Hello.
Using v2.0.0-rc2 on Linux/Ubuntu 18.04, with an Icom IC-7100 using the
USB-audio.
I've also been seeing this issue sporadically over the last week or so,
but I'm having a hard time trying to reproduce it.
Seems to happen more often if I have been cq'ing, and get a reply, and
I was able to reproduce this multiple times even after a reboot so I went back
to 1.9.1 for the last couple days.
Then today I get the fast ring update for Windows 10 which hosed my VB Cable
setup (and all my USB devices which updates seems to like to do) -- so
reinstalled VB and now I can't
Mike,
> On Oct 3, 2018, at 9:26 AM, Black Michael via wsjt-devel
> wrote:
>
> Having a problem with transmit signals behaving badly when 12dB down or more
> on RC2. The behavior I see is my output power gradually rises over about 3
> seconds and that's what started my investigation. If
This is the area that is related to this problem.The changes below do NOT fix
it completely but it behaves better.Just wanted to point out what I've found at
this time if helps identify what's going on.
--- a/Modulator.cpp
+++ "b/\\JTSDK\\tmp\\wsjtx-git-sf\\Modulator.cpp"
@@ -198,7 +198,8 @@
Michael:
I have noticed the same thing, especially when I change from 40 to 20 or
reverse. I always do a manual tune before an actual transmit and when
WSJTx sends the tones, I get the same 3-4 second build up to full power.
This only happens on the initial key up after changing bands. After
Having a problem with transmit signals behaving badly when 12dB down or more on
RC2. The behavior I see is my output power gradually rises over about 3
seconds and that's what started my investigation. If above 12dB no
problem...power is spot on when PTT is asserted...but this is just a
