[wsjt-devel] MINT 22 no audio cards detected

t..." Today's Topics: 1. Re: [Wsjt-x-improved-community] MINT 22 no audio cards detected (Adrian) -- Message: 1 Date: Thu, 29 Aug 2024 01:38:43 +1000 From: Adrian To: Pino Zollo,wsjt-devel@lists.sourcefo

[wsjt-devel] MINT 22 no audio cards detected

I just made a fresh installation of Mint 22 MATE Then I have compiled both WSJT-X 2.7.0-rc6 and wsjt-x improved 2.7.1 version 240814. Both present the same problem the list of audio devices is empty so none can be selected. I went on Mint site https://www.linuxmint.com/rel_wilma.php

[wsjt-devel] 2.7.x TX/RX cicle at start

Hi, the new versions 2.7.x both in the Joe standard and in the Uwe improved, exhibit a strange behavior at start: The radio cicles between RX and TX very quickly and a lot of times with noise from the antenna relay. While on my IC-7300 it stops after a while, on my IC-707MKIIG sometime it

[wsjt-devel] Compiling error on fftw3.mod

Please, can somebody help me to find the reason of this compiling error: [ 11%] Building Fortran object CMakeFiles/wsjt_fort.dir/lib/downsam9.f90.o f951: Fatal Error: Reading module ‘fftw3.mod’ at line 1256 column 27: Unexpected EOF compilation terminated. It happens with all versions of wsjt-

[wsjt-devel] Mint 21.3 Virginia

FYI: After upgrading to Mint 21.3 no digimode will work any more. The reason is that NTP in not installed and the time will shift. The solution is to install NTP again. 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net h

[wsjt-devel] CQ Hound mode

Just an idea: When in Hound mode the DX station should call  as: CQH DX0CALL GRID or CH  DX0CALL GRID best 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] libboost and Mint 21

wsjtx 2.5.4 .deb requires libbost-filesistem 1.71.0 but on Mint 21 comes version 1.74.0 so wsjtx 2.5.4 .deb can not be installed. On https://www.boost.org/users/history/ is already available the version 1.80 Best 73 Pino ZP4KFX ___ wsjt-devel m

Re: [wsjt-devel] TX..RX with different radios

virtual audio channel. It’s difficult to suggest a detailed set up without knowing the specific equipment you want to use. Look at you WSJT setup tab and see what sources you have listed. Sent from my iPad On Aug 21, 2022, at 2:20 PM, Pino Zollo via wsjt-devel wrote:  Please how could I

[wsjt-devel] TX..RX with different radios

 Please how could I configure wsjtx to receive via an SDR dongle and transmit via a regular radio(IC-706 in my case) ? If not possible, please, consider it as a future improvement. This is very useful on the low bands... e.g. on 630m the IC-706 transmits something...but its RX is undefi

[wsjt-devel] no call

Somebody is calling me: 191730 -14 0.2 2462 ~ ZP4KFX <...> -05 what a mystery !! 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] WSPR Drift

Please how shall I interpret Drift = 3 in a WSPR message ? In which unit is it expressed ? Thanks Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Source 2.5.0 still corrupted

I have download again the source and in compiling again from scratch: --- [ 25%] Building Fortran object CMakeFiles/wsjt_fort_omp.dir/lib/downsam9.f90.o f951: Fatal Error: Reading module ‘fftw3’ at line 1256 column 27: Unexpected EOF compilation terminated. make[5]: *** [C

[wsjt-devel] Compilation error 2.5.0

Compiling from sources on Linux Mint 20.2 73 ZP4KFX - [ 17%] Built target wsjt_cxx [ 17%] Building Fortran object CMakeFiles/wsjt_fort_omp.dir/lib/downsam9.f90.o f951: Fatal Error: Reading module ‘fftw3’ at line 1256 column 27: Unexpected EOF compilat

[wsjt-devel] Help!: no sound card detected.

Please some help: I have just reinstalled Mint 20.1 and done a fresh recompilation of wsjt-x 2.3.1... Now wsjt-x does not detect any sound card ...the computer is the same that I have used for the past 3 years. All other audio programs work normally. I have all the rights as administrator.

[wsjt-devel] Green RX Mark

Green RX Mark can not be set lower than 200Hzbut decodes a station at 161Hz 73 Pino ZP4KFX 001700 -9 0.1 161 ~ CQ LU8DPM GF03  Argentina 001730 -15 0.1 161 ~ CQ LU8DPM GF03  Argentina ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net

[wsjt-devel] Trying to compile on Ubuntu 20.10 for Raspberry

Please help with the missing library. 73 Pino ZP4KFX --- CMake Error at CMakeLists.txt:918 (find_package):   By not providing "FindQt5.cmake" in CMAKE_MODULE_PATH this project has   asked CMake to find a package configuration file provided by "Qt5", but   CMake did not find

[wsjt-devel] PSKReporter---V.2.3.0-rc1

I am on 6m but pskreporter receives my working conditions on 60m 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] 160m FST4W frequency

Hi, I have noticed that the frequency chosen for FST4W in 160m band is 1,908000 Please chose a frequency below 1850 as here in ZP land we are allowed only from 1800 to 1850. TU Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourcefor

[wsjt-devel] RX FST4 & RST4W

Hi, I wonder if the program can decode at the same time all the different tone spacing ... Having to chose between 7 T/R periods every one with different tone spacing, which is the probability of having chosen the right one ? 73 Pino ZP4KFX ___ ws

[wsjt-devel] Error in install

Hi Pino, thanks for the issue report. This is due to some code that is not compatible with the older version of the Qt framework on your system. The following patch should resolve the issue. Replace the empty wsjtx.patch file that resides at the root directory of the unzipped WSJT-X sources ta

[wsjt-devel] Raspberry libgfortran5 >= 10

Please where is the libgfortran5 >= 10 library needed for  wsjtx_2.3.0-rc1_armhf.deb   ? TU Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourc

[wsjt-devel] Error in install

It compiles wellbut   sudo cmake --build . --target install  end with the following errors: I had no problems with the previous versions. (Mint 18.3 Sylvia 64 bits)  the .deb version lacks off a library. Any help? 73 Pino ZP4KFX --- /home/pino2/src/wsjtx-2.3.0-r

Re: [wsjt-devel] Waterfall spectra

No change in the electric installation of my house but the water fall is dirty with the new FT4 release I can switch to the old one and the waterfall appears clean. 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net

Re: [wsjt-devel] F/H sequence

Hi Steve... you are right. for some strange case WSJTX was not in F/H mode any more. The configuration had retained the frequencies but not the F/H mode. Sorry 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https:

Re: [wsjt-devel] F/H sequence

This morning again and worst: 5X3E dis answer +02 but my WSJTX did not catch it. I did change by hand to R-02 and then did not catch RR73 and by hand I did force 73 73 Pino ZP4KFX 101930 -3 0.4 337 ~ RV0AR 5X3E -04 101945 Tx 1729 ~ 5X3E ZP4KFX GG14 102000 -2 0.4 337 ~ RV0AR RR73; ZP4KFX <5X3

[wsjt-devel] Changing configuration

Only with the new 2.0.1 it was OK with the old 2.0.0 I have two Configurations: one for normal QSOs ant the second for F/H. Changing from normal to F/H all OK. Changing back appear the error: see the pic. The only cure is to restart WSJT 2.0.1. 73 Pino ZP4KFX

[wsjt-devel] F/H sequence

Wrong sequence: WSJT 2.0.1 does not realize having received RR73 and replies with R-20 I had to force by hand the 73 I have seen this fact 3 times with different F/H stations. 73 Pino ZP4KFX 20415 Tx 1321 ~ 7P8LB ZP4KFX GG14 220430 -20 0.0 303 ~ ZP4KFX 7P8LB +00 ? a3 220445 Tx 1321 ~ 7P8LB Z

[wsjt-devel] MSK144 2.0 no decode

Sorry I have just known that ZP9CTS was using MSHV 2.05 :-( it seems that they did upgrade FT8 but not MSK144 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt

[wsjt-devel] MSK144 2.0 no decode

This morning I, ZP4KFX and Milton ZP9CTS, have tried MSK144 on 2m band. There was tropo...signals S5 I using V2.0 on Linux and Milton V2.0 on Windoz No decode at all ! :-( We changed to FT8 and all was OK At the link: https://cloud5.tcpsas.com/index.php/s/fijk6j0tZ2IULkh you can fin

[wsjt-devel] Libraries

Finally  did succeed in compiling V. 2.0.0 on my Mint 18.3 Here is the list of the libraries that I had to install to complete the task. --- asciidoc (8.6.9-3) a2ps (1:4.14-1.3) psutils (1.17.dfsg-2) libqt5serialport5-dev (5.5.1-2build1) asciidoctor (1.5.4-1) libqt5m

Re: [wsjt-devel] libc6 2.27

, Pino Zollo wrote: > I am trying to install on Linux Mint 18.3 64 bits...which has libc6 2.23. > > but wsjtx 2.0.0 needs libc6 >= 2.27 . > > Please help ! > > 73 > > Pino ZP4KFX Hi Pino, the Debian package we released for WSJT-X 2.0.0 GA is targeted at Ubuntu 18.04, the

[wsjt-devel] libc6 2.27

I am trying to install on Linux Mint 18.3 64 bits...which has libc6 2.23. but wsjtx 2.0.0 needs libc6 >= 2.27 . Please help ! 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/

[wsjt-devel] strategy for release of version 2.0 of WSJT-X

I see a lot of problem in a drastic change May I suggest to change the name of the new FT8 so something like FT8-B or FT77 and allow a double mode (like it was JT9+JT65) to FT77+FT8. 73 Pino ZP4KFX ___ wsjt-devel mailing list wsjt-devel@lists.s

[wsjt-devel] Fox at 7074 ?

Wasn't it disabled on standard frequencies ? 73 ZP4KFX 212100 Tx 752 ~ KH2F ZP4KFX GG14 212045 -13 0.1 2493 ~ ZP4KFX UN3GX MN83 212115 -12 0.4 695 ~ ZP4KFX KH2F -25 212130 Tx 752 ~ KH2F ZP4KFX R-12 212115 -10 0.1 2493 ~ ZP4KFX UN3GX MN83 212145 -9 0.3 695 ~ ZP4KFX RR73; SP9HZW -22 212200 T

[wsjt-devel] Frequencies list

Hi, Having used F/H DXpedition mode a few times I feel the need to have two frequencies listsone for the normal operations and one for the DXpeditions. In alternative we could have the mode renamed to FT8FH so, when selected, the program could go straight in H mode with a different frequencie

[wsjt-devel] May I be a FOX ?

Hi everybody, I am Pino, ZP4KFX. I am not a DX expedition but it seems that I am the only ZP4 station remained. Years ago the where moretwo went SK... the others seem QRT. If I appear on 20m or 17m a huge pile-up grows over me...and I am not a contester and neither a good DX operator... i

[wsjt-devel] wsjt_status.txt

I am running th 1.9.1 since a couple of days, but I can not locate the file wsjt_status.txt as stated in http://physics.princeton.edu/pulsar/k1jt/New_Features_1.9.1.txt - DX grid locator sent to wsjt_status.txt, for use by applications like PstRotatorAZ 73 Pino ZP4KFX --

Re: [wsjt-devel] Release of WSJT-X Version 1.9.0

On Linux Mint 18.3 64bit GDebi refuses to install because of the version "Already installed a posterior version" 73 Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech sites, S

[wsjt-devel] C8T DXpedition

On 40m worked easily ... 73 de ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ wsjt

[wsjt-devel] +00

Having received the report +00 Log QSO does show an empty value in Rpt Rcvd (V. 1.9.0-rc4) 73 Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://

[wsjt-devel] Burkina-Faso

124700 -18 0.3 722 ~ CQ D1M KN88  !where? still violet after having been logged 73 Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashd

[wsjt-devel] error message

de Pino ZP4KFX Having received a fake message maybe for Decode: Enable AP... On 15m just monitoring with 1.9.0-rc3 on Mint Linux 194130 -8 -1.3 1624 ~ ZP4KFX RR73; Z56LYH -16 -- Check out the vibrant tech community on

[wsjt-devel] [SPAM] Fwd: WSPR X 3

Hi, I can run 3 instances of WSJT-X in WSPR mode  with 3 radios... ...maybe one on 160m, one on 6m ant the 3rd on 2m. As my antennas are arranged in a small space, to avoid interferences, I would like that all the 3 instances transmit at the same time.

[wsjt-devel] Guantanamo

KG4W appears as USA in violet as if it were a new one and keeps being printed in violet also after having been saved at log. V. 1.9.0-rc2 73 Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most

[wsjt-devel] DXpedition mode

Hi, yesterday night on 160m I did answer to the CQ of 5B4AIF. He replied  in DXpedition mode to me and to a G4 station. On my screen appeared a small window saying: "You should be in  DXpedition mode". I quickly changed to DXpedition mode, but an other small window said me that I should be in S

Re: [wsjt-devel] Public test of FT8 DXpedition mode March 6-7

Hi, I made the QSO (TU Joe K1JT), but after it the DECODER went stuck no more decoding even if the band was full of stations. I had to close the program and started it again ... After a while the problem appeared again; this time the button DECODE did remain blue fixed. ...I was changing

[wsjt-devel] Always on the visible working area

I have two displays ... One is dedicated to WSJT-X; the other to WEB and other applications. I am on Linux Mint 18.3. Right clicking on the top bar of wsjt-x I set "Always on the visible working area". The problem is that this setting does not last very muchafter a while of using this

Re: [wsjt-devel] Public test of FT8 DXpedition mode March 6-7

Hi, being hound, I have not clear if set up split operation as Rig or Fake it. Can please explain... if rig how to set the TX freq. on the rig ? TU de Pino ZP4kfx -- Check out the vibrant tech community on one of the

[wsjt-devel] Save: None

Hi, WSJT-X keeps writing files.wav in the directory save  also if the save option is "none". I have noticed that these file sometime disappearbut with the time they sum up and occupy a lot of space in the disk. Is this normal ? Thanks Pino ZP4KFX --

[wsjt-devel] Macros

Hi, It would be nice to have variables in TX macros ... e.g %MYCALL  %HISCALL TU Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashd

[wsjt-devel] wsjtx_log.adi limit

Hi, Is there a limit to the dimension of wsjtx_log.adi ? Mine is now 508.8 KB. This morning I made a lot of QSOs but only the first 2 have been logged... Th others are not there ...many OM will hate me. 73 Pino ZP4KFX ---

[wsjt-devel] rc3....dobleclick

Just to notify that also 1.8.0, like the previous rc3, has this problem which didn't exit in rc2 and previous... The symptom is that a message with my call appears only on the left side (band activity) but not on the right side  (RX Frequency) even if the other station is exactly on the g

[wsjt-devel] 1.8.0 deb on rc3

Hi, Trying to install WSJT-X Version 1.8.0 October 27, 2017 on the previous rc3 (Linux wsjtx_1.8.0_amd64.deb ) the program GDebi refuses saying that a newer version is already installed. 73 Pino ZP4KFX -

[wsjt-devel] rc3....dobleclick

Hi... it is very difficult to reproduceI know it... ...but wit rc3 there is a problem absent on previous versions... it happens from time to time... ... Somebody answers to my CQ... (even with Call 1st enabled)  and the programs keeps sending CQ... ... I dobleclick on the red line but

[wsjt-devel] Fake QSO

With TX NOT Enabled after having called for a while than I have enabled TX after the RRR 1.8.0-rc3 on Linux. :-( Best 73 Pino ZP4KFX 13400 Tx 469 ~ IS0FWY ZP4KFX GG14 213445 -18 0.2 468 ~ ZP4KFX IS0FWY -13 213515 -18 0.2 468 ~ ZP4KFX IS0FWY R-13 213545 -18 0.2 468 ~ ZP4KFX IS0FWY RR

[wsjt-devel] Auto-sequence and JT65/JT9

Please, Add autosequence also to JT65/JT9 modes With the arrive of FT8 these modes are deadbut I think that they are excellent for QRP Now on FT8 a see big powers...knowing my power and seeing the difference of reports. 73 de Pino ZP4KFX --

[wsjt-devel] No QSY

Hi, I would like to click on a CQ line, get all the information but the frequency... i.e. answering on my actual frequency...not on the caller frequency. The same on a line of a station that is ending a previous QSO. Is there any way ? 73 Pino ZP4KFX ---

[wsjt-devel] rc2 RI1ANO

1.8 RC2 201930 -4 0.4 1393 ~ CQ RI1ANO GC07 S. Shetland Is. Isn't it in Antarctica ? 73 de Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm

[wsjt-devel] rc2 IC-7300 codec

Hi, The new version does not recognize any more the "CODEC" audio interface as generated by the USB connection to the IC-7300. 73 Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engagin

[wsjt-devel] Autoseq.

Auto sequence does not seem to work with calls like SV5/SV1LK 215015 Tx 1833 ~ SV5/SV1LK ZP4KFX 215045 Tx 1833 ~ SV5/SV1LK ZP4KFX 215100 -15 0.3 1834 ~ ZP4KFX SV1LK -10 215115 Tx 1833 ~ SV5/SV1LK ZP4KFX 215118 Tx 1834 ~ SV1LK ZP4KFX R-15 215145 Tx 1834 ~

[wsjt-devel] Two instances

El 21/08/17 a las 10:49, wsjt-devel-requ...@lists.sourceforge.net escribió: > Do you need a unique logging file because of importing to another program or > because of updating the worked B4 status in both instances ? Alexandre For WB4 and new-ones ... 73

[wsjt-devel] Two instances

jtx had the same informations. > de Mike W9MDB > > From: Pino Zollo > To: wsjt-devel@lists.sourceforge.net > Sent: Saturday, August 19, 2017 8:28 PM > Subject: [wsjt-devel] Two instances > > I am running two instances of WSJT-X 1.8...with two different r

[wsjt-devel] Two instances

I am running two instances of WSJT-X 1.8...with two different radios... on Linux is it possible to have a single, unic, logging file ? can I do symbolic links without messing up the log data ? TU 73 Pino ZP4KFX

[wsjt-devel] Volume 1.8.0-rc1

Every time that I run WSJT-X 1.8.0-rc1 I find that the volume of input has been reset to a very high level ...100% ... I have to lower it to "no amplification" (running on Linux Mint 18.2) ...1.7... on Mint 17.3 had not this behavior. 73 Pino ZP4KFX ---

[wsjt-devel] Feature request on colors

I find the green misleading I have lost many QSOs for it... I had already done that stationsbut on other bands... It should be green only if done on the present band. 73 Pino ZP4KFX -- Check out the vibrant

[wsjt-devel] Call 1st...Call weaker

When in the pile-up I use to answer first to the weakest signal it is more fun and avoids the rush to high powers. ...so please add "Call weaker" to the 1.8 for FT8. Best 73 Pino ZP4KFX -- Check out the vibrant tec

[wsjt-devel] Received report

El 26/07/17 a las 07:01, wsjt-devel-requ...@lists.sourceforge.net escribió: > On 26/07/2017 01:18, Pino Zollo wrote: >> Received report belonging to other station: 1.7.0 >> QSO: >> 0005 Tx 1003 # CQ DX ZP4KFX GG14 >> 0006 -25 0.0 1002 # ZP4KFX W8VK EN70 &g

[wsjt-devel] Received report

Received report belonging to other station: 1.7.0 QSO: 0005 Tx 1003 # CQ DX ZP4KFX GG14 0006 -25 0.0 1002 # ZP4KFX W8VK EN70 0007 Tx 1002 # W8VK ZP4KFX -25 0008 -13 0.2 1003 # ZP4KFX JS6SVV -08 0009 Tx 1002 # W8VK ZP4KFX -25 0010 -23 -0.0 1003 # ZP4KFX W8VK RRR 0011 Tx

[wsjt-devel] libgomp1 >=4.9

Please, where to find libgomp1 >=4.9 for Mint 17.3 alias Ubuntu 14.04 32bit ? Here is not available: https://packages.ubuntu.com/search?keywords=libgomp1 neither here: https://pkgs.org/download/libgomp1 TU 73 Pino ZP4KFX

[wsjt-devel] Distortion report

I miss a way to notify a distortion on the emitted signal. e.g. see the attached image with 4 or more decoding spectra. I have seen other types of distortions: 2nd an 3rd harmonics all decoding 2n and 3rd harmonic do not decode because the spectrum is X2 or X3 wide. A shadow spectrum on the le

[wsjt-devel] 30m

Hi, would it be possible to decode also WSPR signals in the 30m band ? TU 73 de ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdo

Re: [wsjt-devel] UTC

El 01/05/17 a las 10:30, wsjt-devel-requ...@lists.sourceforge.net escribió: > Why?? Either way is ISO8601. Because it is easier to understand that it is a time and not e frequency ... at first glance... ...without having to look at the column name. > > de Mike W9MDB >

[wsjt-devel] UTC

Suggestion: Print the times in the UTC column with a colon between hours and minutes. e.g. instead of print 22:22 TU de Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech

[wsjt-devel] USB0...USB1

TU Mike W9MDB TU Magne / la1bfa It seems to work since few hours Best 73 Pino ZP4KFX -- Announcing the Oxford Dictionaries API! The API offers world-renowned dictionary content that is easy and intuitive to

[wsjt-devel] USB0...USB1

Hi, from time to time my connection USB to the IC-7300 changes from /dev/ttyUSB0 to /dev/ttyUSB1. This makes rigctld loose the control of the radio. Is there any method to tie /dev/ttyUSB0 to a specific physical USB port ? TU Pino ZP4KFX -

[wsjt-devel] IC-7300 control lost

End of show . El 02/03/17 a las 19:11, wsjt-devel-requ...@lists.sourceforge.net escribió: > #4 You still haven't sent us enough of the log to see what was going on > what it stopped... rig_register (372) icom_init: civ_version=1 rig_set_conf: civaddr='0x94' rig:rig_open called s

[wsjt-devel] IC-7300 control lost

El 02/03/17 a las 19:11, wsjt-devel-requ...@lists.sourceforge.net escribió: > > I'm no expert, but is this command legit? > > > fe fe 94 e0 1c 00 fd > > > According to the manual > http://www.icom.co.jp/world/support/download/manual/pdf/IC-7300_ENG_CD_0.pdf > and this site http://w

[wsjt-devel] IC-7300 control lost

El 02/03/17 a las 16:36, wsjt-devel-requ...@lists.sourceforge.net escribió: > #4 You still haven't sent us enough of the log to see what was going on > what it stopped... > > I will do it tonight --- write_block(): TX 7 bytes fe fe 94 e0 1a 03 fd.

[wsjt-devel] IC-7300 control lost

El 02/03/17 a las 15:26, wsjt-devel-requ...@lists.sourceforge.net escribió: > #4 You still haven't sent us enough of the log to see what was going on > what it stopped... > > I will do it tonight > >> I suspect a computer problem on your part right now. > maybethe behavior is the same on th

[wsjt-devel] IC-7300 control lost

El 02/03/17 a las 11:21, wsjt-devel-requ...@lists.sourceforge.net escribió: > #1 Try reducing the poll interval on WSJT-X in File/Settings/Radio in the > upper right corner. Tried polling from 1 to 2 secondsno change. #2 What OS are you on? Linux Mint 17.3 #3 Have you tried uninstalling

[wsjt-devel] IC-7300 control lost

El 02/03/17 a las 05:28, wsjt-devel-requ...@lists.sourceforge.net escribió: > Do you have a dummy load you can test with?One question is does it fail only > when you transmit and on certain bands? > de Mike W9MDB Hi Mike The problem shows also in RX only... Any how I did wound the USB cable

[wsjt-devel] IC-7300 control lost

El 01/03/17 a las 15:15, wsjt-devel-requ...@lists.sourceforge.net escribió: >> HI Pino, >> >> do you have the correct baud rate selected and the correct serial port. >> -s and -r arguments to rigctld. >> > > ohoops.. this is the right command: > > /usr/local/bin/rigctld-wsjtx -m 373 -c 0x94 -s

[wsjt-devel] IC-7300 control lost

El 01/03/17 a las 12:27, wsjt-devel-requ...@lists.sourceforge.net escribió: > HI Pino, > > do you have the correct baud rate selected and the correct serial port. > -s and -r arguments to rigctld. > ohoops.. this is the right command: /usr/local/bin/rigctld-wsjtx -m 373 -c 0x94 -s 9600 -r

[wsjt-devel] IC-7300 control lost

El 01/03/17 a las 01:25, wsjt-devel-requ...@lists.sourceforge.net escribió: > In the WSJT-X rig selection you use "Hamlib NET rigctl".? > First, start rigctld-wstx like you did before. ?When you select the rig as > above you'll see it connect and messages start flowing.That's the capture I > ne

[wsjt-devel] IC-7300 control lost

El 28/02/17 a las 21:49, wsjt-devel-requ...@lists.sourceforge.net escribió: > You need to run WSJT-X using Hamlib NET rigctl and re-run this until it fails. > de Mike W9MDB Hi Mike, it is not clear to me please which commands shall I give ? 73 Pino ZP4KFX

[wsjt-devel] IC-7300 USB-D --> IC-7300 control lost

Hi Bill, El 28/02/17 a las 15:45, wsjt-devel-requ...@lists.sourceforge.net escribió: > what version of WSJT-X are you using? 1.7.0 last version distributed via PPA on Mint 17.3 > > The WSJT-X "Settings->Radio->Mode" options determine if WSJT-X controls > the mode of your rig and whether USB or

[wsjt-devel] IC-7300 USB-D -> IC-7300 control lost

El 28/02/17 a las 15:45, wsjt-devel-requ...@lists.sourceforge.net escribió: > Can you run using rigctld-wsjtx with -v and send me the log output? > ?Capture the output with typescript for example? > Not sure if the IC7300 has had a lot of testing on WSJT-X.You do, of course, > want to opera

[wsjt-devel] IC-7300 USB-D

Hi I have just started to test the connection of WSJT-X with the IC-7300 using the USB cable with a Linux PC with Mint 17.3. I have found that mode USB-D is modified by WXJT-X as well as the filter setting FIL1. Just pressing TUNE the radio goes in TX but releasing TUNE the radio goes in USB and

[wsjt-devel] WSJT-X v1.7-rc2

http://physics.princeton.edu/pulsar/k1jt/wsjtx_1.7.0-rc2_i386.deb on Mint 17.1 32 bit libgom1 >= 4.9 problem where to get it ? distribution gives the 4.8 73 Pino ZP4KFX -- The Command Line: Reinvented for Modern Dev

[wsjt-devel] Good news

Good news for QRA64 https://vhf-uhf.veron.nl/succesvolle-transatlantisch-tweeweg-verbinding-op-2mtr-gemaakt/ -- Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://s

[wsjt-devel] JT65 received trough TEP

Developers might be interested in this sequence of JT65 signal received in GG14hq trough Trans Equatorial Propagation on 6m band using a 10 el antenna 16m o.g. http://cloud5.tcpsas.com/index.php/s/nImEyGUQD2B5zmy Signals are quite strong but very few can be decoded. Which digital mode is mo

[wsjt-devel] R0 at low angles

HIReadability ZERO at low angles Maybe a little out of topic, but I am sure that in the group there are the right competencies. The fact: Since few days, at night, with the friend Alberto ZP9SC, we try to do some QSO via TEP on 6m band. We keep in touch via a Telegram chat channel. Th

[wsjt-devel] Documentation

Please, fill the paragraph 8.3. EME with JT65 TBD …​ ...shall I use VHF mode on 6m band ? TU Pino ZP4KFX -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.ne

[wsjt-devel] WB4

WSJT-X ... the worked before appear with green background... it seems to me that it is not band dependent... it should be green only if that station has been worked already on the selected band actually in use. 73 Pino ZP4KFX ---

[wsjt-devel] WSJT Audio card error

Hi, Selecting 0 for Input and output, or 17 the reception is OK but transmission is done on the USB PnP device (4) I have tried all possible configurations but without luck. Any help please ? 73 Pino ZP4KFX --- pino@Radio3:~$ /usr/local/wsjt/bin/

[wsjt-devel] Incredible

I find incredible that WSJT-X can decode two signals on the same frequency, one very strong and the other very weak This was tonight on 80m band 0005 -4 0.3 1547 # ZP4KFX PY2KP 73 0005 -25 -0.2 1545 # ZP4KFX LU3ADP GF05 ...excellent job guys !! Best 73 Pino ZP4KFX -

[wsjt-devel] Lock TX=RX

Version 1.7.0 rc1 Linux mode JT9+JT65 Lock TX=RX is gray ...can not be disabled, while TX<-RX and RX<-TX are black...but useless .. Whats the problem ? 73 Pino ZP4KFX -- What NetFlow Analyzer can do for you? Monitor

[wsjt-devel] QRV QRA64

I am QRV at 14.076 TX3000 in QRA64 mode beaming Europe 73 Pino ZP4KFX -- ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/lis

[wsjt-devel] WSJT versus WSJT-X

HI, Please can you tell the differences in performance in usinh WSJT-X 1.7.0 on EME versus WSJT 10.0 ? At present I can only use WSJT-X what do I miss ? TU 73 de Pino ZP4KFX -- _

[wsjt-devel] Help configurin audio for WSJT

HI... On my setup (Linux Mint 17.1) WSJT-X 1.7.0 works very fine with audio card: alsa_input.pci__00_1b.0.analog-stereo Mono alsa_output.pci__00_1b.0.analog-stereo Mono But with WSJT 10.0 and WSJT 9.3 I am not able to configure alsa which gives error. Audio device 0 2 giv

  1   2   >