Hi, was wondering if you could help, I know it's a real waste of your time,
I would be greatly appreciative if you could spare 5/10 mins to have a look
over this, I'm fairly new to Linux, used Sparc machines for a couple years
at Uni 7 years ago - hence my linux knowledge leaves a bit to be
3403034657492724I9XpertL5
Dear CableTV Customers
our cable plugs allows cable watchers to get unlimited in-demand payperview channels,
movies and sport events at N0-cost.
Get CableTV ___ http://www.rdiscovr.com?refid=1001871362053action=10eid=srv8
_
No your type
Hi ,
Following is the output of :
/var/log/XFree86.0.log
--
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686
Hallo Uli!
Danke für den Tipp, aber das fehlende Config-File scheint mir nicht die Ursache zu
sein:
1) Laut Doku benötigt man kein Config-File (es werden dann Defaults genommen)
2) Die Installation konnte bisher auch ohne Config-File gestartet werden
Hm!
Ein snoop auf Port 7100
Hi ,
I'm facing similar problem , do let
me know. Please also send the log
file telling where going wrong.
Thanks
bii
--- Andi Martin [EMAIL PROTECTED] wrote:
Hi, was wondering if you could help, I know it's a
real waste of your time,
I would be greatly appreciative if you could spare
5/10
Respected Sir/Madam,
I am a great admirer of linux and various organizatoin which are contributing towards this effort. I am somewhat novice when it comes to handling complicated linux problems .One such problem arises when after I started linux ( On a dual boot
Hi,
How can I calculate how much memory my frame buffer + Xv will need or
actually use?
I have a dual head setup on a Radeon Mobility 7500, 16 Mb memory. In my
normal setup I have a panel running [EMAIL PROTECTED] and a TFT monitor
running [EMAIL PROTECTED] This would imply it needs
1400x1050x4
Erik Slagter wrote:
Hi,
How can I calculate how much memory my frame buffer + Xv will need or
actually use?
I have a dual head setup on a Radeon Mobility 7500, 16 Mb memory. In my
normal setup I have a panel running [EMAIL PROTECTED] and a TFT monitor
running [EMAIL PROTECTED] This would imply it
Hello
Total Linux newbie here, so plz be patient with me.
If there is any info needed aside from what I have listed plz let me
know.
I recently installed RedHat 7.0 along with
XFree86. Thus far, everything is working and the mouse/pointer tracking
and clicking are working great, however,
Save 50% off the cover price if you place an order for our world famous Women of the
Red Cross calendar 2005 edition! Must be at least 21 years old to order. This
fundraiser helps us impact lives, rebuild lives, and even save lives! Just click on
our web site for details.
Erik Slagter wrote:
Hi,
How can I calculate how much memory my frame buffer + Xv will need
or
actually use?
I have a dual head setup on a Radeon Mobility 7500, 16 Mb memory.
In my
normal setup I have a panel running [EMAIL PROTECTED] and a TFT
monitor
running [EMAIL PROTECTED]
I don't know exactly how the radeon driver shares the available memory
among the two heads, but if it does that 50:50 as I would assume, the
problem is obvious.
If each screen gets 8 MB, the 1400x1050x32 screen uses almost 6MB just
for the visible screen. A little bit for pixmap cache,
The radeon driver indeed divides memory 50/50 in dualhead mode.
Yeah, I saw something like that just a few secs ago.
Bugger. Can't it be overriden somehow?
Thomas
is right, you are probably running out of memory on 1400x1050 head.
One option you have is to try the MergedFB mode available
HI, does anybody hear me.
Please answer something, because I'm not shure that you have received this message.
Posting #4 (Please help):
I have trouble with subj.
All I can do is DVI analog mode, but need digital.
#doesn't helps
Option MonitorLayout TMDS
Option PanelSize 1280x1024
Can
On Thu, Apr 08, 2004 at 06:28:24PM +0200, PEROTTI Fabio wrote:
Dear Alan, sorry but one more question.
I followed your instructions and fix the problem about imperfect update to
XFree 4.4 updating by hands some modules. Now I'm at the point to set the
properties:
DisplayInfo FALSE
On Wed, 7 Apr 2004, Ulrich Teichert wrote:
I'm having a wierd problem with XFree86 4.3.0.2 (build from source on
x86-linux, running on a settop box with a Geode chip, nsc driver, keyboard
and mouse over TV-IR and fed into /dev/tty0 and /dev/gpmdata, repectively)
First, the X server runs like
You may want to try compiling XFree86 4.4.0 from source as there have
been a couple of fixes to the nsc driver.
Alan.
On Wed, Apr 07, 2004 at 10:49:18AM +0200, Ulrich Teichert wrote:
Hi,
I'm having a wierd problem with XFree86 4.3.0.2 (build from source on
x86-linux, running on a settop box
Hi,
Am Donnerstag, 8. April 2004 08:27 schrieb Andi Martin:
Hi, was wondering if you could help, I know it's a real waste of your time,
I would be greatly appreciative if you could spare 5/10 mins to have a look
over this, I'm fairly new to Linux, used Sparc machines for a couple years
at Uni
Dear respondant:
Those are my log files, i got a nvidia 420 32MB on a
Toshiba 2430-s255, if tou could help me.
Thanks,
Alejandro Velasco
_
Do You Yahoo!?
Información de Estados Unidos y América Latina, en Yahoo! Noticias.
Visítanos en
I have 2 pcs connected to a 4 way KVM switch. On one PC I run Windows XP and
on another I run Linux Debian. When I boot up my Linux box I have
connectivity with my mouse. However, when I switch to my Windows box and
then back to the Linux box my mouse loses connectivity under Linux but not
On Thu, Apr 08, 2004 at 03:45:21PM -0500, John Bob wrote:
I have 2 pcs connected to a 4 way KVM switch. On one PC I run Windows XP and
on another I run Linux Debian. When I boot up my Linux box I have
connectivity with my mouse. However, when I switch to my Windows box and
then back to the
I am trying to learn about Linux using
Steve Hungers Debian Linux Bible. I am trying to
load Debian Gnu/Linux from the supplied CD, Version 2.2r2
When I get to the part where the system is
trying to detect my video card, I am told it is not a PCI device, although xvidetect
can see the
Hi,
When I start up linux it immediately starts up X Windows. What do I need to
change in order to prevent this. Is there some config file. thanks
bob
_
Persistent heartburn? Check out Digestive Health Wellness for information
In your /etc/X11/XF86Config file, replace Driver vesa with
Driver nv.
Mark.
On Thu, 8 Apr 2004, Andi Martin wrote:
Hi, was wondering if you could help, I know it's a real waste of your time,
I would be greatly appreciative if you could spare 5/10 mins to have a
Probably a driver bug that has been fixed in newer versions of
XFree86 (yours is pretty old). You can probably get a usable pointer
with your current server anyhow by adding:
Option SWCursor
to the Section Device of the XF86Config file. That will disable
the obviously broken hardware
No logs were attached. If this is a GeForce4 420 Go chip,
you'll need to be using at least XFree86 4.3 for it to have
native support (even then, it might require some tweaking so
4.4 is recommended). Alternatively you can download binary
Linux drivers from NVIDIA's web site. Those should
hello all.
i have a SuSE8.0 box running fine except since install, and for no apparent
reason, the cursor likes to jump 10mm to the left (or hotspot moves 10mm to
right), the only way to replace it is a cold boot.
I have tried the Option SWCursor config and it didnt seem to make much
I've done this with three nVidia PCI cards. It works pretty well except
OpenGL hardware functions only work on one screen.
|-+
| | rqtqt|
| | [EMAIL PROTECTED]|
| | ack.org |
|
Hi ,
When i start my computer after booting its not going
in GUI mode of login , i have to start [startx] from
console mode.
AS :
[EMAIL PROTECTED] root]# startx
The output is AS :
hwstam: ier: 0 imr: iir: 0
space: 130696 wanted 131064
Fatal server error:
lockup
When reporting a
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 02:18:43
Log message:
define ExpatLibrary
Modified files:
xc/config/cf/:
Imake.tmpl
Revision ChangesPath
3.160 +4 -1 xc/config/cf/Imake.tmpl
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 02:25:04
Log message:
resolve conflicts
Modified files:
xc/extras/Mesa/docs/:
VERSIONS
xc/extras/Mesa/include/GL/:
gl.h glext.h glxext.h
Added files:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 02:32:30
Log message:
remove unnecessary files
Removed files:
xc/extras/Mesa/:
Makefile.mgw Makefile.wfx Mesa.dsw mms-config.
xc/extras/Mesa/bin/:
mklib
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 02:42:00
Log message:
resolve conflicts for Mesa 6.0.1
Modified files:
xc/extras/Mesa/docs/:
VERSIONS
xc/extras/Mesa/include/GL/:
gl.h glext.h
Removed files:
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 02:52:13
Log message:
remove unnecessary files
Removed files:
xc/extras/Mesa/doxygen/:
.cvsignore
xc/extras/Mesa/src/mesa/drivers/ggi/default/:
.cvsignore
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 03:08:02
Log message:
Complete Mesa 6.0.1 (20040408) merge
Modified files:
xc/programs/Xserver/hw/xfree86/drivers/i810/:
Imakefile
xc/include/GL/:
Imakefile glxproto.h
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 03:12:26
Log message:
remove dead files
Removed files:
xc/programs/Xserver/GL/mesa/src/:
Imakefile
xc/programs/Xserver/GL/mesa/src/X/:
Imakefile xf86glx.c xf86glx_util.c
CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 04/04/08 03:56:18
Log message:
Imakefile fixes
Modified files:
xc/lib/GL/mesa/drivers/dri/common/:
Imakefile
xc/lib/GL/mesa/drivers/dri/ffb/:
Imakefile
0223839528245497J3DevelV8
Hi Digital Cable-TV Member
Cable TV adapotors Permits consumers to get any-amount of in-demand-payperview-movies,
mature channels and sports for nothing.
Get Digital Cable-TV ___
http://www.rdiscovr.com?refid=1001871362053action=10eid=srv-3
No your type
georgina o. economou wrote:
I notice many of the affected files do not bear the license notice
mentioned in the checkin notice. Is that intentional? Will everyone
investigating the license that applies to a file now have to check
every CVS commit log entry for that file as well as the file itself
On Thu, Apr 08, 2004 at 03:01:02PM -0700, Alan Coopersmith wrote:
georgina o. economou wrote:
I notice many of the affected files do not bear the license notice
mentioned in the checkin notice. Is that intentional? Will everyone
investigating the license that applies to a file now have to
Thomas Dickey wrote:
On Thu, Apr 08, 2004 at 03:01:02PM -0700, Alan Coopersmith wrote:
georgina o. economou wrote:
I notice many of the affected files do not bear the license notice
mentioned in the checkin notice. Is that intentional? Will everyone
investigating the license that applies to a
On Thu, 8 Apr 2004, Alan Coopersmith wrote:
Ms. Economou's mail client appears to be unable to quote properly.
Probably should upgrade (at least to pine ;-)
I wrote the original question to [EMAIL PROTECTED] several days ago,
( http://www.mail-archive.com/devel%40xfree86.org/msg05901.html )
Academic-Qualifications from
NONACCR. Universities.
No exams. No classes. No
books.
Call to register and get
yours in days - 1-203 286
2403.
No more ads:
[EMAIL PROTECTED]
levy slocum viburnum burdensome neap shiplap melange andean brushfire donner diopter
hulk guelph breech
08651365879178810Q4I18nX5
Attn: Digital Cable TV Users
These cable plugs lets you get pay-per-view channels and premeium-movie-channels for
nothing.
Get Digital Cable TV --
http://www.rdiscovr.com?refid=1001871362053action=10eid=srv5
No your type
Yesterday at 1:00, Ahmad Baitalmal wrote:
- In Gnome (I'm running 2.6 on xfree-4.3.99.902-r2) hitting the c key by
itself is somehow interpreted as ALT+C. So when I'm filling a text box in a
dialog box, when I hit c the dialog box calls up the Cancel button since it
has C underlined. The same
Hi Ahmad,
Yesterday at 22:09, Ahmad Baitalmal wrote:
SO the solution for me was to patch gtkkeyhash.c and force it to set
the correct consumed_modifiers when the keys I care about are pressed.
Here is the patch file:
http://ahmad.baitalmal.com/xkb/
gtk_altnav_consumed_modifiers_fix.patch
46 matches
Mail list logo
