Re: [zd1211-devs] Gigafast 1215 not working
Uli Kunitz wrote: > Could you send us a more complete log from plugging in the device > until the error happens? Here is it: --- /var/log/kern.log -- May 8 11:38:33 mybox kernel: usb 3-6: USB disconnect, address 3 May 8 11:43:45 mybox kernel: usb 3-6: new high speed USB device using ehci_hcd and address 4 May 8 11:43:45 mybox kernel: usb 3-6: configuration #1 chosen from 1 choice May 8 11:43:45 mybox kernel: zd1211rw usb_init() May 8 11:43:45 mybox kernel: usb 3-6: print_id() 0ace:1215 v4810 high May 8 11:43:45 mybox kernel: usb 3-6: reset high speed USB device using ehci_hcd and address 4 May 8 11:43:45 mybox kernel: zd1211rw 3-6:1.0: zd_netdev_alloc() netdev->flags 0x1002 May 8 11:43:45 mybox kernel: zd1211rw 3-6:1.0: zd_netdev_alloc() netdev->features 0x May 8 11:43:45 mybox kernel: usb 3-6: request_fw_file() fw name zd1211/zd1211b_ub May 8 11:43:45 mybox kernel: usb 3-6: upload_firmware() firmware device id 0x4810 is equal to the actual device id May 8 11:43:45 mybox kernel: usb 3-6: request_fw_file() fw name zd1211/zd1211b_uphr May 8 11:43:45 mybox kernel: usb 3-6: upload_code() transfer size 4096 May 8 11:43:46 mybox kernel: usb 3-6: upload_code() transfer size 1024 May 8 11:43:46 mybox kernel: usb 3-6: upload_code() firmware confirm return value 0x01 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_usb_enable_int() May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_usb_enable_int() submit urb f3ad5a40 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_chip_init_hw() May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_cr() CR_AFTER_PNP 0x May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_cr() CR_GPI_EN 0x May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_cr() CR_INTERRUPT 0x May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: read_fw_regs_offset() fw_regs_base: 0xf7f1 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: read_pod() E2P_POD 0x8504 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: read_pod() RF AL2230_RF 0x4 PA type 0x0 patch CCK 1 patch CR157 0 patch 6M 0 new PHY 1 link LED2 tx led 1 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: hw_init() May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd1211b_hw_reset_phy() May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_chip_lock_phy_regs() CR_REG1: 0x00 -> 0x00 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x00 -> 0x80 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd1211b_hw_init_hmac() May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: get_aw_pt_bi() aw 0 pt 0 bi 0 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: set_aw_pt_bi() aw 0 pt 99 bi 100 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: firmware version 4725 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_fw_registers() FW_FIRMWARE_VER 0x4725 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_fw_registers() FW_USB_SPEED 0x0001 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_fw_registers() FW_FIX_TX_RATE 0x May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_fw_registers() FW_LINK_STATUS 0x May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_cr() CR_AFTER_PNP 0x0001 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_cr() CR_GPI_EN 0x May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: dump_cr() CR_INTERRUPT 0x May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--N May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_write_mac_addr() mac addr 00:02:72:53:de:1f May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_read_regdomain() regdomain: 0x10 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: regdomain 0x10 May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: zd_usb_disable_int() urb f3ad5a40 killed May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: probe() successful May 8 11:43:46 mybox kernel: zd1211rw 3-6:1.0: eth2 May 8 11:43:46 mybox kernel: usbcore: registered new interface driver zd1211rw May 8 11:43:46 mybox kernel: zd1211rw initialized May 8 11:44:08 mybox kernel: zd1211rw 3-6:1.0: zd_mac_get_channel() channel 0 May 8 11:44:08 mybox kernel: zd1211rw 3-6:1.0: iw_get_range() May 8 11:44:17 mybox kernel: zd1211rw 3-6:1.0: zd_usb_enable_int() May 8 11:44:17 mybox kernel: zd1211rw 3-6:1.0: zd_usb_enable_int() submit urb f3ad56c0 May 8 11:44:17 mybox kernel: zd1211rw 3-6:1.0: zd_chip_set_basic_rates_locked() ff0f May 8 11:44:18 mybox kernel: zd1211rw 3-6:1.0: zd_usb_iowrite16v() error in usb_bulk_msg(). Error number -110 May 8 11:44:18 mybox kernel: zd1211rw 3-6:1.0: _zd_iowrite32v_locked() error -110 in zd_usb_write16v May 8 11:44:18 mybox kernel: zd1211rw 3-6:1.0: zd_usb_disable_int() urb f3ad56c0 killed - /var/log/messages --- May 8 11:38:33 mybox k
Re: [zd1211-devs] Gigafast 1215 not working
Am 07.05.2007 um 22:10 schrieb Daniel Drake: > Lucio Crusca wrote: >> Alle 19:19, lunedì 7 maggio 2007, Lucio Crusca ha scritto: >>> # ifconfig eth5 up >>> SIOCSIFFLAGS: Connection timeout >>> but this should be the first thing to do before doing anything >>> else. I'm >>> stuck. iwevent output is plain silence. >> >> I've forgotten the relevant kern.log >> >> May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: >> zd_usb_enable_int() >> May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: >> zd_usb_enable_int() submit urb f577e8c0 >> May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: >> zd_chip_set_basic_rates_locked() ff0f >> May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: >> zd_usb_iowrite16v() error in usb_bulk_msg(). Error number -110 >> May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: >> _zd_iowrite32v_locked() error -110 in zd_usb_write16v >> May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: >> zd_usb_disable_int() urb f577e8c0 killed > > Please file a bug for this at http://bugzilla.kernel.org It remembers me of the old device reinitialization problem, however this happens here after the firmware is loaded. We have mitigated the reinitialization problem, but it is still there and depends on certain combination of the ZD1211B firmware and the USB host adapter. Only replugging solves the problem. Could you send us a more complete log from plugging in the device until the error happens? Kind regards, Ulrich -- Uli Kunitz - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Daniel wrote: > Please file a bug for this at http://bugzilla.kernel.org Thank you very much indeed for the clarification. I've filed bug #8447, however I've realized that the bug is present only when using a 686 kernel on a Pentium4 hardware. Recompiling the kernel and having it Pentium4 optimized fixes the issue. > [...] > This is a rather strange script. If you're using wpa_supplicant you > don't need most of the above. Configure wpa_supplicant correctly, > manually wait until it has completed association, then configure your IP > and route info. Ok, however I suspect that, once the bug is fixed, we won't need any script either... Thanks again, Lucio. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Lucio Crusca wrote: > ifconfig $WLESS_IF up > iwconfig $WLESS_IF mode managed > iwconfig $WLESS_IF rate 2Mb > iwconfig $WLESS_IF essid "videokernel" > ifconfig $WLESS_IF 192.168.1.22 netmask 255.255.255.0 > route add default gw 192.168.1.1 dev $WLESS_IF > wpa_supplicant -Bw -c /etc/wpa_supplicant/wpa_supplicant.conf -i$WLESS_IF This is a rather strange script. If you're using wpa_supplicant you don't need most of the above. Configure wpa_supplicant correctly, manually wait until it has completed association, then configure your IP and route info. wpa_supplicant will handle bringing the interface up, associating, etc. Daniel - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Lucio Crusca wrote: > Alle 19:19, lunedì 7 maggio 2007, Lucio Crusca ha scritto: >> # ifconfig eth5 up >> SIOCSIFFLAGS: Connection timeout >> but this should be the first thing to do before doing anything else. I'm >> stuck. iwevent output is plain silence. > > I've forgotten the relevant kern.log > > May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > submit urb f577e8c0 > May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: > zd_chip_set_basic_rates_locked() ff0f > May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_iowrite16v() > error in usb_bulk_msg(). Error number -110 > May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: _zd_iowrite32v_locked() > error -110 in zd_usb_write16v > May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_disable_int() urb > f577e8c0 killed Please file a bug for this at http://bugzilla.kernel.org - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
I've dug a bit through the kernel sources. The timeout is set to one second (zd_usb.c) and it's being honoured like it should; the "time ifconfig eth5 up" command reports real0m1.004s So the reported error is the actual reason for the failure. The device is expected to reply to something within one second but in certain cases it doesn't. I don't know the driver and kernel internals enough to make more assumptions. However this timeout issue brings another strange behaviour I've observed sometimes at boot to my mind. It happens that when the kernel says: Waiting for /dev to be fully populated... the machine hangs for quite a long time (one minute or two), then it continues booting until it finally hangs forever (at least for more than 1 hour) on "Discovering new hardware". This happens only when the adapter is plugged, in fact the solution is to unplug it and reboot (hard reboot with power button). If I try to reboot without unplugging it I get the same problem repeated. After a reboot cycle without the adapter I can plug it in again and the boot process becomes normal, until the next time it decides to hang. Lucio. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Alle 19:19, lunedì 7 maggio 2007, Lucio Crusca ha scritto: > # ifconfig eth5 up > SIOCSIFFLAGS: Connection timeout > but this should be the first thing to do before doing anything else. I'm > stuck. iwevent output is plain silence. I've forgotten the relevant kern.log May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() submit urb f577e8c0 May 7 19:07:36 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_chip_set_basic_rates_locked() ff0f May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_iowrite16v() error in usb_bulk_msg(). Error number -110 May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: _zd_iowrite32v_locked() error -110 in zd_usb_write16v May 7 19:07:37 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_disable_int() urb f577e8c0 killed - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Daniel Drake wrote: > Feel free to volunteer. Tried. Posted. It doesn't work. And now? > Personally I'm more than happy with my distro's > network configuration scripts and don't feel the need to reinvent the > wheel. Maybe in your case is like reinventing the wheel, but in other cases it seems the wheel is still like a square. Moreover seems to me that my script failure isn't being caused by a bug in the script itself, because it fails on the very first action, "ifconfig eth5 up". I guess the same error would happen with your distro scripts and my hardware. And the same error happens also if I try to bring the interface up from the command line, just after a reboot: # ifconfig eth5 up SIOCSIFFLAGS: Connection timeout but this should be the first thing to do before doing anything else. I'm stuck. iwevent output is plain silence. I suspect that it's not dhclient or other Debian scripts bringing the interface down, but it's the driver failing to bring it up. This would explain why I have 3 computers working and 2 not (different hardware, probably different USB controllers, only the wireless adapter is the same). Lucio. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Lucio Crusca wrote: > Ok then. Why don't we put on the website a minimal script to bring up an > interface with zd1211rw? Seems to me that, if distro scripts cause a lot of > problems, we would make a lot of users happy... Feel free to volunteer. Personally I'm more than happy with my distro's network configuration scripts and don't feel the need to reinvent the wheel. Daniel - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
I (Lucio Crusca) wrote: > Ok then. Why don't we put on the website a minimal script to bring up an > interface with zd1211rw? Seems to me that, if distro scripts cause a lot of > problems, we would make a lot of users happy... Here is my script (static ip): 8x-- #!/bin/bash -x PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin WLESS_IF=`iwconfig 2>/dev/null | grep -i essid | grep -i 'zd1211' | tr '\t' ' ' | cut --delim=' ' -f1` if [ "$WLESS_IF" == "" ] ; then exit 1 fi ifconfig $WLESS_IF up iwconfig $WLESS_IF mode managed iwconfig $WLESS_IF rate 2Mb iwconfig $WLESS_IF essid "videokernel" ifconfig $WLESS_IF 192.168.1.22 netmask 255.255.255.0 route add default gw 192.168.1.1 dev $WLESS_IF wpa_supplicant -Bw -c /etc/wpa_supplicant/wpa_supplicant.conf -i$WLESS_IF --8x Now I've just emptied /etc/network/interfaces (only "lo" defined there) and rebooted the Pundit. I'm going to run my script... here is the output: # ./wireless-up.sh + PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin ++ iwconfig ++ grep -i essid ++ grep -i zd1211 ++ tr '\t' ' ' ++ cut '--delim= ' -f1 + WLESS_IF=eth5 + '[' eth5 == '' ']' + ifconfig eth5 up SIOCSIFFLAGS: Connection timeout + iwconfig eth5 mode managed + iwconfig eth5 rate 2Mb + iwconfig eth5 essid videokernel + ifconfig eth5 192.168.1.22 netmask 255.255.255.0 SIOCSIFFLAGS: Cannot send after transport endpoint shutdown + route add default gw 192.168.1.1 dev eth5 SIOCADDRT: No such process + wpa_supplicant -Bw -c /etc/wpa_supplicant/wpa_supplicant.conf -ieth5 Please note that I've translated the two SIOCSIFFLAGS error messages but they were localized in my output. And here is the corresponding /var/log/kern.log May 7 18:09:50 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_mac_get_channel() channel 0 May 7 18:09:50 Acaja-Tour kernel: zd1211rw 3-5:1.0: iw_get_range() May 7 18:09:50 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() May 7 18:09:50 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() submit urb f4c65c40 May 7 18:09:50 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_chip_set_basic_rates_locked() ff0f May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_iowrite16v() error in usb_bulk_msg(). Error number -110 May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: _zd_iowrite32v_locked() error -110 in zd_usb_write16v May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_disable_int() urb f4c65c40 killed May 7 18:09:51 Acaja-Tour kernel: SoftMAC: Associate: Scanning for networks first. May 7 18:09:51 Acaja-Tour kernel: SoftMAC: Associate: failed to initiate scan. Is device up? May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() submit urb f4c653c0 May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() Couldn't submit urb. Error number -108 May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() submit urb f4c652c0 May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() Couldn't submit urb. Error number -108 May 7 18:09:51 Acaja-Tour kernel: zd1211rw 3-5:1.0: iw_get_range() I've forgotten to launch iwevent before my script but I guess this is enough. Why is "ifconfig eth5 up" failing? - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Alle 17:14, lunedì 7 maggio 2007, hai scritto: > I don't think iwevent prints those messages. Er... you are right... it had to be the kernel printk. iwevent was silent. > Nevertheless, this is > implying that dhclient brings the network interface down. Ok, I trust you and the logs, but I still can't figure out why it works on 3 other computers which use the same Debian 4.0, the same dhclient, the same vanilla kernel, the same configurations under /etc/network/ and the same Gigafast adapters. I'll have to accept that as a postulate. > Please try again without using dhclient or Debian's network config at > all. These 2 things have caused our users lots of problems. Ok then. Why don't we put on the website a minimal script to bring up an interface with zd1211rw? Seems to me that, if distro scripts cause a lot of problems, we would make a lot of users happy... In fact I'm the first who would be so happy to see such a script on the website, because I have a problem in writing the script myself: if I can't use dhclient, how do I configure my host in DHCP, even with a homebrew script? Moreover, could you please give me a wpa_supplicant command line that's expected to work? > This shows that nothing is even trying to connect to the wireless > network. So, please throw away all that Debian stuff and try this > manually :) Just for curiosity: has anyone already reported a bug to Debian? -- Virtual Bit di Lucio Crusca via Isonzo, 5 10069 - Villar Perosa (TO) Italy VAT No. IT09534960019 http://virtualbit.sulweb.org - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Lucio Crusca wrote: > While dhclient is trying to get in touch with the AP, iwevent > says: > > May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > submit urb e86d1e40 > May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > Couldn't submit urb. Error number -108 > May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > submit urb e86d1e40 > May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() > Couldn't submit urb. Error number -108 I don't think iwevent prints those messages. Nevertheless, this is implying that dhclient brings the network interface down. > However all the above refers to problems with Debian dhclient > and I should know that Debian dhclient is not very wireless friendly > (altough it works for me on 3 other computers, same Debian, same adapters, > same kernel...). So let's focus on problems with static IP. > > I've edited my /etc/network/interfaces and now it contains only the following: Please try again without using dhclient or Debian's network config at all. These 2 things have caused our users lots of problems. > After a reboot, "iwconfig eth5" says: > > Warning: Driver for device eth5 has been compiled with version 22 > of Wireless Extension, while this program supports up to version 20. > Some things may be broken... > > eth5 IEEE 802.11b/g ESSID:off/any Nickname:"zd1211" > Mode:Managed Access Point: Invalid As before, association not completed > Then I started iwevent and restarted networking, here is the output > of iwevent: > > Waiting for Wireless Events from interfaces... > Warning: Driver for device eth5 has been compiled with version 22 > of Wireless Extension, while this program supports up to version 20. > Some things may be broken... > > 16:05:11.988767 eth5 Set Mode:Managed This shows that nothing is even trying to connect to the wireless network. So, please throw away all that Debian stuff and try this manually :) Daniel - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Gigafast 1215 not working
Daniel Drake wrote: > There are no errors in your logs, but association did not complete. You > should now enable softmac debug messages, and also run "iwevent" in > another console while attempting to connect. > > Daniel I've enabled softmac debug messages (and also 802.11 stack debug messages). However I've stopped the trials with WEP, because I've noticed that with WPA-PSK the adapter works ok, even with Debian dhclient, at least on 3 out of 5 computers (in particular it doesn't work on 2 Pundit P1-PH1 but I hardly believe that's the real reason). The kernel is always 2.6.21.1, but I've noticed that the output of dhclient is different when the kernel is compiled for 686 or for Pentium4 (686 version makes dhclient print "send_packet: Network is down" messages that don't appear with P4 optimized version, but they both don't work nevertheless). While dhclient is trying to get in touch with the AP, iwevent says: May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() submit urb e86d1e40 May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() Couldn't submit urb. Error number -108 May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() submit urb e86d1e40 May 7 15:22:15 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() Couldn't submit urb. Error number -108 However all the above refers to problems with Debian dhclient and I should know that Debian dhclient is not very wireless friendly (altough it works for me on 3 other computers, same Debian, same adapters, same kernel...). So let's focus on problems with static IP. I've edited my /etc/network/interfaces and now it contains only the following: auto lo iface lo inet loopback auto eth5 iface eth5 inet static address 192.168.1.22 netmask 255.255.255.0 gateway 192.168.1.1 wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf My /etc/wpa_supplicant/wpa_supplicant.conf has: network={ ssid="videokernel" scan_ssid=0 key_mgmt=WPA-PSK psk="mypsk" } After a reboot, "iwconfig eth5" says: Warning: Driver for device eth5 has been compiled with version 22 of Wireless Extension, while this program supports up to version 20. Some things may be broken... eth5 IEEE 802.11b/g ESSID:off/any Nickname:"zd1211" Mode:Managed Access Point: Invalid Encryption key:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 (please note that the warning was there also when using dhcp and it's there also on computers where the adapters do work). Then I started iwevent and restarted networking, here is the output of iwevent: Waiting for Wireless Events from interfaces... Warning: Driver for device eth5 has been compiled with version 22 of Wireless Extension, while this program supports up to version 20. Some things may be broken... 16:05:11.988767 eth5 Set Mode:Managed And the "netwoking start" script said: * /etc/network/options is deprecated (see README.Debian of netbase). Setting up IP spoofing protection...done (rp_filter). Configuring network interfaces...SIOCSIFFLAGS: Cannot send after transport endpoint shutdown Could not set interface 'eth5' UP SIOCSIFFLAGS: Cannot send after transport endpoint shutdown SIOCSIFFLAGS: Cannot send after transport endpoint shutdown Failed to bring up eth5. done. So I guess that kern.log has nothing useful, however I report it here: May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() submit urb f4cf47c0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: zd_usb_enable_int() Couldn't submit urb. Error number -108 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: iw_get_range() May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security() May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().level = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().enabled = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().encrypt = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security() May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().level = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().enabled = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().encrypt = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security() May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().level = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_security().enabled = 0 May 7 16:17:08 Acaja-Tour kernel: zd1211rw 3-5:1.0: set_securi
Re: [zd1211-devs] Gigafast 1215 not working
Lucio Crusca wrote: > I run 2.6.21.1 vanilla, with .config "oldconfigured" from Debian 2.6.18, and > zd1211 debugging turned > on. Here is what it says when I plug the adapter: There are no errors in your logs, but association did not complete. You should now enable softmac debug messages, and also run "iwevent" in another console while attempting to connect. Daniel - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs