El 01/03/17 a las 15:15, wsjt-devel-requ...@lists.sourceforge.net escribió:
>> HI Pino,
>>
>> do you have the correct baud rate selected and the correct serial port.
>> -s and -r arguments to rigctld.
>>
>
> ohoops.. this is the right command:
>
> /usr/local/bin/rigctld-wsjtx -m 373 -c 0x94 -s 9600 -r /dev/ttyUSB0
> -vvvvvv
Using rigctld-wsjtx is much more stable .... sometime works for an hour
or more....
...but when it fails the only cure is disconnect the USB cable, restart
rigctld-wsjtx and wsjt-x.
When it fails the output is:
-----------rigctl(d): 'currVFO' '' '' ''
rigctl(d): v 'currVFO' '' '' ''
rigctl(d): v 'currVFO' '' '' ''
rigctl(d): f 'currVFO' '' '' ''
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
Connection closed from localhost:54377
-----------------------
see the attached file WSJT-X-Tests.txt for details.
Best 73
Pino ZP4KFX
swhitches to WSPR
000 fe fe e0 94 1c 00 00 fd ........
rigctl(d): f 'currVFO' '' '' ''
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
rigctl(d): T 'currVFO' '0' '' ''
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
Connection closed from localhost:52864
Connection opened from localhost:52939
rigctl(d): 'currVFO' '' '' ''
rigctl(d): v 'currVFO' '' '' ''
rigctl(d): v 'currVFO' '' '' ''
rigctl(d): f 'currVFO' '' '' ''
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
Connection closed from localhost:52939
icom_init: civ_version=1
rig_set_conf: civaddr='0x94'
rig:rig_open called
serial_open: Unable to open /dev/ttyUSB0 - No such file or directory
rig_open: error = IO error
* but fldigi recognizes /dev/ttyUSB0 !!!!
* desconnected the USB cable and connected again....now it works again !
icom_init: civ_version=1
rig_set_conf: civaddr='0x94'
rig:rig_open called
Opened rig model 373, 'IC-7300'
Backend version: 0.7.2, Status: Stable
* at the end of a WSPR transmission:
read_string(): RX 8 characters
0000 fe fe e0 94 1c 00 00 fd ........
rigctl(d): f 'currVFO' '' '' ''
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
rigctl(d): T 'currVFO' '0' '' ''
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
Connection closed from localhost:53037
Connection opened from localhost:53056
rigctl(d): 'currVFO' '' '' ''
rigctl(d): v 'currVFO' '' '' ''
rigctl(d): v 'currVFO' '' '' ''
rigctl(d): f 'currVFO' '' '' ''
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
write_block():339 failed -1 - Input/output error
Connection closed from localhost:53056
* had to unplug the USB cable otherwise rigctld stuck
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
