On Friday 16 June 2006 16:20, Marc Aurele La France wrote:
On Thu, 15 Jun 2006, Nigel Henry wrote:
FC5 installs ok, but to start X, I have to change the r128 driver to vesa
in /etc/X11/xorg.conf.
I had similar problems with FC4 and the Cyberblade i1 card's Trident
driver, but after
) [0x806f511]
Fatal server error:
Caught signal 11. Server aborting
Any specific help would be really appreciated.
Nigel.
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
Hi,
I have a Dell Inspiron 1100 laptop that has the I845G card under 4.4.0 dri
worked nicely.
Im still using the i830 kernel drm module
With 4.5.0 i have the following in my xfree86.log
(II) I810(0): Allocated 64 kB for the scratch buffer at 0x7fea000
drmOpenDevice: node name is /dev/dri/card0
After looking at the log it seems that in 2 instancies the card / chipset
is mis-reported .. In that in the PCI scan the chipset is determined as a
Nvidia Geforce 256 but as an unknown type .. the nv module then fails with
unknown type for the card.
Id say you have 2 options 1 checkout to see if
unanimity,
How Vigras works. And you can better understand, what Vigras can do for you. If you
are sensible about your health, reflect on what you can do for your seual health, to
keep the chances that you will need Vigras as low as possible. sexist among smeared,
leafing.
Investors: Come see Wall Streets only scale-trading system for blue-chip stocks -
MainScale
We DO NOT TOUT INDIVIDUAL STOCKS - This is an automated, stock-trading system for
blue-chips only
www.mainscale4u.com/?032335
MainScale started on October 1, 2002
Here are the results our investors
Is XF86Config-4 sensitive to tabs, white space, ^M etc. We have a lot of
similar machines ( all using Nvidia) which we constantly change/rebuild the
OS, monitors etc. Sometimes on two identical machines one will work with the
XFconfigfile and the other won't. Seems that if the file is ftp'd in
Just upgraded my acer 630 laptop to redhat7.3. Loaded the XF86 server and
the NVIDIA drivers. System configured as a vesa driver and all works well
Ive included the vesa config . I have a nvidia geforce2 go . Used old
XFconfig file ( which worked on red7.2) and machine locks up during startx.
/listinfo/xfree86
I have a 'Logitech Cordless Trackman Optical' with 8 buttons (including
the two small ones either side of the scroll wheel, which also act as
scrollers). Which protocol should I use? At the moment I am using
IMPS/2 but this doesn't allow the use of all the 8 buttons.
Yours,
Nigel Ridley
these newer mice? Has anybody had any success in
configuring them?
Any help would be appreciated.
Yours,
Nigel Ridley.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
On 22 Mar 2003 16:53:23 +0100
Michel Dänzer [EMAIL PROTECTED] wrote:
On Sam, 2003-03-22 at 11:00, Nigel Ridley wrote:
I recently bought a 'Logitech Cordless Trackman Optical' which has 7
buttons plus a scroll wheel (which is clickable).
I left my XF86Config-4 as-was (see below
Blah just remembered, lower your Scan Range (Horizontal and Vertical
Scan Range)
Nigel
Tariq Husain wrote:
dear sir
I have a problem in intalling X windows on my new systme with Linux
8.0. The configuration of my PC is as follows :
Intel 845GLLY original Motherboard, Intel P 4 1.7 GHz, 256
I got a ATI Radeon 9700 Pro also, apparently it is supported in the
stable XFree86 4.3 which comes out on the 27th of February I think.
Christoph Ambichl wrote:
which version of xfree86 supports the ati radoen 9700 graphics board?
and is there a special version for suse linux 8.1?
thanks for
Hello all
Could some tell me when the ATI Radeon 9700 Pro will be support in
XFree86? or if there is any drivers for Freebsd so i could use it please.
Thank you
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Does anyone know when XFree86 4.3 will be released?
Thanks
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
15 matches
Mail list logo