on a binary module,
unlike the MGA cards.
The Radeon 7500 should be the fastest. The 8500 should
work too, but I'm not entirely certain.br /
Does the 7500 support Xinerama mode across the two displays?
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence
xvinfo gives current xv status on the running system. Are you sure you
are running the mga driver?
--
Kevin
Zeeshan Ali wrote:
Hello,
Dont know, but i cant get XVideo going on my Matrox
MGA cards i am using the XFree86 thats shipped with
RedHat 7.3. maybe the drivers doesnt
://www.probo.com/timr/savage40.html
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
Alexey Dokuchaev wrote:
On Tue, Aug 20, 2002 at 06:45:34PM -0400, Kevin Brosius wrote:
Alexey Dokuchaev wrote:
Hi, Xperts!
I've build XFree86 4.2.0 from FreeBSD ports, nice and clean, however,
all I was able to get on my S3 Savage4 card is 640x480. This is kinda
more wordy than
this!) So, anything acquired after that date I consider only sharable
with people under an S3Graphics NDA, or those who signed an S3 NDA and
still consider it binding (xfree86.)
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http
always seems to
work.
The systems were both running FreeBSD and XFree86 4.2.1.
Any idea what might be going on here?
Thanks!
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED
. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org
if it is an older card, a Rage128,
or a Radeon and load those drivers, as well. So, for a Radeon card,
both modules should be updated.
Or maybe I'm just very confused!
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail
? Is the monitor
composite or separate sync? The modelines can be used to try all of
the flavors.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
and the KP- is on the ';' key.
NumLock is usually activated on the T30 with Shift-ScrLk, but I
found my default X keymap did not allow this, so I had to enter the
command:
xmodmap -e keycode 78 = Scroll_Lock NumLock
to set it up to match the markings.
R. Kevin Oberman, Network Engineer
Energy
in the Device section. Just remove the '#'.
This may not fix it, but it worked for him. (He has a 3 headed display
with a G450 and a Radeon 8500.)
Good luck!
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail
for the S3 968 and IBM 524/526.
-Toth
Ani Joshi is working on legacy S3 support. Several of the chipsets are
supported in xfree86 cvs, although I can't list which ones off the top
of my head.
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86
545C CB53
Public key: hkp:[EMAIL PROTECTED]7BD9 09C0 3AC1 6DF2
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED
Frank v Waveren wrote:
First of all, thanks for taking the time to help.
On Sun, Nov 03, 2002 at 10:27:52AM -0500, Kevin Brosius wrote:
Hmm, that's a rather cut down version of the log. Do you have a fully
copy posted somewhere we can download it?
Sure, forgot it might help
Frank v Waveren wrote:
On Sun, Nov 03, 2002 at 07:11:35PM -0500, Kevin Brosius wrote:
Have you tried depth 16 and a larger mode, say 800x600? Not that depth
8 shouldn't work, but I'm curious. Also, does your XF86Config file
contain a 'set_mclk' parameter (or variant with mclk
that
these are not set. I'd suggest trying to add the options:
HorizSync 10 - 12
VertRefresh 12 - 14
Option noddc
to your Monitor section in the config file. You must change the numbers
to match the monitor you have installed.
--
Kevin
Jørn Christensen wrote:
Hi
Let me know when you
With vesa or s3virge? It isn't going to help on vesa.
Jørn Christensen wrote:
Just tried that... same result...
(Asumed that Horisync was in khz and VertRefresh was in hz)
~Jørn Christensen
On Sat, 2002-11-09 at 13:39, Kevin Brosius wrote:
No, I don't believe the Trio3d hardware
with minimal knowledge of APM.)
Hope this helps, and I'd love to find a real fix for the problem.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
on
request.
A full log would be helpful. I've seen a case where missing monitor
config and failing DDC caused something like this.
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
for
me.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
___
Xpert mailing list
[EMAIL PROTECTED]
http
From: Kevin E Martin [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Date: Wed, 20 Nov 2002 10:05:16 -0500
On Wed, Nov 20, 2002 at 06:15:06AM -0800, Kevin Oberman wrote:
From: Andrew P. Lentvorski [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Date: Tue, 19 Nov 2002 19:00:17 -0800 (PST
[EMAIL PROTECTED] wrote:
Kevin Brosius wrote:
[EMAIL PROTECTED] wrote:
Having just upgraded my system from Mandrake 7.2 running the original
XFree86 4.1.0 binaries to the XFree86 4.2.0 provided with Mandrake 8.2
(/
partition was reformatted for this upgrade) I now have a visual
[EMAIL PROTECTED] wrote:
Kevin Brosius wrote:
[EMAIL PROTECTED] wrote:
Kevin Brosius wrote:
[EMAIL PROTECTED] wrote:
Having just upgraded my system from Mandrake 7.2 running the
original XFree86 4.1.0 binaries to the XFree86 4.2.0 provided
with Mandrake 8.2
the problem. It seems
independent of brand, though, so it really requires some special tweak
beyond what other graphics cards require.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED
recently.
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
got rid of my host.def so that I didn't have
any stale configuration around. I still can't do any CTRL-ALT-XXX.
I ran into a user on irc saying he couldn't switch VT's and pointed him
to this mail thread. I've built but haven't yet installed recent cvs,
so can't say myself.
--
Kevin
by' and
'Built by.' ATI's driver and software strategy is firmly based on
responsiveness and we greatly appreciate the feedback our Linux users
have provided. Please use http://apps.ati.com/linuxDfeedback/ for a
direct feedback line to ATI.
Thanks again for the feedback.
R. Kevin Oberman, Network Engineer
problems, but it took care of mine very well.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
___
Xpert
to get things working, but only very rarely.
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: [EMAIL PROTECTED] Phone: +1 510 486-8634
___
Xpert
is a
Savage3d with Tv out...).
Any hint?
Thanks.
PS: thanks to Kevin Brosius for the quick response.
Well, then we ought to be able to integrate some pieces of s3switch into
the s3virge driver.
Does it display on just the tv-out or on 2 displays at once? Are the
images the same?
--
Kevin
as PCI_CHIP_RADEON_LY
(http://cvsweb.xfree86.org/cvsweb/xc/programs/Xserver/hw/xfree86/common/xf86PciInfo.h?rev=1.138content-type=text/x-cvsweb-markup)
so may be usable on that machine. I don't know if the driver supports
though.
--
Kevin
___
Xpert
in a while. I'm planning to
do some updating of the driver in the not to distant future. I'll make
a note to take a look.
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
there.
--
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 02/09/18 11:15:00
Log message:
330. Fix problem where DRIUnlock was called when DRI fails to load
(Kevin Martin)
329. Fix erroneous warnings about removing DRM signal handler when DRI
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 02/10/11 18:38:08
Log message:
390. Rewrite Radeon DDC/DFP mode detection and management (Kevin Martin).
389. Integrate ATI patch:
- Add 2D support for Radeon 9000 (RV250), Mobility M9 (RV250
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/01/17 11:54:04
Log message:
751. Fix for Mono8x8 patterns on Radeon (#A.1520, Juergen Keil, Kevin Martin).
750. Fix for Radeon mode validation (#A.1330, #A.1380, #A.1393, #A.1522,
#A.1523, Wayne
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/01/18 16:45:15
Log message:
757. Fix typo in Radeon Mono8x8 code (#A.1526, Juergen Keil).
Modified files:
xc/programs/Xserver/hw/xfree86/:
CHANGELOG
it
(Kevin Martin).
802. Fix 2D corruption around 3D window, when 3D window is moving and using
Radeon page flipping code (Michel Dänzer).
801. Big endian fixes for Rage 128 and Radeon video and Radeon cursor code
(Michel Dänzer).
800. Enable PCI GART for all
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/02/07 12:41:16
Log message:
858. Update Rage 128 and Radeon PCI IDs (Mike Harris).
Modified files:
xc/programs/Xserver/hw/xfree86/:
CHANGELOG
xc/programs/Xserver/hw/xfree86/common/:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/02/21 13:44:23
Log message:
938. Fix adding FP native mode for Radeon (Hui [EMAIL PROTECTED], Kevin Martin).
937. Initialize I2C when primary head has an invalid DDC type for the
Radeon driver
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/07/02 10:31:31
Log message:
274. Do not drop HV sync during screen blanking for Radeon
(Bugzilla #320, Michael Breuer, Hui [EMAIL PROTECTED]).
273. Let out-of-limit pixel clocks only use the
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/10/07 15:47:13
Log message:
478. Radeon driver fixes (Hui [EMAIL PROTECTED])
- 9200 DVI fix and TMDS_PLL initialization for all chips
- New chips support (9800XT/SE, 9600XT/SE, M11, T2/X2
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/11/18 18:08:16
Log message:
602. Fix ForcePCIMode option to work as advertised in Radeon driver
(Bugzilla #850, Kevin Martin).
Modified files:
xc/programs/Xserver/hw/xfree86
generation (Kevin Martin and Rik Faith).
Modified files:
xc/lib/font/fontfile/:
renderers.c
xc/programs/Xserver/hw/xfree86/:
CHANGELOG
Revision ChangesPath
1.8 +2 -2 xc/lib/font/fontfile/renderers.c
3.3082+3 -1 xc/programs
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/02/25 20:25:32
Log message:
821. Fix Radeon secondary head register initialization (Hui [EMAIL PROTECTED],
Benjamin Herrenschmidt).
Modified files:
xc/programs/Xserver/hw/xfree86/:
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:07:59
xc/doc/man/DMX
Update of /home/x-cvs/xc/doc/man/DMX
In directory public.xfree86.org:/var/tmp/cvs-serv93917/doc/man/DMX
Log Message:
Directory /home/x-cvs/xc/doc/man/DMX
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:07:59
xc/lib/dmx
Update of /home/x-cvs/xc/lib/dmx
In directory public.xfree86.org:/var/tmp/cvs-serv93917/lib/dmx
Log Message:
Directory /home/x-cvs/xc/lib/dmx added to the
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:08:00
xc/programs/Xserver/hw/dmx
Update of /home/x-cvs/xc/programs/Xserver/hw/dmx
In directory public.xfree86.org:/var/tmp/cvs-serv93917/programs/Xserver/hw/dmx
Log Message:
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:09:09
xc/programs/Xserver/hw/dmx/input
Update of /home/x-cvs/xc/programs/Xserver/hw/dmx/input
In directory public.xfree86.org:/var/tmp/cvs-serv94023/input
Log Message:
Directory
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:08:58
xc/programs/Xserver/hw/dmx/config
Update of /home/x-cvs/xc/programs/Xserver/hw/dmx/config
In directory public.xfree86.org:/var/tmp/cvs-serv94023/config
Log Message:
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:09:00
xc/programs/Xserver/hw/dmx/doc
Update of /home/x-cvs/xc/programs/Xserver/hw/dmx/doc
In directory public.xfree86.org:/var/tmp/cvs-serv94023/doc
Log Message:
Directory
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:09:02
xc/programs/Xserver/hw/dmx/examples
Update of /home/x-cvs/xc/programs/Xserver/hw/dmx/examples
In directory public.xfree86.org:/var/tmp/cvs-serv94023/examples
Log Message:
[EMAIL PROTECTED]
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:09:36
xc/programs/Xserver/hw/dmx/doc/html
Update of /home/x-cvs/xc/programs/Xserver/hw/dmx/doc/html
In directory public.xfree86.org:/var/tmp/cvs-serv94182/html
Log Message:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/06/30 13:21:47
Log message:
141. Add Distributed Multihead X (DMX) support (Kevin Martin and
Rik Faith).
Modified files:
xc/config/cf/:
README X11.tmpl sgi.cf xf86site.def xfree86
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/07/06 20:46:24
Log message:
144. Disable building DMX on OSs that have not been verified to build
correctly (Kevin Martin).
143. Fix DMX build when Xinerama is not enabled (Kevin Martin
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/07/17 13:41:00
Log message:
Revert change to MAXFORMATS to maintain binary compatibility
Modified files:
xc/programs/Xserver/include/:
misc.h
Revision ChangesPath
3.31
will automatically enable the HV sync signals when the screen
is unblanked after a mode switch. Both should be safe.
Are there others that have R128 laptops who could test this solution to
see if it works for them? I no longer have a R128 laptop.
Kevin
On Fri, Feb 27, 2004 at 05:07:38PM -0500, David Dawes wrote:
Does the patch at:
http://bugs.xfree86.org/show_bug.cgi?id=1221
look OK or too risky given that 4.4.0 is due out in a couple of days?
The patch does not look correct. I've CC'd Hui to see if he has any
ideas. I'll also try
:
http://dmx.sourceforge.net/
Kevin E. Martin and Rik Faith
___
Devel mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/devel
On Wed, Jun 23, 2004 at 11:20:09AM +0100, Dr Andrew C Aitchison wrote:
On Tue, 22 Jun 2004, Kevin E Martin wrote:
We would like to include DMX in the next XFree86 release.
7. Add DMX and GLX Proxy support to Xinerama
9. Add protocol and structures to support GLX Proxy (from SGI)
Does
On Wed, Jun 23, 2004 at 11:30:38AM -0700, Ian Romanick wrote:
Kevin E Martin wrote:
I think many of us would very much like to have hardware accelerated
indirect rendering, and from time to time there has been talk of adding
it to the DRI project. It's actually been on the to do list
On Sat, Jul 17, 2004 at 12:59:04PM -0700, Mark Vojkovich wrote:
DMX unconditionally changed MAXFORMATS in misc.h which modified
the ScreenRec and broke binary compatiblity.
This can be very easily changed back, which I have now done. In the
future, if you find other areas where the code has
On Fri, Aug 06, 2004 at 07:57:04AM -0600, Marc Aurele La France wrote:
Hi.
DMX introduced a fair amount of source code duplication. In particular, its
GLX proxy seems to be based on older snapshots of GLX friends.
Now, I've already addressed some of the simplest aspects of this. But, at
On Tue, Jan 11, 2005 at 12:41:15PM -0500, David Dawes wrote:
On Tue, Jan 11, 2005 at 08:31:54AM -0700, Marc Aurele La France wrote:
On Sat, 8 Jan 2005, David Dawes wrote:
The schedule for the next XFree86 release -- 4.5.0 is as follows:
26 January 2005feature freeze
late
On Tue, Jan 11, 2005 at 02:15:58PM -0700, Marc Aurele La France wrote:
On Tue, 11 Jan 2005, Marc Aurele La France wrote:
On Tue, 11 Jan 2005, Kevin E Martin wrote:
Here's an explanation of the issue with a proposed fix to maintain
backward compatibility:
http://sourceforge.net
confirmation that I am on the right track. Can anyone see any obvious
errors in what I have done so far? Do I have to link something to the .o
file or anything?
Thanks in advance,
Kevin-John Beasley
___
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe
Teres Alexis, Alan Previn wrote:
I am a newby myself.. so I dont know if this is correct... if you're using
runlevel 5 where the kdm X login manager handles the login, then u can
change the login manager by editting the /etc/inittab file. In that file,
there is a section that looks like
your right, of course, how do I change the drivers. I'm telling you,
I'm new at this. Would these be the drivers in /usr/lib/??
type glxinfo and you will find out that you are using the
Mesa GL driver and not the X GL driver.
___
Newbie mailing
Hello,
I'm trying to set up my linux box with two monitors, and need a pci
graphics card,and an agp. I would like 3d apps to run well on each.
What's the best cards, and setup for this?
Thanks
Jeremy West
___
Newbie mailing list
[EMAIL PROTECTED]
if I've misinterpreted
the rule. I'm trying to put it in it's simplest terms so as to minimize
confusion.
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
still working on merging in some of my Radeon changes, so I
handle checking it in. Also, I'd like to hear from others if this works
for their cards (i.e., Keith's second question above). I just saw Andrew
Aitchison's post (ATI Radeon VE QY, aka Radeon 7000). Any others?
Thanks!
Kevin
..I'll submit it to DRI folks so merging with XFree86
will be easier.
Or should I wait for Kevin to submit more radeon changes to XFree86 CVS?
What's the ETA on that?
Hopefully this weekend. There are still a few things I'm working out in
the patch.
Kevin
.
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
get some feedback on how it works for others with both desktop
and laptop Radeons. I'll start working on the other patches that have
been sent in shortly.
Thanks,
Kevin
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Fri, Jul 12, 2002 at 03:25:09PM -0400, Ivan Raikov wrote:
Is there any way for me to obtain a copy of this patch? Or at
least a list of directories it updates, so that I can use 'cvs diff'
to update my copy of XFree86, instead of downloading or diff-ing the
entire source tree?
All
FWIW, I think this is a good debate to have here. Every year or so, we
have this discussion, and almost always something good comes from it.
Hopefully, these discussions can be lifted out of the accusations and
personal attacks that they sometimes degenerates into.
IMHO, I do not think XFree86
We're going to have an XFree86 Birds of a Feather session next week at
SIGGRAPH in San Antonio, TX. All are welcome to attend. Come meet some
of the developers, talk to other users, and find out what everyone is
doing!
Where: Marriott Rivercenter, Conference Room 16
When: Tuesday (23 Jul
On Tue, Jul 16, 2002 at 07:01:12PM -0400, Prasad, Ragini wrote:
By any chance, is any such thing held in the bayarea, CA?
SIGGRAPH is being held this year in San Antonio, TX and next year in San
Diego, CA. I'm hopeful this BOF session will be an annual event.
There are other conferences in
that the Radeon driver seems to have gone through a significant
rewrite (correct me if I'm wrong)
That's exaggerated. There have been large changes both by ATI and Kevin
E. Martin (the driver maintainer), but nowhere near a rewrite.
Definitely not a rewrite, but several very large changes have
Thanks for finding this problem. I have checked in the changes to
radeon_reg.h to add this register.
BTW, I only have x86 test machines, so I would be very interested to
hear if there are any other problems with this patch.
Thanks,
Kevin
On Fri, Sep 20, 2002 at 06:36:59AM -0700, Miles Lane
On Fri, Sep 20, 2002 at 01:09:31PM +0200, Alexander Stohr wrote:
As far as i have read on the list in a posting from hy0
there was a patch against XFree86 development branch that
made it into the CVS. This might add support new ATI chipsets.
Hui's patch does add support for new ATI chips,
I've just checked in the latest patch from ATI. Here's the CHANGELOG
entry:
390. Rewrite Radeon DDC/DFP mode detection and management (Kevin Martin).
389. Integrate ATI patch:
- Add 2D support for Radeon 9000 (RV250), Mobility M9 (RV250 mobile)
and Radeon 9700 (R300
was probably one of the last people working actively on the r128
driver, but I no longer have any Rage128 hardware. I think Kevin E.
Martin maintains the driver.
I'm mildly worried, if r128 is moving towards unsupported.
It's not moving towards unsupported. It's still on my supported list
I have been able to reproduce this problem on a DFP with a Radeon VE.
I'll be looking into the problem and let you know what I find.
Kevin
On Sun, Oct 27, 2002 at 02:01:09PM +0100, Christof Ameye wrote:
I can confirm: I have the same problem with my Radeon 8500 DVI output to
my 18 LCD. If I
problem occurred on both the Rage 128 and Radeon.
I've checking in the changes to the DRI tree and will check them into
the XFree86 tree with my next set of fixes. If you find other problems,
please post them here and I'll take a look.
Kevin
___
Xpert mailing
On Wed, Nov 20, 2002 at 06:15:06AM -0800, Kevin Oberman wrote:
From: Andrew P. Lentvorski [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Date: Tue, 19 Nov 2002 19:00:17 -0800 (PST)
I have a Radeon VE and was having problems with the dragging. Most
notably, dragging elements in Matlab
improved in current CVS, Mark's linetest
program still produces some artifacts. Kevin, have you gotten around to
look into that yet?
Yes. I rebuilt from the latest CVS tree, and ran xtest and Mark's
linetest program. It all worked fine for me -- i.e., no artifacts.
The latest I've heard
On Mon, Nov 25, 2002 at 12:02:32AM +0100, Michel Dänzer wrote:
On Son, 2002-11-24 at 22:53, Kevin E Martin wrote:
On Sun, Nov 24, 2002 at 09:57:36PM +0100, Michel Dänzer wrote:
On Don, 2002-11-21 at 06:44, Andrew P. Lentvorski wrote:
Okay, you wanted isolation; you got isolation
On Tue, Nov 26, 2002 at 01:45:17AM +0100, Michel Dänzer wrote:
On Mon, 2002-11-25 at 02:57, Kevin E Martin wrote:
Yes, I remember that e-mail conversation, but I believe the problem you
pointed out two months ago is a different problem and is specific to
Radeon 7500 (RV200) and later cards
201 - 289 of 289 matches
Mail list logo
