11 > i9 laptop i started WSJT-X 2.7.0-rc2. > > The rig control worked fine and the signals > where being displayed in the spect graph, > but no decodes. Double checked the time set. > Still no decodes. > > Walked away for many minutes and there were > decodes when i got back, but only a few. > Installed WSJT-X 2.6.1 and tried again. > Same behavior. > > Every once in a awhile it would decode a > frame and then none for long periods of > time even though the spectrum graph showed > signals on the waterfall continuously. > > Switched to an old dell i3 win10 laptop > and saw the same behavior with wsjt-x. > Tried fldigi and it decoded Olivia and > psk31 as well as cw no problem. > > Tried JS8 as well - no problem. > > Back to WSJT-X and double checked the > settings. Every once in a long while > it might decode what looks like a frame. > > N2LO~> > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- regards Alan McDonald
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
