I have tried for days now, and there is only one solution:
The IMPS/2 protocol doesn't support the Logitech's Resolution Feature.
According to Logitech Specifications, their more modern optical wheel
mice have an optical resolution of 800dpi. However, using XFree with
the IMPS/2 mouse driver, I
Good day!
I have a problem. X-server couldn't start with new-compiled
kernel ( 2.4.20-20 or 2.6.0-test6 ). With old system kernel (2.4.20 -
ASPLinux) XFree works properly. What I have to do to start it with
new-compiled kernels? Thank You.
This is my XFree86.0.log:
_XSERVTransSocketOpen:
Hi all.
I posted this issue some days before, but got no reply to my support request.
The Situation:
IBM Thinkpad T30 (Radeon Mobility 7500) with an external LCD:
The user tries to log out from his fvwm2 session. I don't know what happens realy, but
I think
the xserver will be restarted, but
Mike, thanks for tips. I use laptop and there is no
attached mouse, only pad which is PS/2.
Valentine.
--- Mike A. Harris [EMAIL PROTECTED] wrote:
On Thu, 23 Oct 2003, Valentine Kouznetsov wrote:
I have weird problem. Using RedHat9 X4.3 takes
too much time
to start-up. Using the same
-Original Message-
From: kumar.s [mailto:[EMAIL PROTECTED]
Sent: Sunday, October 26, 2003 04:18 PM
To: [EMAIL PROTECTED]
Subject: FW: reporting a problem related to a server crash
-Original Message-
From: kumar.s [mailto:[EMAIL PROTECTED]
Sent: Sunday, October 26, 2003 11:27
Hi,
You probably just need to make sure you have Unix domain sockets support
in the kernel. It's in the Networking section. Specificially, the .config
file in your /kernel/source_dir/ should have this line:
CONFIG_UNIX=y
Jesse
On Mon, 27 Oct 2003, alex wrote:
Good day!
I have a problem.
- Original Message -
From:
Asm-C-DrScheme-Math-Electronics
To: [EMAIL PROTECTED]
Sent: Sunday, October 26, 2003 2:04
PM
Subject: How to Config ECS K7SOM+ 7.5c
Mboard w/SiS 740 Chipset
I just installed SuSE 8.2 w/Athlon
optimized kernel and found,
[Please note that I'm not subscribed to the list, so please CC: me on
any replies. Thanks.]
Hello,
I've recently been working with an HD-2000 digital tuner card from
pcHDTV to receive terrestrial HDTV in the USA. Because the video
resolutions used for this content are very large (commonly
I have my third monitor working now with the GLINT driver but I've noticed a
strange screen corruption bug. It seems often i end up with purple bits on the
screen. It seems to be due to some specific optimization as it affects
specific areas of specific windows repeatably. And it seems to be
I upgraded to XFree86 4.3.0 following instructions from
your web site. However I still get the following message when I use:
startx
The Error message:
XFree86 Version 4.3.0
Release Date: 27 February
2003
X Protocol Version 11, Revision 0, Release
6.6
Build Operating
Hi !
I can't start X-server (startx). I have Graphic Card - NVidia
Tiva TNT
At first I have error like this:
Fatal serwer error: no screens found.
then after manual configuring :
Fatal error: Module load failure
---
PORNOGRAFIA. Polski kandydat do
I am trying to just build and install some documentation and manual pages
without having to do complete builds (like without make World).
But my man pages are not getting pre-processed. For example, information
like __miscmansuffix__, __projectroot__, and __vendorversion__ are not
replaced.
I
Hy, my name is Daniel.When i try opening my X server
using startx, i get the following problem...this is
the XFree86.0.log:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8)
/ X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the
Hy, my name is Daniel.When i try opening my X server
using startx, i get the following problem...this is
the XFree86.0.log:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8)
/ X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the
Thanks very much my system is now working in graphics cool. I changed from
the nvidia driver to nv driver. Cheers.
I have NVidia FX 5200 with Gnr F153 tft monitor on an AMD system and it
works! The joy of graphics , no more web in text mode.
Thanks very much,
Brian.
- Original Message
You need to configure the X server. The easiest way may be to use a
distribution specific configuration utility, if one is available for your
distro. If not, try 'xf86config'.
Jesse
On Mon, 27 Oct 2003, Abeysekera, Varuni S wrote:
I upgraded to XFree86 4.3.0 following instructions from your
kumar.s wrote:
-Original Message-
From: kumar.s [mailto:[EMAIL PROTECTED]
Sent: Sunday, October 26, 2003 04:18 PM
To: [EMAIL PROTECTED]
Subject: FW: reporting a problem related to a server crash
-Original Message-
From: kumar.s [mailto:[EMAIL PROTECTED]
Sent: Sunday, October 26,
RUSSELL ADAMS
Centre de soutien multi-clients de Montréal - Montreal Shared HelpDesk
IBM Canada Ltee
275 Viger E., Montréal (Qc.) Canada
Tel. : (514) 906-4513 ext. : 50068
Fax. : (514) 394-8922
[EMAIL PROTECTED]
___
XFree86 mailing list
[EMAIL
On Mon, 27 Oct 2003, Jeremy C. Reed wrote:
But my man pages are not getting pre-processed. For example, information
like __miscmansuffix__, __projectroot__, and __vendorversion__ are not
replaced.
I was able to make this work by making sure my host.def file was copied
into the directories I
[EMAIL PROTECTED] wrote:
On Tue, 21 Oct 2003, Solomon I. Shorser wrote:
1) If your motherboard's AGP chipset does not have kernel agpgart
support, or if it is experimental and requires the kernel
agp_unsupported=1 commandline option. In this case, it is
your
This is a common Debian problem. Remove Option UseFBDev
from the /etc/X11/XF86Config-4 file. You do not have a framebuffer
device.
Mark.
On Mon, 27 Oct 2003, [ISO-8859-2] Adam Jod³owski wrote:
Hi !
I can't start X-server (startx). I have Graphic Card - NVidia
Hello:
I have installed nVidia driver 1.0-4496 on my system, with Redhat 9.0 kernel
2.4.20-6 and XFree86 4.3.0-2, for an ASUS V9560VS (nVidia FX5600) card.
The driver was installed to nVidia's README, by-the-book. All requisite
libraries now appear in their designated locations.
XF86Config
NVIDIA's drivers replace XFree86's libGL and GLX module. You
need to uninstall NVIDIA's drivers to get OpenGL working with the
nv driver. Or at least restore XFree86's OpenGL libraries and GLX
module. For GLX it's merely a matter of removing NVIDIA's
attachment: 2[1].jpg
On Sun, Oct 26, 2003 at 09:59:20PM -0500, David Dawes wrote:
The server that hosts the XFree86 anoncvs, ftp, and cvsweb services died
on Saturday morning. Most other services, like the mailing lists and
the web site, should be unaffected.
These services are now restored, thanks to the folks at
I've talked to quite a few people that have had problems getting
dualhead to work on radeon IGP chips. Specifically, the crt port seems
to go into powersave mode when dualhead is enabled. I talked to Hui Yu
at ATI about the problem and he hasn't seen it on his IGP boards using
the lastest code
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/10/27 12:51:16
Log message:
sysctlbyname() is no longer used by drmOpen(). So it's not needed by
modules anymore. (Bugzilla #814, Eric Anholt).
Modified files:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/10/27 14:34:02
Log message:
Cygwin has strl{cat,cpy}() nowadays too.
Modified files:
xc/config/cf/:
cygwin.cf
Revision ChangesPath
3.56 +5 -1
Hi,
updated X from CVS an hour ago and started my build.
This is the failure log:
gcc -m32 -c -march=pentium4 -fno-strength-reduce -fomit-frame-pointer -O3
-pipe -ffast-math -march=pentium4 -Wall -ansi -pedantic -O3 -pipe
-ffast-math -I../../exports/include -I../../exports/include/freetype2
Hi
I want to start implementing the Siliconmotion chips into the XRandR
extension ...
Can someone point me to a chip which already supports this extension and
is able to rotate on the fly ??
I recieved the hardware specs and PCI registers from siliconmotion and i
am ready to spent time on
On Mon, Oct 27, 2003 at 02:12:26AM -0800, Andrew P. Lentvorski, Jr. wrote:
On Mon, 27 Oct 2003, Andrew C Aitchison wrote:
We have lost developers who might have been valuable to us by not giving
them CVS access. I'm afraid to say that from the outside it appears
that if David had been able
Hi !
Does anyone know if fast z-buffer clears and z-compression
aka hyper-z are going to be implemented in radeon DRI drivers (actually
it is in the radeon kernel module). It seems to be one of the
areas where major performance gain could be achieved, taking this driver to the
same
On Monday 27 October 2003 03:43 am, Andrew C Aitchison wrote:
The fact remains that there are developers out there who without CVS
access, who those who don't know the facts think could be making an
even bigger contribution if they did have access.
Nice post, but I couldn't parse the last
Hi,
my Radeon 7500 )OEM) reports a minimum dot clock of 20 MHz to the driver
while in reality it doesn't have a problem producing these dot clocks
(to e.g. drive a TV set). I have filed this at
http://bugs.xfree86.org/show_bug.cgi?id=831 and attached a patch to the
entry that implements an option
On Sun, Oct 26, 2003 at 09:59:20PM -0500, David Dawes wrote:
The server that hosts the XFree86 anoncvs, ftp, and cvsweb services died
on Saturday morning. Most other services, like the mailing lists and
the web site, should be unaffected.
These services are now restored, thanks to the folks at
RIC SIE
Tel (408)482-2840[EMAIL PROTECTED]
OBJECTIVE: STRUCTURAL MECHANICAL DESIGNER
CIVIL, ARCHITECTURAL, TRANSPORTATION, CAD Operator
EXPERIENCE:
89 - present
DESIGNER, ENGINEER, CAD MANAGER;
Engineering Design Service, Project Management Development.
Vahur Sinijarv wrote:
Does anyone know if fast z-buffer clears and 'z-compression aka hyper-z'
are going to be implemented in radeon DRI drivers (actually it is in the
'radeon' kernel module). It seems to be one of the areas where major
performance gain could be achieved, taking this driver to
It seems that David Dawes has made his decision not to let the
Cygwin/XFree86 project commit patches directly to the XFree86.org CVS
tree; he doesn't seem to want to go on record saying this, but he has
written several messages during this discussion about ftp servers, cvs
servers, etc., while
On Mon, Oct 27, 2003 at 11:35:20AM -0500, Harold L Hunt II wrote:
6) Alternatives are being evaluated for hosting Cygwin/XFree86 code in
CVS. Hosts that can provide CVS commit access for at least five
Cygwin/XFree86 developers will be given priority.
Harold,
I thought you already had the
Alan Hourihane wrote:
On Mon, Oct 27, 2003 at 11:35:20AM -0500, Harold L Hunt II wrote:
6) Alternatives are being evaluated for hosting Cygwin/XFree86 code in
CVS. Hosts that can provide CVS commit access for at least five
Cygwin/XFree86 developers will be given priority.
Harold,
I thought
I fear that my membership has not been too helpful. I'm just a newbie, and
Xfree86 is _way_ out of my league.
Therefore, I have unsubscribed.
If anyone wants me to get back on, please reply privately at
[EMAIL PROTECTED] (I am no longer listed at XFree86.org). If I
get requests to do so,
Raymond Jennings wrote:
I fear that my membership has not been too helpful. I'm just a
newbie, and Xfree86 is _way_ out of my league.
Therefore, I have unsubscribed.
If anyone wants me to get back on, please reply privately at
[EMAIL PROTECTED] (I am no longer listed at XFree86.org).
If I
there is a patch for support of the 731 in bugzilla:
http://bugs.xfree86.org/show_bug.cgi?id=754
No other drivers support roation in hardware at the moment, so it's up
to you to implement it from scratch I suspect. Keith Packard did much
of the work for xrandr for PDAs. You might want to look at
The following revision to
xc/extras/freetype2/builds/unix/freetype-config.in is XFree86
specific and not in the Freetype tree:
revision 1.2
date: 2003/05/05 16:12:27; author: dawes; state: Exp; lines: +29 -15
159. Make freetype-config more useful on NetBSD (#5693, Thomas Klausner).
cvs diff
I've talked to quite a few people that have had problems getting
dualhead to work on radeon IGP chips. Specifically, the crt port seems
to go into powersave mode when dualhead is enabled. I talked to Hui Yu
at ATI about the problem and he hasn't seen it on his IGP boards using
the lastest code
Harold L Hunt II wrote:
I tried a build without $(SMLIB) and $(ICELIB) in SharedXtReqs, but it
fails to link due to unresolved symbols (all symbols must be resolved at
library link time in DLLs on Windows).
I will have to consult with the rest of the Cygwin people to see what we
should do
Torrey Lyons wrote (in a message from Saturday 25)
The issue on Mac OS X is that most shared libraries want to be built
as two-level namespace images. Two-level namespace images have
significant advantages in loading speed, but they require that they
have no unresolved symbols when
On Sun, Oct 26, 2003 at 09:59:20PM -0500, David Dawes wrote:
The server that hosts the XFree86 anoncvs, ftp, and cvsweb services died
on Saturday morning. Most other services, like the mailing lists and
the web site, should be unaffected.
These services are now restored, thanks to the folks at
Hi,
I have got a notebook with a trackpad and 2 mouse buttons. The middle button
is emulated. I find it very inconvenient to press these 2 buttons at once.
But I have got the 2 windows buttons I have never used with linux.
Is it feasible to redefine the combination of pressing the
DATE: 27th of Oct, 03
FROM: THE DESK OF THE VICE PRESIDENT.
INTERNATIONAL PROMOTIONS/PRIZE AWARD..
REFERENCE: RSL/ 11504002/03: BATCH: 30/0020/LRP
CALLE GRAN VIA Nº. 72,
On Sun, Oct 26, 2003 at 09:59:20PM -0500, David Dawes wrote:
The server that hosts the XFree86 anoncvs, ftp, and cvsweb services died
on Saturday morning. Most other services, like the mailing lists and
the web site, should be unaffected.
These services are now restored, thanks to the folks at
51 matches
Mail list logo