I have ZyXEL AG-220, with ZD1211B chip and RF AL7230B, usb-id 0586:3412.
AL7230B is not supported with ZD1211B. I tried use as ZD1211 and scan works,
but association not (due to differences between ZD1211 and ZD1211B).
Is there any way to make AL7230B working with ZD1211B?
--
View this message
Daniel Drake wrote:
>
> Tomas Klas wrote:
>> I have ZyXEL AG-220, with ZD1211B chip and RF AL7230B, usb-id 0586:3412.
>> Is there any way to make AL7230B working with ZD1211B?
>
> I assume the above results were from zd1211rw. Can you confirm that the
> vend
Daniel Drake wrote:
>
> Daniel Drake wrote:
>> Please test this driver snapshot:
>> http://dsd.object4.net/zd1211rw-zd1211b-al7230b.tar.bz2
>>
>
> Missed a bit, please add the attached patch on top.
>
It works well. You may now add ZyXEL AG-220 to device list. (USB id
0586:3412)
http://www
Daniel Drake wrote:
>
> You can't build zd1211rw into the kernel at the moment. It tries to load
> the firmware before the filesystem is available, which fails for obvious
> reasons. You need to build it as a module.
>
> Daniel
>
Alternatively, it is possible to plug-in USB stick (or enable
I have some problem with USB-stick initialization. Sometimes initialization
looks ok, but device doesn't receive any packets. Scan can't find any
reachable APs.
I tried two sticks: ZyXEL AG-220 and ZyXEL G-202 and two APs (Linksys). My
hardware is Cirrus EP9315 processor (ARM920T) on experimental
code.
Tomas Klas
Kvetoslav BENDA wrote:
>
> Hi all,
> I have USB WLAN ZyXEL AG-220 (with RF AL7230B) witch support 802.11a
> feature, but driver zd1211rw not yet. I would like to know some
> information when driver will be supported this feature.
>
> I tryed drivers
Mayne wrote:
>
> Anyways, anyone apart from me running zd1211 on a USB 1.1 system? So far
> the two 1.1 systems I used both had problems with the stick (hiccups every
>
I had some problems with USB 1.1 on Cirrus EP9315 (ARM, OHCI). After some
experiments, I found some problems in writing to