using? If you manually transmit from the Xastir menu does it behave
as expected?
Brett KQ9N
On Nov 11, 2017 4:03 PM, "Joseph LaFerla" <j...@laferla.ca> wrote:
Hi Dave
Thanks for the tip. I tried it but it made no difference. The tnc still
transmits at 30 min intervals, no ma
Just to clarify one point. I have tried the timing slider at different
positions and they do not seem to make any difference. At least though, it is
transmitting!!!
Joe
VA3JLF
Sent from Mail for Windows 10
___
Xastir mailing list
Hi all
I have xastir set to transmit position reports every 5 minutes
(Configure|Timing|Posit TX Interval). (5 minutes may be too often but I am
only using this temporarily for testing). I would like to set the timing to
every 15 minutes. However xastir is beaconing every 30 minutes
son
Sent: Saturday, November 11, 2017 3:46 PM
To: Xastir - APRS client software discussion; Joseph LaFerla
Subject: Re: [Xastir] Position transmit timing
Joe,
Make the changes you want...
Then { File | Configure | Save Config Now! }...
Then Quit Xastir...
Then Start Xastir...
Observe if change
.
Joe
VA3JLF
Sent from Mail for Windows 10
From: Joseph LaFerla
Sent: Saturday, November 11, 2017 6:20 PM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] Position transmit timing
Hi Brett
I have a webpage logged into aprs.fi and at the exact moment that the tx
appears
Hello
At present I am using static maps with xastir but am interested if xastir can
use zoomable google maps (or similar). I read something on the xastir archive
that pointed in a direction but could not find any followup. Could someone
please direct me to where I could download such maps.
, November 20, 2017 5:25 PM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] Movable zoomanble maps
On Mon, 20 Nov 2017, Joseph LaFerla wrote:
> At present I am using static maps with xastir but am interested if xastir can
> use zoomable google maps (or similar). I read som
Hi
With the help of many yesterday I was able to install xastir from source and
get it to work – with one exception. I forgot to save any maps from my
previous binary version. Now although xastir works fine, I have no map
displayed. The map chooser shows geogratis.gc.ca and nationalmap.gov
the map directories and you should have your online
maps again.
kd5mkv Steve
From: Xastir <xastir-boun...@lists.xastir.org> on behalf of Joseph LaFerla
<j...@laferla.ca>
Sent: Friday, November 3, 2017 6:41 AM
To: Xastir - APRS client software discu
I seem to have everything correct. When I moved from the binary, I did not
save any maps. What maps should I have with a clean install from source? And
like I said, the maps ARE listed in the Map Chooser and they ARE
in/usr/local/share/xastir/maps, it’s just that when I select any one of
Yes I have expand dirs checked. When I moved to the source, I deleted .xastir
and let xastir recreate the dir.
Joe
Sent from Mail for Windows 10
From: Jason KG4WSV
Sent: Friday, November 3, 2017 10:20 AM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] Maps
Did you click
software discussion
Subject: Re: [Xastir] xfontsel
On Tue, Oct 31, 2017 at 9:17 PM, Joseph LaFerla <j...@laferla.ca> wrote:
> Hi
>
> I am running xastir on my Stretch pi and have a question about changing
> fonts. I did look around the archives and googled but I still cannot get
>
tir - APRS client software discussion
> Subject: Re: [Xastir] xfontsel
>
> On Tue, Oct 31, 2017 at 9:17 PM, Joseph LaFerla <j...@laferla.ca> wrote:
> > Hi
> >
> > I am running xastir on my Stretch pi and have a question about changing
> > fonts. I did look arou
Hi
I have been experiencing problems displaying maps in Map Chooser and in the
main xastir execution window. I recently installed the latest version from
source. What happens is that my maps do not show up in the xastir window – I
have only a blank screen. In Map Chooser I have the Online
stalled you
> should have seen
> >> a "No" for Imagemagick/graphicsmagick support. Xastir needs
> that for online
> >> map support as well as support for some offline formats. After
> installing
> >> libwebp-dev and running configure
.
Maybe I’ll be able to send it to you via email and then you can forward to the
list.
Joe
Sent from Mail for Windows 10
From: David A Aitcheson
Sent: Saturday, November 4, 2017 8:07 PM
To: Xastir - APRS client software discussion; Joseph LaFerla
Subject: Re: [Xastir] Map Chooser and map display
. The gui xastir map
does not open and the terminal window just sits there.
Any ideas?
Joe VA3JLF
Sent from Mail for Windows 10
From: David A Aitcheson
Sent: Thursday, November 2, 2017 5:09 PM
To: Joseph LaFerla; Xastir - APRS client software discussion; Tom Russo
Subject: Re: [Xastir] xfontsel
OK Curt,
I had not started any configs so it was easier to delete the .xastir directory
and restart xastir from the /usr/bin/local directory. This time I did not get
any errors (!). When I go to Map Chooser, I see two online directories and I
chose geogratis.gc.ca but the map does not
HI Curt
Sorry, I forgot to add that the terminal window in which I started xastir
displays a large number of the following
convert_from_xastir_coordinates:X out-of-range (too low):4263101696
convert_from_xastir_coordinates:Y out-of-range (too low):4258554496
convert_from_xastir_coordinates:X
maps
On Sat, Dec 2, 2017 at 5:36 PM, Curt, WE7U <curt.w...@gmail.com> wrote:
> On Fri, 1 Dec 2017, Joseph LaFerla wrote:
>
> Could you point me to where I can turn on map caching? I’ve looked
>> everywhere and must have missed it.
>>
>
> As I recall it has to d
] Movable zoomanble maps
On Tue, 21 Nov 2017, Joseph LaFerla wrote:
> Thanks for this. I tried what you suggest and like it. The only problem
> though is that my internet connection is not very fast and zooming and
> panning when using online maps is not very smooth as a result. I wou
VA3JLF
Sent from Mail for Windows 10
From: davidf4
Sent: Saturday, October 28, 2017 6:19 PM
To: 'Joseph LaFerla'
Cc: 'Xastir - APRS client software discussion'
Subject: RE: Oregon Scientific wmr200
Joe,
It may be possible that one of the primary Xastir programmers (I couldn’t code
my way out
Hi Max
I read the posts and as far as I can tell, it is not resolved yet.
73
Joe
VA3JLF
Sent from Mail for Windows 10
From: Max Harper
Sent: Saturday, October 28, 2017 12:42 AM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] Xastir corrupts lxpanel
It's not a Xastir
ther Underground, CWOP/APRS, PSW
> Weather/WeatherForYou/HAMweather, Twitter
>
> So it may be possible to upload your weather data to those data streams
> directly from that program without involving Xastir.
>
> Dave
> KD7MYC
>
> -Original Message-
>> From: Jo
clarification.
73
Sent from Mail for Windows 10
From: Liz
Sent: Saturday, October 28, 2017 11:04 PM
To: xastir@lists.xastir.org
Subject: Re: [Xastir] Oregon Scientific wmr200 weather station
On Sat, 28 Oct 2017 22:06:15 -0400
Joseph LaFerla <j...@laferla.ca> wrote:
> Yes I have but Cumulu
Tom
You are right. I mistyped and the file is actually wx200d. And the script you
provided in your separate post will make this unnecessary.
73
Joe
VA3JLF
Sent from Mail for Windows 10
From: Tom Russo
Sent: Sunday, October 29, 2017 5:46 PM
To: Xastir - APRS client software discussion
Hi
I am new here and trying to set up xastir on my Raspberry pi. I have an Oregon
scientific wmr200 which connects with usb to a computer. I run CumulusMX to
read data from the wmr200 and output a wxnow.txt file. There is no option for
this on the xastir configure menu to connect this
Hi all
Thanks for your contributions to this discussion!
I am a member of another list and a fellow there posted a daemon called wd200d.
I have a copy of that. This is a link to it on my onedrive server
WD200D
I am not good at programming or any real advanced stuff but does this fit the
Hi Tom
Your script works like a charm.Thanks again for your help and that of
others who contributed as well. I did not set POLLTIME but left it as it. I
was not sure. The script set it at 10, was that minutes? Anyway, wxnow.txt
gets updated once a minute. What do you think I should
Hi all
Reading Jason’s post, I did an apt-get update and apt-get upgrade on my Stretch
pi and now Xastir has been running perfectly for 4 hours and 15 minutes without
losing the lxpanel. Previous to the update and upgrade, I would lose the panel
immediately upon starting xastir. So obviously
Hi
I am running xastir on my Stretch pi and have a question about changing fonts.
I did look around the archives and googled but I still cannot get xfontsel to
work. I choose configure|fonts and the fonts window opens up and all the
xfontsel buttons on the right hand side are greyed out. I
I experience the same thing, Bill. It is too bad actually because xastir is
very good progam but I have moved to YAAC instead, which runs quite well.
Joe VA3JLF
Sent from Mail for Windows 10
From: Bill Dornbush
Sent: Friday, October 27, 2017 5:03 PM
To: xastir@lists.xastir.org
Subject:
Do you have Smart Beaconing enabled? I think it enables by default and anyway
if smart beaconing is enabled, the setting Posit Tx Interval in
File|Configure|Timing is inoperative. This may be unrelated to your problem
but it stumped me nonetheless when I was setting xastir up.
Just a
others
as well. Size does matter!
Max KG4PID From: Joseph LaFerla <j...@laferla.ca>
To: Xastir - APRS client software discussion <xastir@lists.xastir.org>
Sent: Saturday, February 3, 2018 4:13 PM
Subject: [Xastir] Font size for station and station names
Hi
I am looking for
Hi
I am looking for a font size that can make the stations and station names
bigger because they are too small for my eyes! I came across Curt’s suggestion
in an earlier post which I reproduce below:
MAPS_LABEL_FONT_TINY:-adobe-helvetica-medium-r-normal--14-*-*-*-*-*-iso8859-1
Thanks Tom. I appreciate it.
Joe VA3JLF
Sent from Mail for Windows 10
From: Tom Russo
Sent: Friday, February 9, 2018 11:41 PM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] WXNOW.txt request
On Fri, Feb 09, 2018 at 10:34:01PM -0500, we recorded a bogon-computron
Tom Russo
This may come a little late but I was wondering if the script to support
wxnow.txt weather stations could incorporate a date and timestamp. It will
make it possible to check whether the weather station is sending proper updated
data. You may recall that some months ago you wrote
I was just wondering whether I should install the new Xastir alongside the
current version (in new directories of course) or simply run the Lee’s script
in the current directories. I have never had to do this before, so would
appreciate some help. Or should I uninstall the current version,
Mail for Windows 10
From: Lee Bengston
Sent: Wednesday, February 14, 2018 9:44 PM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] New Xastir build
On Feb 14, 2018 9:12 PM, "Joseph LaFerla" <j...@laferla.ca> wrote:
Sorry Tom, I can see your confusion. What
Sorry Tom, I can see your confusion. What I did last time was to run Lee’s
script for Raspberry pi. After that, all I did some time ago was to run
./update-xastir in ~./src/Xastir. Looking at the update-xastir script, it
seems that’s what I should do. Is that correct? And if I run
Hi
Using advice provide by you in the list I have managed to get xastir to boot
successfully using the window manager. The only thing that did not work is
that I tried to run this script
#!/bin/bash
# This shell starts xastir
echo "Starting start_xastir script"
xastir &
exit
*
Xastir
I am trying to run wxnowsrv.pl to connect xastir to my weather station. I am
using the following command
./wxnowsrv.pl //192.168.1.20/home/pi/CumulusMX/wxnow.txt 60
But am getting the following error message
Can't call method "accept" on an undefined value at ./wxnowsrv.pl line 155.
My wx
Hi
I have your exact same situation and I use VNC to configure and control the
remote console remotely. I used to use tigervnc which creates a virtual
desktop and stopped using it for the same reason that Jason gives.
Joe
VA3JLF
Sent from Mail for Windows 10
From: Jason KG4WSV
Sent:
Hi
Finally, I am actively trying to find a way to start Xastir after bootup of the
Raspberry pi gui. The other day we had a power failure which caused the pi to
reboot. Since I have until now always started xastir manually from a terminal
window with xastiur &, when the power came back
I thought I could post to the list but evidently not. I have uploaded the file
to my onedrive storage. Here is the link. I hope this works.
https://1drv.ms/u/s!AgwErNXnV3wQkK1L-l7UQ55uGPltow
Joe
VA3JLF
Sent from Mail for Windows 10
___
Xastir
Hi David
I wonder if this is it because I just checked my terminal window and there are
many instances of the following error warning
Warning
Name
Class
Character /260 not supported in font. Discarded.
This is repeater many times each time with a different name. I don’t know how
to fix it
Hi Tom
I did this and it took the character /260 error off so that is no longer a
problem. However the problem with the strange characters and line feeds from
the tnc continues. I wonder if this has to do with the tnc because the packet
data from the net display correctly all the time. I
ecember 5, 2018 10:15 PM
> To: Xastir - APRS client software discussion
> Subject: Re: [Xastir] xastir strange behaviour
>
>
> How is the Pi communicating to the TNC-Pi? Over the serial port or over
> I2C? If over serial, are you sure you disabled the console over serial
> p
I am using the TNC-PI2 with absolutely no problems. Doesn’t directly answer
your question but I thought I would pass on the information.
Joe
VA3JLF
Sent from Mail for Windows 10
From: Michael
Sent: Saturday, December 8, 2018 1:55 PM
To: xastir@lists.xastir.org
Subject: [Xastir] Xastir with
Thanks Tom for this. I did not remember that it was in the distribution now.
The script is running fine on my Raspberry pi with a connection to another pi
running my CumulusMX weather station.
Joe
Sent from Mail for Windows 10
From: Tom Russo
Sent: November 27, 2019 12:26 AM
To: Xastir -
g
make[4]: Leaving directory '/home/pi/src/Xastir/build'
make[3]: Leaving directory '/home/pi/src/Xastir/build'
make[2]: Leaving directory '/home/pi/src/Xastir/build'
make[1]: Leaving directory '/home/pi/src/Xastir/build'
Sun 07 Jun 2020 08:38:08 AM CDT
pi@raspberrypi:~/src/Xastir $
Tom Henderson
Hi
I have been using xastir for a long time, most recently successfully with
stretch. I have since updated my os to buster and the xastir script does not
work in buster.
Can you please advise whether it is anticipated to fix this so that xastir can
be run under buster?
Thanks in advance.
gt; make[2]: Leaving directory '/home/pi/src/Xastir/build/callpass'
> make[2]: Entering directory '/home/pi/src/Xastir/build'
> make[3]: Entering directory '/home/pi/src/Xastir/build'
> make install-exec-hook
> make[4]: Entering directory '/home/pi/src/Xastir/build'
> rm -rf /usr/local/
53 matches
Mail list logo