Re: [wsjt-devel] Possible bug in V2 GA ?

[Chris Getman]

Well it happened again but this time I paid better attention.
So I figured I should tell you.

I did double click on a station calling CQ
My station called his call sign with my call and grid as normal.
He called CQ a second time and I responded again automatically.
The third time he responded to another station.
But my station kept transmitting right on top of that other station.
Enable TX was not lit.
It was exactly the same frequency.
It would continue until I re-enabled the enable TX button
And then pressed the Halt TX.

Sorry but this doesn’t follow any of the theories presented.
And I hope it is a bug because I really don’t like transmitting on top of
someone else’s Signal.
When they are the one being called.

So I hope this is something minor, and can be easily fixed.
Or tell me how to avoid it.

But keep up the great work, this software is awesome.

Chris. -  N3PLM



On Mon, Dec 31, 2018 at 5:26 PM Hasan al-Basri 
wrote:

> If you didn't double click to get on his frq, you really weren't on his
> freq. Single click moves rx, double click moves both.
>
> What I think happened was you single clicked (and stayed on your prior tx
> freq), so, when he answered someone else, you continued to call him (but
> off his rx freq), which is "good". He might see you for the next qso, hence
> my queue comment.
> Hasan
>
>
> On Mon, Dec 31, 2018 at 4:11 PM Chris Getman 
> wrote:
>
>> Thanks for the information.
>>
>> I thought I was exactly on his frequency,
>> I had just clicked on him calling CQ,
>> And sent his call then mine.
>> But he responded to someone else.
>>
>> So if this is to allow others to queue up,
>> then what am I transmitting?
>> And why would I want stations to queue up on his frequency?
>>
>> Sorry for rambling on, but I am just confused on this one
>> Is this somewhere I can read up on, to better understand?
>>
>> Thanks
>> Chris. -  N3PLM
>>
>> On Mon, Dec 31, 2018 at 4:41 PM Hasan al-Basri 
>> wrote:
>>
>>> Chris,
>>> If you are not calling right on or close to the station's frequency, the
>>> tx will not go out, it will continue. This is a feature, not a bug. It
>>> allows the "rare" station to queue up some callers while continuing to work
>>> an existing station that may or may not be on his tx freq.
>>> 73, N0AN
>>> Hasan
>>>
>>>
>>> On Mon, Dec 31, 2018 at 11:09 AM Chris Getman 
>>> wrote:
>>>
>>>> When responding to someone calling CQ.
>>>>
>>>> But the calling station reply’s to someone else,
>>>>
>>>> The enable TX button goes out, and the transmit is supposed to stop
>>>>
>>>> But once in a while,  the transmitter keep transmitting each cycle,
>>>>
>>>> Nothing shows up on the right hand screen .
>>>>
>>>>
>>>>
>>>> The only way to stop the repeating transmit, you have to manually
>>>> re-enable the Enable TX button
>>>>
>>>> and the hit the Halt TX button.
>>>>
>>>> Hitting the Halt TX button alone does nothing.
>>>>
>>>>
>>>>
>>>> Windows 10 – Dell 6400 – Signalink SL1+ - FT-847
>>>>
>>>>
>>>>
>>>> Doesn’t happen often and it isn’t a big problem
>>>>
>>>> Once you know what it is.
>>>>
>>>> Just Wondering if anyone else encountered this issue.
>>>>
>>>>
>>>>
>>>> Chris – N3PLM
>>>>
>>>>
>>>> ___
>>>> wsjt-devel mailing list
>>>> wsjt-devel@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>>
>>> ___
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> --
>>
>> Chris Getman
>>
>> 413 Militia Drive
>>
>> Lansdale, PA  19446
>>
>> 215-368-1005 – Home
>>
>> 215-353-6429 – Cell
>>
>> chris.getman...@gmail.com
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
-- 

Chris Getman

413 Militia Drive

Lansdale, PA  19446

215-368-1005 – Home

215-353-6429 – Cell

chris.getman...@gmail.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Possible bug in V2 GA ?

[Chris Getman]

Thanks that helped.

Chris

On Mon, Dec 31, 2018 at 5:26 PM Hasan al-Basri 
wrote:

> If you didn't double click to get on his frq, you really weren't on his
> freq. Single click moves rx, double click moves both.
>
> What I think happened was you single clicked (and stayed on your prior tx
> freq), so, when he answered someone else, you continued to call him (but
> off his rx freq), which is "good". He might see you for the next qso, hence
> my queue comment.
> Hasan
>
>
> On Mon, Dec 31, 2018 at 4:11 PM Chris Getman 
> wrote:
>
>> Thanks for the information.
>>
>> I thought I was exactly on his frequency,
>> I had just clicked on him calling CQ,
>> And sent his call then mine.
>> But he responded to someone else.
>>
>> So if this is to allow others to queue up,
>> then what am I transmitting?
>> And why would I want stations to queue up on his frequency?
>>
>> Sorry for rambling on, but I am just confused on this one
>> Is this somewhere I can read up on, to better understand?
>>
>> Thanks
>> Chris. -  N3PLM
>>
>> On Mon, Dec 31, 2018 at 4:41 PM Hasan al-Basri 
>> wrote:
>>
>>> Chris,
>>> If you are not calling right on or close to the station's frequency, the
>>> tx will not go out, it will continue. This is a feature, not a bug. It
>>> allows the "rare" station to queue up some callers while continuing to work
>>> an existing station that may or may not be on his tx freq.
>>> 73, N0AN
>>> Hasan
>>>
>>>
>>> On Mon, Dec 31, 2018 at 11:09 AM Chris Getman 
>>> wrote:
>>>
>>>> When responding to someone calling CQ.
>>>>
>>>> But the calling station reply’s to someone else,
>>>>
>>>> The enable TX button goes out, and the transmit is supposed to stop
>>>>
>>>> But once in a while,  the transmitter keep transmitting each cycle,
>>>>
>>>> Nothing shows up on the right hand screen .
>>>>
>>>>
>>>>
>>>> The only way to stop the repeating transmit, you have to manually
>>>> re-enable the Enable TX button
>>>>
>>>> and the hit the Halt TX button.
>>>>
>>>> Hitting the Halt TX button alone does nothing.
>>>>
>>>>
>>>>
>>>> Windows 10 – Dell 6400 – Signalink SL1+ - FT-847
>>>>
>>>>
>>>>
>>>> Doesn’t happen often and it isn’t a big problem
>>>>
>>>> Once you know what it is.
>>>>
>>>> Just Wondering if anyone else encountered this issue.
>>>>
>>>>
>>>>
>>>> Chris – N3PLM
>>>>
>>>>
>>>> ___
>>>> wsjt-devel mailing list
>>>> wsjt-devel@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>>
>>> ___
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>> --
>>
>> Chris Getman
>>
>> 413 Militia Drive
>>
>> Lansdale, PA  19446
>>
>> 215-368-1005 – Home
>>
>> 215-353-6429 – Cell
>>
>> chris.getman...@gmail.com
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
-- 

Chris Getman

413 Militia Drive

Lansdale, PA  19446

215-368-1005 – Home

215-353-6429 – Cell

chris.getman...@gmail.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Possible bug in V2 GA ?

[Chris Getman]

When responding to someone calling CQ.

But the calling station reply's to someone else,

The enable TX button goes out, and the transmit is supposed to stop

But once in a while,  the transmitter keep transmitting each cycle,

Nothing shows up on the right hand screen .

 

The only way to stop the repeating transmit, you have to manually re-enable
the Enable TX button 

and the hit the Halt TX button.

Hitting the Halt TX button alone does nothing.

 

Windows 10 - Dell 6400 - Signalink SL1+ - FT-847

 

Doesn't happen often and it isn't a big problem

Once you know what it is.

Just Wondering if anyone else encountered this issue.

 

Chris - N3PLM

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] UDP to HRD Logbook

[Chris Getman]

I am trying to set up auto logging to Ham Radio Deluxe Logbook

 

I have set the ADIF broadcast in WSJT settings under N1MM Loggger +
Broadcasts

For 127.0.0.1  port 2333

And I have set the receive under HRD Logbook.

 

Everything works fine if Malwarebytes is turned off, but won't work when it
is on.

 

I have added all the exclusions that Malwarebytes suggested,

 

Except they said to be sure to exclude the .exe program that actually sends
the ADIF broadcast

 

I thought it was send be WSJTx.exe

 

Is this the correct exe for sending the ADIF file ?

Or is it some other program ?

 

 

Or are there any other suggestions ?

 

 

Chris  -  N3PLM

chris.getman...@gmail.com

 

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Yaesu FT-847

[Chris Getman]

I use an FT-847 with WSJT, but pass control via Ham Radio Deluxe and
everything works fine. Give it a try it may solve your problem. -Chris



On Tue, Oct 9, 2018 at 7:18 AM  wrote:

> While you can operate perfectly “fine” without CAT control for many
> digital modes (including plain vanilla FT8), you need to be mindful of the
> placement of your transmitted signal to ensure you aren’t bumping against
> the edges of your transmit filters, i.e. the high and low ends of the
> waterfall. Hitting the TX filter edges can cause issues with power rolling
> off and (more importantly) it can cause issues with signal distortion or
> IMD.  Remember that on many bands there are quite a few signals packed into
> a small space and one person with a “rough” signal can ruin a whole lot of
> other Op’s QSO’s.
>
>
>
> CAT control simply makes this whole process easier.
>
>
>
> It’s also highly recommended when using DXPedition Mode as a “hound” (same
> reason as above).
>
>
>
> Jim S.
>
> N2ADV
>
>
>
>
>
>
>
> *From:* Alan VK2ZIW 
> *Sent:* Monday, October 8, 2018 9:42 PM
> *To:* WSJT software development 
> *Subject:* Re: [wsjt-devel] Yaesu FT-847
>
>
>
> *Hi all,*
>
>
>
> *Why do you need CAT control at all?*
>
>
>
> *What's really needed is a rig with Stability.*
>
>
>
> *Any rig with a digital VFO will do.*
>
>
>
> *My 2c.*
>
>
>
> *Yes, I have an FT-840 and it's OK.*
>
>
>
> *Alan VK2ZIW*
>
>
>
>
>
> *On Mon, 8 Oct 2018 10:54:42 -0400, Karl Heinz Kremer wrote*
> > FT-840UNI would be OK. “Early” or “NoGet” would require the user to know
> more about what’s going on with these devices.
>
> >
> >
> Karl Heinz - K5KHK
> >
>
>
> >
>
>
> > On Oct 8, 2018, at 10:52 AM, Black Michael  wrote:
>
> >
> > What can we call these earlier rigs to make the apparent in the riglist?
> >
>
> > FT-840EARLY  ???
> > Or
> > FT-840UNI (unidirectional)
> > FT-840NOGET
>
> >
>
> > Or any better idea?
> >
>
> > de Mike W9MDB
>
> >
>
> >
> >
>
> >
>
> >
>
> >
> > On Monday, October 8, 2018, 9:47:05 AM CDT, Karl Heinz Kremer <
> k...@khk.net> wrote:
> >
>
> >
>
> >
> > This also seems to be the case with my early Yaesu FT-840 - it can
> receive CAT commands, but does not report anything back.
>
> >
> >
>
> > Karl Heinz - K5KHK
> >
>
>
>
> >
> > On Mon, Oct 8, 2018 at 10:44 AM Black Michael via wsjt-devel <
> wsjt-devel@lists.sourceforge.net> wrote:
>
>
> >
> > What version of WSJT-X are you using right now?
> >
>
> > Looks like we need a new rig entry for the earlier serial #'s and I can
> build you one for testing.
> >
>
> > de Mike W9MDB
>
> >
>
> >
> >
>
> >
>
> >
>
> >
> > On Monday, October 8, 2018, 9:34:22 AM CDT, Shane Stroud <
> shanestroud1...@hotmail.com> wrote:
> >
>
> >
>
> >
> > I have discovered that the early serial numbered models of the Yaesu
> FT-847 had unidirectional CAT.  Basically, the software can send
> frequencies and modes to the rig, but the rig cannot respond.  This applies
> to serial numbers through about 8G. Mine is an 8E series.
> >
>
> > In any version of WSJT, under any operating system, the rig will set
> frequency and mode, then error out because it cannot respond to polling.
> >
>
> > I'm not sure if this needs fixed in WSJT or in hamlib, but other hamlib
> programs seem to work with the rig without issue.
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
>
>
> Alan
>
> Evil flourishes when good men do nothing.
> Consider the Christmas child.
> ---
>
> Alan Beard   Unix Support Technician from 1984 to today
> 70 Wedmore Rd.   Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS
> Emu Heights N.S.W. 2750  Routers, terminal servers, printers, terminals
> etc..
> +61 2 47353013 (h)   Support Programming, shell scripting, "C",
> assembler
> 0414 353013 (mobile) After uni, electronics tech
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
-- 

Chris Getman

413 Militia Drive

Lansdale, PA  19446

215-368-1005 – Home

215-353-6429 – Cell

chris.getman...@gmail.com
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] no decode

[Chris Getman]

I had a very similar problem.

 

The time looked OK, but when I did a manual Time Sync everything started working

 

Michael had me switch time sync programs to Meinberg and I haven’t had an issue 
since.

 

It’s worth a try and might fix your issue also.

 

Chris  -  N3PLM

 

From: Black Michael via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] 
Sent: Tuesday, August 7, 2018 9:38 AM
To: wsjt-devel@lists.sourceforge.net
Cc: Black Michael 
Subject: Re: [wsjt-devel] no decode

 

Hmmm hamspots.net doesn't show any transmissions from you for the last 16 hours 
so you may not be transmitting as you think.

 

You say your time is good but what does http://time.is tell you?

 

de Mike W9MDB

 

 

 

 

On Tuesday, August 7, 2018, 8:21:08 AM CDT, seaka...@juno.com 
  mailto:seaka...@juno.com> > 
wrote: 

 

 

I've been using this software flawlessly for a while.  I'm using it on a Mac 
machine with Signalink and ICOM 735.  This morning when I turned on the 
computer and ran the program it was not decoding.  The waterfall shows lots of 
very strong signals.  Time is exact between software and computer.  When I look 
at the mac sound settings all is normal.  The software DOES transmit.  Just no 
decoding of signals.   I was using it yesterday before I shut the computer down 
perfectly.  No indication of trouble.  I also deleted the program and re 
installed a new download.  All perimeters stayed the same upon re install.  
Again it does transmit.  Just no decode..

Any ideas???

 

Mike M

AC1DV

 

  
 

 

"All good things are wild and free."

~ Henry David Thoreau   




  How To 
Remove Eye Bags & Lip Lines Fast (Watch)
Fit Mom Daily
  
http://thirdpartyoffers.juno.com/TGL3132/5b699b793d36a1b7944b9st02vuc
   

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! 
http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net  
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] New Release

[Chris Getman]

I’ll check and let you know the next time it happens.

 

Thanks

Chris  -  N3PLM

 

From: Black Michael via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] 
Sent: Sunday, July 1, 2018 12:45 PM
To: WSJT software development 
Cc: Black Michael 
Subject: Re: [wsjt-devel] New Release

 

When that happens check if jt9.exe is still running.

 

De Mike W9MDB

 

Sent from Yahoo Mail on Android 
<https://go.onelink.me/107872968?pid=InProduct=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers_wl=ym_sub1=Internal_sub2=Global_YGrowth_sub3=EmailSignature>
 

 

On Sun, Jul 1, 2018 at 11:22 AM, Chris Getman

mailto:chris.getman...@gmail.com> > wrote:

Hi Gary

 

Just thought I would let you know I have had this happen 3 or 4 times now.

 

Just since 1.9.1 the system just stops decoding even though the stations appear 
on the waterfall.

 

Nothing happening that  I can relate to this, it just happens once in a while.

 

It takes a complete shutdown reboot to correct this. A restart doesn't help.

 

I am Windows 10 release 1803, Signallink SL-1+ to an FT-847

 

Have you heard anything else about this issue ?

What might be causing it or any correction?

 

Thanks

Chris  -  N3PLM

 

-Original Message-

From: Gary McDuffie [mailto:mcduf...@ag0n.net <mailto:mcduf...@ag0n.net> ] 

Sent: Monday, June 4, 2018 12:50 PM

To: WSJT software development mailto:wsjt-devel@lists.sourceforge.net> >

Subject: Re: [wsjt-devel] New Release

 

 

 

> On Jun 4, 2018, at 8:33 AM, Chris Getman  <mailto:chris.getman...@gmail.com> > wrote:

> 

> After about 4 hours FT8 simply just stopped decoding.

> The waterfall display showed stations, but nothing decoded.

 

I had this happen a couple of versions back, but that was the only time.  If 
you aren’t operating but just in monitor mode continuously, does it do the same 
thing?  I monitor 24/7 except when storms are in the area and have not had a 
problem, even since the 1.9.1 version was released.  It’s pretty strange to 
have the waterfall showing signals, but all of a sudden nothing is appearing in 
the decoded windows, but I have see it so I know it does happen.  You are not 
the first to report this recently, but it sounds like it is kind of rare.

 

Gary - AG0N

--

Check out the vibrant tech community on one of the world's most engaging tech 
sites, Slashdot.org! http://sdm.link/slashdot  <http://sdm.link/slashdot%20> 
___

wsjt-devel mailing list

wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> 

https://lists.sourceforge.net/lists/listinfo/wsjt-devel

 

 

--

Check out the vibrant tech community on one of the world's most

engaging tech sites, Slashdot.org! http://sdm.link/slashdot

___

wsjt-devel mailing list

wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> 

https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] New Release

[Chris Getman]

Hi Gary

Just thought I would let you know I have had this happen 3 or 4 times now.

Just since 1.9.1 the system just stops decoding even though the stations appear 
on the waterfall.

Nothing happening that  I can relate to this, it just happens once in a while.

It takes a complete shutdown reboot to correct this. A restart doesn't help.

I am Windows 10 release 1803, Signallink SL-1+ to an FT-847

Have you heard anything else about this issue ?
What might be causing it or any correction?

Thanks
Chris  -  N3PLM

-Original Message-
From: Gary McDuffie [mailto:mcduf...@ag0n.net] 
Sent: Monday, June 4, 2018 12:50 PM
To: WSJT software development 
Subject: Re: [wsjt-devel] New Release



> On Jun 4, 2018, at 8:33 AM, Chris Getman  wrote:
> 
> After about 4 hours FT8 simply just stopped decoding.
> The waterfall display showed stations, but nothing decoded.

I had this happen a couple of versions back, but that was the only time.  If 
you aren’t operating but just in monitor mode continuously, does it do the same 
thing?  I monitor 24/7 except when storms are in the area and have not had a 
problem, even since the 1.9.1 version was released.  It’s pretty strange to 
have the waterfall showing signals, but all of a sudden nothing is appearing in 
the decoded windows, but I have see it so I know it does happen.  You are not 
the first to report this recently, but it sounds like it is kind of rare.

Gary - AG0N
--
Check out the vibrant tech community on one of the world's most engaging tech 
sites, Slashdot.org! http://sdm.link/slashdot 
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT 1.8.0 RC3

[Chris Getman]

Hi Joe.

Keep up the great work, FT8 is just incredible, I use it almost every
afternoon on 20m & 17m.

I have read the release notes and I guess it is just different.
Now it takes two hands to change both frequencies at once.
I'm just not sure why you want to move them separately.

I guess it is for running splits, but I very seldom see anyone actually
doing that.
 
The old way with one click I could move freq and call CQ.
And on 20m you have to move around all the time. It can be very crowded.
And with FT8 time is critical as everything is fast moving.
So if a spot opens up you have seconds to grab it.
So I guess I just liked the Lock Rx-Tx feature so everything moved at once.

It will just take a little time to get it in my head to use both hands.

Thanks again for many fun afternoons.
Chris  -  N3PLM

-Original Message-
From: Joe Taylor [mailto:j...@princeton.edu] 
Sent: Tuesday, October 17, 2017 3:43 PM
To: WSJT software development <wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] WSJT 1.8.0 RC3

Hi Chris,

On 10/17/2017 3:19 PM, Chris Getman N3PLM wrote:
> I just downloaded Version 1.8.0 RC3 and found it missing the Lock 
> Rx-Tx feature.
> 
> In using FT8 from the beginning, I have only twice found a station 
> wanting to work splits.
> 
> So I really miss this feature.
> 
> Any chance of putting it back?

I don't understand this request.  Have you read the Version 1.8.0 Release
Notes?  *Help -> Release Notes* or
http://physics.princeton.edu/pulsar/k1jt/Release_Notes_1.8.0.txt

Also, see the list of *Special Mouse Commands* in the User Guide, near the
end of Section 10.1:
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-1.7.1-deve
l.html#MENUS

... or display the list using *Help -> Special Mouse Commands* or simply
*F5*.

-- 73, Joe, K1JT


--
Check out the vibrant tech community on one of the world's most engaging
tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] WSJT 1.8.0 RC3

[Chris Getman]

I just downloaded Version 1.8.0 RC3 and found it missing the Lock Rx-Tx
feature.

In using FT8 from the beginning, I have only twice found a station wanting
to work splits.

So I really miss this feature.

Any chance of putting it back?

 

Chris  -  N3PLM

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel