Hi Bill, El 28/02/17 a las 15:45, [email protected] escribió: > what version of WSJT-X are you using?
1.7.0 last version distributed via PPA on Mint 17.3 > > The WSJT-X "Settings->Radio->Mode" options determine if WSJT-X controls > the mode of your rig and whether USB or USB-DATA mode is used. > Found the solution into the WSJT-X configuration....now it is stable in USB-D. > With Icom rigs you must disable "CI-V Transceive Mode" in the rig's > menu, this option which is on by default causes unsolicited CAT traffic > that can give unexpected and undesirable behaviour. > TU done... > You should also do a basic RFI check by doing a test transmission into a > dummy load or at least on minimum power on the rig. There have been a > few reports of what appears to be RFI issues with the USB interface on > the IC-7300. The problem is present also in RX only, without TXing. ...after few minutes of operation the PC loses the control of the radio and opens a window to ask for retry or leave. ...also the audio gets lost and I have to restart WSJT-x to get the control again. > > 73 > Bill > G4WJS. Best 73 Pino ZP4KFX ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
