discovered that there is an X-server
specifically for Permedia 2 video cards. I installed this server and
everything worked!
Thanks again,
Larry
Jan Rubbrecht wrote:
It could be, you can always check which files you should have for the
glint driver to work.
Via google.com you should find plenty
and config files.
Thanks for any ideas,
Larry Watkins
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page
Beats me what is happening. X was working
fine last night but I get up this morning and I can't get it to start.
Here is the log. Hopefully you can point me in the right
direction.
XFree86.0.log
Description: Binary data
_
Find high-speed net deals comparison-shop your local providers here.
https://broadband.msn.com
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
I installed linux slackware 9.1 with X version 4.3.0
and when I run some apps that require this extension
I get the error: Xlib: extension SHAPE missing on display :0.0
I have been using X for almost 10 years and have never run
into this error. Is there anything I can do short of reinstalling
X
Man I just love it when things are simple like that.
That did it, Thanks a lot.
In the XF86Config file, Section Module, add:
Load extmod
Mark.
On Tue, 20 Jan 2004, Larry wrote:
I installed linux slackware 9.1 with X version 4.3.0
and when I run some apps
I have nvidia nforce graphics integrated into a chaintech motherboard. I
ended up using vesa and everything has worked great--good luck Larryk
From: hanasaki [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: xfree86 [EMAIL PROTECTED]
Subject: [XFree86] Howto? ATI Radeon on xfree 4.2 and debian
david---I tried about every possible option to get the xserver going. I know
that vidio chip is listed but I always got fatal server error. Using
xf86config on server options specify Custom then vesa. You dont list what
your monitor is but you cant test your options until you get your Xserver
This is only to pass on info regarding CHAINTECH SUMMIT motherboard with
integrated nvidia nforse video chip and how they work with 9.0 Mandrake.
They work great. Great definition and clarity. On first attempt to
configure
X Server Monitor and Resolution I played with all these settings and
been
using is the Custom setting for the Video Card. I might be getting the X
server going but I am only
able to get a half screen.
Any suggestion would be appreciated
thanks
Larry Kelly
[EMAIL PROTECTED]
_
Need a shot of Hank
on mandrake 9.1 your video card is listed. on xf86config you are given the
option to choose your card
larryk
From: Arun M. Chamikutty [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [XFree86] Video Card / Driver (S3 Trio 64 V2 / GX) for RedHat
Advanced Server 2.1
in, it will usually kill X and any programs I have running as well.
Any help is greatly appreciated.
thanks,
larry
You may also want to
remove the matrox hal module.
do you mean /usr/X11R6/lib/modules/drivers/mga_hal_drv.o?
-configure or manually edit your
config file.
Alex
Attached is the /var/log/XFree86.0 and the last XF86Config I'm using. Someone said that they read that the card I'm using only works properly at a DefaultDepth of 16, so I changed all that too.
I really appreciate your help.
larry
XFree86 Version
everything works fine - with ONE monitor.
thanks for your help. what should i do now???
larry
larry canonga [EMAIL PROTECTED] wrote:
I have a dell inspiron 4000 with Ati Rage 128 mobility video card, I can't run xserver, I attach the xfree86 log file, I appreciate any help, I'm new to linux and I Would like To understand it, I think the error is on the config of the video card, I'm
I have a dell inspiron 4000 with Ati Rage 128 mobility video card, I can't run xserver, I attach the xfree86 log file, I appreciate any help, I'm new to linux and I Would like To understand it, I think the error is on the config of the video card, I'm running the latest xfree86 4.3.0
ThanksDo You
Where can I get the source for xset? I've looked all over the web site and
can't find anything but the sources for X, which I really don't need.
What I would really like is the code to blank and unblank the screen much like
the xset program sets up. I want to add the blanking and unblanking to
Well, I'm giving up. I'm sure now that Lionel Lecoq was right in so far as he noticed
that
I'm using 3.3.6 X server with a 4.x.x driver. I don't know how to force the using of
the
XFree86 X server.
I re-installed Red Hat 7.0 and every thing is fine. I upgraded to RH 7.2 and the same
I've re-installed RedHat 7.2 three times trying to get rid of any pointers to XFree86
vers
3.x.x and still have the same problem running startx. It is extremely slow in loading.
At the
end of the install when I test the video card and its' resolution (1280x1024 24 bit),
it just
displays
Commenting out DRI didn't make any difference. Any other suggestions are welcome.
12/28/2001 5:08:35 PM, Ian P. Thomas [EMAIL PROTECTED] wrote:
On Friday 28 December 2001 07:48 pm, you wrote:
I've re-installed RedHat 7.2 three times trying to get rid of any
pointers to XFree86 vers 3.x.x and
: stripples.devel.redhat.com
Module loader present
I don't know what the hack would be. Also, I can only communicate using
windows XP so I have to enter everything in windows. This is why I
haven't attached any of the config files.
Regards. ... Larry
12/27/2001 2:33:33 AM, Lionel Lecoq [EMAIL PROTECTED
Now that I know how to transfer files between operating systems, I am attaching my
XF86Config-4 file as a windows text file. It is not very different from the one sent
to me by
Mr. Lecoq.
Any comments would be appreciated. Thank you.
12/27/2001 2:55:20 PM, Lionel Lecoq [EMAIL PROTECTED]
23 matches
Mail list logo
