Dear All,
I have downloaded the latest version of XFree86 (4.3.0.99.11), compiled and installed
it under Red Hat Linux 8.0. But now, I can not enter the graphic mode. My board is
Intel 845G, here is the log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: trans
hi,
i've just recently installed a RED HAT 8.0 LINUX distribution.
during the graphical setup my monitor, video card were both
detected perfectly (monitor probed as IBM E54 and video card
detected as INTEL 845 series).
however when the system reboots X cannot be initialised and
it falls
I copied all the binaries and subdirectories from XF86.org release 4.3 to a
cd (took about 2 hours).
copied Xinstall.sh (from the common subdirectory) to a temporary directory
under root (/root/jrmtemp).
ran: sh Xinstall.sh -check from that temporary directory.
Got an error message saying I
most
motherboards if not in bios there will be a jumper on
motherboard
a.out
is the result of a compile (gcc)
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of RobSent:
Thursday, 4 September 2003 7:24 AMTo:
[EMAIL PROTECTED]Cc:
[EMAIL PRO
On Wed, 3 Sep 2003, Rob wrote:
> "object format is a.out"
> "a.out no longer supported"
Whatever you were trying to run there, you've got the wrong
binaries. a.out is an old binary format used in the Linux 1.2
and earlier days.
Mark.
__
We're missing some context. That is an error that should never
happen and indicates broken X-server or module code. What were
you doing that caused that?
Mark.
On Tue, 2 Sep 2003, Rafael Spotto wrote:
> Somebody could help me about this log?
>
>
> ---
> Acabe
499Р
а з в и в а ю щ и е и г р у ш к
и о т782
123п
р о и з в о д и т е л я н а w
w w. b o m i k. r u367
440т
е л. (3 9 5 2) 4 4-4 8-9 0, 4 4-2 7-8 9491
1998 vintage pc with win98, dual boot to
Linux.
X would not work on this pc because: 1) 64m shared
ram (cpu and video), 2) mandrake min rqmts were 64m ram plus 2m ram on video
card. Original video is onboard SiS597/598. (Actually it's the
desktop application (gnome, kde, etc), it works,
Greetings,
This is my first post and my first experience with Xfree86. I downloaded
and compile Xfree86 for first time today. I made all steps and I don't get
any error during compiling process. I could install and then X server
start OK, no errors were reported in log file.
But no desktops s
Hi. I'm running CVS_head, at least as of yesterday morning. When I
run it, everything seems to start up just fine. I create an xterm and
twm lets me place it where I want. But ... when I give xterm the
focus, it sees none of my keystrokes. I can see shift keystrokes via
xev, and I have a keybo
On Thu, Sep 04, 2003 at 12:16:19AM +0200, Rene Rebe wrote:
>I there a better way to send patches? [EMAIL PROTECTED] seems to be a
>/dev/null target (mostly get lost) - and on this list I normally also
>do not get responses ...
[EMAIL PROTECTED] (aka [EMAIL PROTECTED]) is still monitored. There's
Somebody could help me about this log?
---
Acabe com aquelas janelinhas que pulam na sua tela.
AntiPop-up UOL - É grátis!
http://antipopup.uol.com.br
log
Description: Binary data
Hi,
On: Tue, 2 Sep 2003 19:16:13 -0400,
David Dawes <[EMAIL PROTECTED]> wrote:
> On Mon, Sep 01, 2003 at 09:26:27PM +0200, Rene Rebe wrote:
>
> >as mentioned weeks ago, current XFree CVS does not install a
> >fontconfig.pc anymore (it did up to 4.3.99.6 or so when the fontconfig
> >merge happ
On Wed, 3 Sep 2003, Alan Coopersmith wrote:
> jayjwa wrote:
> > Here is the situation: I've a friend in another state that I'd like to let
> > use my Xserver/clients (I don't even know if this is the right term for
> > this, basically, just to allow him to run the X-apps I have on my server
> > at
Go to console mode ( [Ctrl]+[Alt]+[f1] )
enter as root
and put "init 3" thats kill your X
them put "init 5" and "startx."
Marcel
>-- Mensaje Original --
>From: Lars Kerbler <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Reply-To: [EMAIL PROTECTED]
>Subject: [XFree86] kill the x server
>Date: Wed, 3 S
On Wed, 3 Sep 2003, James Cherry wrote:
> I'm no X-pert, but aren't AGP devices always on bus 1:0:0?
>
No, they aren't.
Mark.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
jayjwa+referer-news wrote:
Here is the situation: I've a friend in another state that I'd like to let
use my Xserver/clients (I don't even know if this is the right term for
this, basically, just to allow him to run the X-apps I have on my server
at his machine from his place, in another state.)
T
i have to kill my xserver, i dont know the name of the server because its
starts by system.
xkill -display asks for a display name,but i dont know it.
i´m using suse linux 8.2.
XFree86 -version:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
XFree86 Fans,
Here is the situation: I've a friend in another state that I'd like to let
use my Xserver/clients (I don't even know if this is the right term for
this, basically, just to allow him to run the X-apps I have on my server
at his machine from his place, in another state.) He is using so
I am getting an error
Fatal server error:
no screens found
When I try to run Mandarake Linux 9.0 in graphical
mode
Please help me in getting to know the solution for
this problem. I went to xfree86.org website but was
not able to identify which file to download...
There is a lot of confusio
I'm no X-pert, but aren't AGP devices always on bus 1:0:0?
I'd say you have more than one graphics device.. does your A7N8X have an integrated
nic or
something? I'd look it up but I'm too lazy.
--
James J. Cherry
Get your own "800" number
Voic
I am currently using version 4.2.0 and understand
that the latest 4.3.0 supports cards with the S3/TI3025, but not the TI3026
ramdac. Card is a diamond stealth 64 VRAM. What is the best way to proceed with
this card? Has anyone located a driver or way to work with the 3026
chip?
ESTE EMAIL É AUTOMÁTICO.
POR FAVOR, NÃO RESPONDA, POIS ELA NÃO SERÁ LIDA.
Não foi possível entregar a sua mensagem.
O destinatário não recebeu a sua mensagem. Veja a seguir a descrição do
motivo.
<[EMAIL PROTECTED]>:
A caixa postal do destinatário excedeu o limite de capacidade de armazenamento
Your mail to 'MacOSX-talk' with the subject
Re: Details
has been rejected for the following reason:
The email address <[EMAIL PROTECTED]> is not a member of this
list
and non-members are not allowed to post messages.
To post a message from this account please visit
http:
Hello!
You certaintly have seen this message before and ignored it. I know I did -
many times. However, please take a few moments to go through this letter.
I was amazed when the profit potential of this opportunity finally sunk
in...
With easy-to-use e-mail tools and approved e-mail, success in
Hi,
I just compiled 4.3.0 for my Alpha (RH Linux 6.1). When attempting to
start the server (after first running XFree86 -configure), I got a
server crash with signal 11. (Relevant files are attached.) Any hope
that this has an easy interpretation?
Many thanks,
Eric Henry
[EMAIL PROTECTED]
Sec
Hi-
I am stuck. I have downloaded Apple's X11 on my Powerbook (OSX). I am
using it to to run IDL, a graphics pkg/language. When I run a program that
generates a plot, a window is opened with the graph. However, the graph
starts on the right-hand side and finishes on the left (split in half).
Help!
On Wed, 3 Sep 2003, Miles Roper wrote:
> restest
> XResQueryExtension failed
>
If "X-Resource" doesn't show up in the list of extensions that
xdpyinfo prints out, your server doesn't have support for the
X Resource extension built in. I believe XFree86 4.3 and newer build
this by default (
*This is a product promotional e-mail. *
If you feel this is not useful, please delete it and kindly inform us
to remove your email address from
our record. We apologized for any inconveniences caused.
*
'NEW GENERA
Thank you for your inquiry regarding employment opportunities at Maxim
Pharmaceuticals.
We are carefully reviewing your qualifications for any current open
positions and we
will contact you directly if there is an appropriate match.
Once again, thank you for your interest in Maxim. We wish y
On Wed, 27 Aug 2003 [EMAIL PROTECTED] wrote:
> Date: Wed, 27 Aug 2003 13:54:26 +0100
> From: [EMAIL PROTECTED]
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: [OT] Viruses (was Re: [XFree86] unsubscribing.)
>
> I have heard it argued that Man is a virus...
>
> -Oli
>
H...
Hi, for me is impossible to use something different from
Vesa drivers, I don't understand the problem,
but is possible that XFree can't read configurations
availables from the video card.
I specify the environment :
Asus 5830
Pentium 4 2.8 Ghz
Mobility Radeon 9000 (rv or rt250) 64 MB video
Thank you for e-mailing [EMAIL PROTECTED] This is an auto generated message, please do
not respond to this mail.
If your email is concerning a presales or installation question regarding
InterClient, please create a case at
http://pso.borland.com/devsupport/WelcomePage.html.
If your email is
> So I like to know how do a job (init or whatever priviliged script it needs)
> choose one specific vt?? for the physical console.
Have a look at 'man chvt'.
achim
--
Achim FlammenkampForschungsschwerp. Mathematisierung Universität Bielefeld
UniversitätsstraBe 2533501 Bielefeld
Sir,
i have problem with X server, i am attaching the log
files, please help us to solve this problem
expecting a reply.
thanking you
manu
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
XFree86.0.l
please contact [EMAIL PROTECTED]
thank you.
THE UNCERTAINTY PRINCIPLE IS UNTENABLE
By re-analysing Heisenberg's Gamma-Ray Microscope experiment and the ideal experiment
from which the uncertainty principle is derived, it is actually found that the
uncertainty principle can not be obtained fro
Hi,
I am running two X Servers (Version: 4.2.99.3-20021230.4, and Intel 845G
graphics adapter) on my linux box (Kernel: 2.4.18-14) in different
screens. I am facing some problems related to power management.
My setup is like this: The first X Server is running without any window
manager and s
Eric J Bowser wrote:
Is ther a complete option list for radeon & mergedfb available
anywhere? There doesn't seem to be a man page...
The radeon MergedFB mode is identical to the SiS one. Quite a lot of
information about this mode can be found on
www.winischhofer.net/linuxsisvga.shtml
From what
Respected sir,
I am studying B.E(in IT) under Calcutta
University,Kolkata
In my PC had Red Hat-7.3. and then i have upgraded it
to RedHat-9.
Lastweek i was doing work in root envirnment and have
not shutdown my pc properly .Nexday when i have
started my pc in Linux environment i did not get
gr
39 matches
Mail list logo
