On 10.08.2010 02:05, Alex Deucher wrote:
How about 800x600 or 1024x768? Also, are you using the analog or
digitial part of the DVI connector? If you are using the analog part,
it uses the same encoder as the DIN connector so you can only use one
or the other.
I'll check other modes today. Yes,
On Tue, Aug 10, 2010 at 3:06 AM, Sergej Pupykin m...@sergej.pp.ru wrote:
On 10.08.2010 02:05, Alex Deucher wrote:
How about 800x600 or 1024x768? Also, are you using the analog or
digitial part of the DVI connector? If you are using the analog part,
it uses the same encoder as the DIN
At Tue, 10 Aug 2010 12:26:41 -0400,
Alex Deucher alexdeuc...@gmail.com wrote:
That scenario is not supported and only happens to work by luck with
ums. Since the encoder is shared between the DIN port and the analog
portion of the DVI port, you can't really use them both at the same
time. It
On 10.08.2010 20:35, Sergej Pupykin wrote:
At Tue, 10 Aug 2010 12:26:41 -0400,
Alex Deucheralexdeuc...@gmail.com wrote:
That scenario is not supported and only happens to work by luck with
ums. Since the encoder is shared between the DIN port and the analog
portion of the DVI port, you can't
On Tue, Aug 10, 2010 at 5:59 PM, Sergej Pupykin m...@sergej.pp.ru wrote:
On 10.08.2010 20:35, Sergej Pupykin wrote:
At Tue, 10 Aug 2010 12:26:41 -0400,
Alex Deucheralexdeuc...@gmail.com wrote:
That scenario is not supported and only happens to work by luck with
ums. Since the encoder is
On 11.08.2010 02:06, Alex Deucher wrote:
File a bug (https://bugs.freedesktop.org) and attach your xorg log and
dmesg output.
Done: https://bugs.freedesktop.org/show_bug.cgi?id=29494
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
On Sat, Aug 7, 2010 at 4:25 AM, Sergej Pupykin m...@sergej.pp.ru wrote:
On 07.08.2010 05:23, Alex Deucher wrote:
On Fri, Aug 6, 2010 at 5:41 PM, Sergej Pupykinm...@sergej.pp.ru wrote:
Should I report bug, or it is known issue and it is needed to change
status
on wiki?
It should work in
On 09.08.2010 11:10, Alex Deucher wrote:
Does tv-out work with kms if you force it on with xrandr? load
detection, which is used for detection on tv-out, is not always
reliable.
Hello, Alex,
I try
$ xrandr --addmode DIN 640x480
$ xrandr --output DIN --crtc 0 --mode 640x480 --right-of DVI-0
$
On Mon, Aug 9, 2010 at 4:52 PM, Sergej Pupykin m...@sergej.pp.ru wrote:
On 09.08.2010 11:10, Alex Deucher wrote:
Does tv-out work with kms if you force it on with xrandr? load
detection, which is used for detection on tv-out, is not always
reliable.
Hello, Alex,
I try
$ xrandr
On Mon, Aug 9, 2010 at 4:52 PM, Sergej Pupykin m...@sergej.pp.ru wrote:
On 09.08.2010 11:10, Alex Deucher wrote:
Does tv-out work with kms if you force it on with xrandr? load
detection, which is used for detection on tv-out, is not always
reliable.
Hello, Alex,
I try
$ xrandr
On 07.08.2010 05:23, Alex Deucher wrote:
On Fri, Aug 6, 2010 at 5:41 PM, Sergej Pupykinm...@sergej.pp.ru wrote:
Should I report bug, or it is known issue and it is needed to change status
on wiki?
It should work in KMS as well. What kernel are you using? There were
some issues fixed in
Hello, All,
I checked
http://www.x.org/wiki/RadeonFeature
and
http://www.x.org/wiki/RadeonFeatureUMS
On both pages TV-out marked as done. But on my card it works only in UMS
mode. In KMS xrandr always reports
DIN disconnected (normal left inverted right x axis y axis)
tv standard:
On Fri, Aug 6, 2010 at 5:41 PM, Sergej Pupykin m...@sergej.pp.ru wrote:
Hello, All,
I checked
http://www.x.org/wiki/RadeonFeature
and
http://www.x.org/wiki/RadeonFeatureUMS
On both pages TV-out marked as done. But on my card it works only in UMS
mode. In KMS xrandr always reports
DIN
13 matches
Mail list logo
