Giuseppe Lippolis wrote:
> Hi daniel,
> I had tried to use the vendor driver and it worked with zd1211b.
>
> So i modify the line in the kernel:
> { USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211B }
>
> and it has worked fine also in monitor mode.
Great!
Please provide the chip ID so
-
From: "Daniel Drake" <[EMAIL PROTECTED]>
To: "Giuseppe Lippolis" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, July 12, 2007 1:03 AM
Subject: Re: [zd1211-devs] problems on device 0cde:001a
> Giuseppe Lippolis wrote:
>> 00:37:02 kernel: [ 502.652000] SoftM
Giuseppe Lippolis wrote:
> 00:37:02 kernel: [ 502.652000] SoftMAC: Sent Authentication Request to
> 00:0f:3d:a6:fa:da.
> 00:37:02 kernel: [ 502.656000] SoftMAC: Open Authentication completed with
> 00:0f:3d:a6:fa:da
> 00:37:02 kernel: [ 502.656000] zd1211rw 4-1:1.0: set_channel() channel 1
> 0
0.592000] zd1211rw 4-1:1.0: zd_mac_get_channel()
channel 1
00:37:10 kernel: [ 510.592000] zd1211rw 4-1:1.0: iw_get_range()
- Original Message -
From: "Daniel Drake" <[EMAIL PROTECTED]>
To: "Giuseppe Lippolis" <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, J
Giuseppe Lippolis wrote:
> so i execute
> iwconfig eth1 essid ""
>
> an then iwconfig
> eth1 IEEE 802.11b/g ESSID:"" Nickname:"zd1211"
> Mode:Managed Frequency:2.412 GHz Access Point: 00:0F:3D:A6:FA:DA
> Bit Rate=1 Mb/s
> Encryption key:off
>
I buy a usb WiFi key whith id codes 0cde:001a
I rebuilt kernel 2.6.21.6
I modify zd_usb.c adding the line
{ USB_DEVICE(0x0cde, 0x001a), .driver_info = DEVICE_ZD1211 },
when the kernel boots i get :
dmesg | grep zd1211
[ 25.092000] zd1211rw usb_init()
[ 25.668000] zd1211rw 4-1:1.0: zd_netd
