Re: [wsjt-devel] Disabling "Enable TX" only works with "TX1"
Shortcut keys are under Help/Keyboard Shortcuts and F3 de MIke W9MDB From: Rich - K1HTV <k1...@comcast.net> To: g4...@classdesign.com; WSJT <wsjt-devel@lists.sourceforge.net> Sent: Thursday, July 27, 2017 2:47 PM Subject: Re: [wsjt-devel] Disabling "Enable TX" only works with "TX1" Bill, OK, so the key to starting with the TX2 message is to double click on the round bullet to the left of TX1 until the message text is greyed out. Then when I click on the CQing station's call, the TX1 message is skipped and the TX2 message is transmitted...got it. By doing this, now when a station called does NOT come back to my call, even if I use the TX2 message, the red "Enable Tx" button goes grey and my further calls to that station are stopped. Thanks. BTW, I've been reading the WSJT - Revision 7960: guide at: /branches/wsjtx/doc/user_guide/en But I haven't yet found where all of the various shortcut keys are defined. 73,Rich - K1HTV = = = Hi Rich, how are you selecting Tx2 to reply to a CQ call? If you are doing so by clicking the buttons next to it then WSJT-X will assume you know what you are doing and are already in a QSO. To use Tx2 to reply to CQ or QRZ calls you can double-click either of the buttons next to the Tx1 message to disable it, it will be greyed out to show that and Tx2 will be automatically used to reply to make initial calls to stations when you double click a decode. 73 Bill G4WJS. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Disabling "Enable TX" only works with "TX1"
Bill, OK, so the key to starting with the TX2 message is to double click on the round bullet to the left of TX1 until the message text is greyed out. Then when I click on the CQing station's call, the TX1 message is skipped and the TX2 message is transmitted...got it. By doing this, now when a station called does NOT come back to my call, even if I use the TX2 message, the red "Enable Tx" button goes grey and my further calls to that station are stopped. Thanks. BTW, I've been reading the WSJT - Revision 7960: guide at: /branches/wsjtx/doc/user_guide/en But I haven't yet found where all of the various shortcut keys are defined. 73, Rich - K1HTV = = = Hi Rich, how are you selecting Tx2 to reply to a CQ call? If you are doing so by clicking the buttons next to it then WSJT-X will assume you know what you are doing and are already in a QSO. To use Tx2 to reply to CQ or QRZ calls you can double-click either of the buttons next to the Tx1 message to disable it, it will be greyed out to show that and Tx2 will be automatically used to reply to make initial calls to stations when you double click a decode. 73 Bill G4WJS. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Disabling "Enable TX" only works with "TX1"
On 27/07/2017 01:08, Rich - K1HTV wrote: Using R7956, Tom is correct in that if the station you called answers another station, the "Enable TX" is stopped. But it is only true if you use the "Tx1" message to make the call. If the TX1 (Calls & Grid) message is skipped and the call is made by using TX2 (Calls and report), if the station called comes back to another station, the "Enable TX" remains red and calling continues on subsequent sequences until the "Halt Tx" button is clicked. I believe that no matter which TX message is being used, "Enable Tx" should be turned off automatically if the station I called is in the process of working another station. 73, Rich - K1HTV Hi Rich, how are you selecting Tx2 to reply to a CQ call? If you are doing so by clicking the buttons next to it then WSJT-X will assume you know what you are doing and are already in a QSO. To use Tx2 to reply to CQ or QRZ calls you can double-click either of the buttons next to the Tx1 message to disable it, it will be greyed out to show that and Tx2 will be automatically used to reply to make initial calls to stations when you double click a decode. 73 Bill G4WJS. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel