One of my stations on linux here uses this exact same setup. I have best
results
running HRD as the rig select interface ( I run HRD under Crossover) I
found the direct FT-897 rig selection unreliable.
4800 bps via the AT-897 plus. Manual full tune done on each band change
before operation.
Hi Eddy,
so I can see what is happening, put the attached file into your WSJT-X
log files directory ("Menu->File->Open log directory"), restart WSJT-X,
do the minimum steps to reproduce the issue, then quit WSJT-X. It will
have created a file on your Desktop called WSJT-X_RigControl.log, send
Hi Bill and Michael,
Thanks for the tips, but no luck !! That was one of the first things I did
!!
73s
Eddy
On Sat, 4 Sept 2021 at 20:36, Bill Somerville via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Hi Eddy,
>
> note also that the CAT baud rate must be 4800 when using the
Hi Eddy,
note also that the CAT baud rate must be 4800 when using the pass-thru
CAT mode of that ATU.
73
Bill
G4WJS.
On 04/09/2021 18:07, Black Michael via wsjt-devel wrote:
Sounds like a baud rate mismatch.
Mike W9MDB
On Saturday, September 4, 2021, 10:54:59 AM CDT, Eddy Winrow via
Sounds like a baud rate mismatch.
Mike W9MDB
On Saturday, September 4, 2021, 10:54:59 AM CDT, Eddy Winrow via wsjt-devel
wrote:
Hello,I,m hoping you will be able help me.
Equipment: FT897D microham USBIII, LDG AT897 Plus
Problem: I have a Red Freqeuncy box and the OOB box is Red and
Hello,
I,m hoping you will be able help me.
Equipment: FT897D microham USBIII, LDG AT897 Plus
Problem: I have a Red Freqeuncy box and the OOB box is Red and shows
constant OOB.
when I try to select a Freq from the Dropdown box, shows the Freq selected
in Black and yellow, jumps back to a Red