Hi,
i use
Senao SUB-8301 USB WLAN module (AL7230B_RF rf chip)
Firmware: V1.1 (same V1.3)
Kernel: 2.6.18-rc2
zd1211rw git: 83c15ac14de7a01633c07e1c68226c73f9c92421 (old but works)
While sniffing the WLAN communication between the USB WLAN module and an
Access Point we found an extraordinary
Shu Hung (Koala) wrote:
Hello,
I'm using Planex GW-US54GZL
http://www.planex.net/product/wireless/gw-us54gzl.htm adapter on my
Ubuntu Dapper (6.06LTS). Although I want to upgrade to Ubuntu 6.10 or
later, the adapter does not work on those. It seems that after you
rewrote the driver for
Do any of the zd1211 based devices do 802.11a? All of the ones I can
locate are 11b/g only.
--
Jon Smirl
[EMAIL PROTECTED]
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and
Jon Smirl wrote:
Do any of the zd1211 based devices do 802.11a? All of the ones I can
locate are 11b/g only.
http://zd1211.ath.cx/wiki/RfTypes
-
Take Surveys. Earn Cash. Influence the Future of IT
Join
On 1/15/07, Daniel Drake [EMAIL PROTECTED] wrote:
Jon Smirl wrote:
Do any of the zd1211 based devices do 802.11a? All of the ones I can
locate are 11b/g only.
http://zd1211.ath.cx/wiki/RfTypes
Which Trendnet device is this referring to?
Airoha AL7230B - 802.11a/b/g ΒΆ
The AL7230B
On 1/15/07, Jon Smirl [EMAIL PROTECTED] wrote:
On 1/15/07, Daniel Drake [EMAIL PROTECTED] wrote:
Jon Smirl wrote:
Do any of the zd1211 based devices do 802.11a? All of the ones I can
locate are 11b/g only.
http://zd1211.ath.cx/wiki/RfTypes
Which Trendnet device is this referring
Hello all,
I`ve just registered, and i`ve googled and searched the list archives
but i haven`t found nothing about this error, i don`t even know if this is a
zd1211 or some usb problem.
I have the following problem: When I reboot with an Airlink 101
(0ace:1211) or Naxos device
Thats true - now it's called firmware.sh (I'm using udev v100), and udev is
placing it in /lib/udev/firmware.sh.
I'm not sure if this is absolutely necessary, but did you check if the
script's permissions allow it to be executed ?
Am 15.01.2007 um 14:59 schrieb Peter Lueg:
Frame WLAN Sequence=nRetry bit=0
Retry 1 WLAN Sequence=nRetry bit=1
Retry 2 WLAN Sequence=nRetry bit=1
Retry 3 WLAN Sequence=nRetry bit=1
Retry 4 WLAN Sequence=n+1 Retry bit=0 (Fault)
Retry 5
On 1/15/07, Uli Kunitz [EMAIL PROTECTED] wrote:
Jon,
I have a ALLSPOT USB WLAN Finder ALL0298, which should support
802.11a. I has the AL7230 chip.
Does it work on 11a? Is there doc and code for using the AL7230?
Kind regards,
Uli
--
Uli Kunitz
--
Jon Smirl
[EMAIL PROTECTED]
Hello,
using iwconfig I noticed that my network card generates a massive
number of Tx excessive retries
#iwconfig
...
Link Quality=80/100 Signal level=41/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:739
Tx excessive retries:432920
11 matches
Mail list logo