Re: [zones-discuss] dladm create-vnic not available in build 63?

2007-05-19 Thread Steffen Weiberle

Hi Manish,

Only IP Instances have been putback into Nevada. VNICs and flow management 
are not there

yet. There is a DVD image based on build 61 that was posted at
http://www.opensolaris.org/os/project/crossbow/snapshots/ but there was a 
problem
in the SPARC image. As soon as testing of the rebuild is done, both SPARC 
and x86
should be reposted. Or you can apply the BFU to 61 (and possibly later, but 
I haven't

tested that myself).

In the meantime, to use IP Instances, you need at least two links (either 
NICs or VLANs, or

aggrations, but that won't help you right now).

I have a system with an eri in the global zone and use an e1000g in the 
non-global with

IP Instance.

More info at http://www.opensolaris.org/os/project/crossbow/faq/. Let me 
know if it
does not answer your questions. I will be updating it once the 61 based DVD 
ISOs are

posted.

Steffen

reply-to set to alias

Manish Agrawal wrote:

I am trying to create zones with exclusive IP interfaces on a Dell Optiplex. My 
interpretation is that before the zones can be created, the interfaces must be 
defined using dladm create-vnic. These interfaces would then be used as the 
physical addresses for each zone configuration.

I am using OpenSolaris build 63. But why am I unable to create vnics?

Thanks
Manish

-bash-3.00# dladm show-link
e1000g0 type: non-vlan  mtu: 1500   device: e1000g0

-bash-3.00# dladm create-vnic -d e1000g0 -m 0:1:2:3:4:5 1
dladm: unknown subcommand 'create-vnic'
usage:  dladm   ...
show-link   [-p] [-s [-i ]] []
show-dev[-p] [-s [-i ]] []

create-aggr [-t] [-R ] [-P ] [-l ]
[-T ] [-u ] -d  ... 
modify-aggr [-t] [-R ] [-P ] [-l ]
[-T ] [-u ] 
delete-aggr [-t] [-R ] 
add-aggr[-t] [-R ] -d  ... 
remove-aggr [-t] [-R ] -d  ... 
show-aggr   [-pL][-s [-i ]] []

scan-wifi   [-p] [-o ,...] []
connect-wifi[-e ] [-i ] [-k ,...] [-s wep]
[-a open|shared] [-b bss|ibss] [-c] [-m a|b|g]
[-T ] []
disconnect-wifi [-a] []
show-wifi   [-p] [-o ,...] []

set-linkprop[-t] [-R ]  -p =[,...] 
reset-linkprop  [-t] [-R ] [-p ,...] 
show-linkprop   [-cP][-p ,...] 

create-secobj   [-t] [-R ] [-f ] -c  
delete-secobj   [-t] [-R ] [,...]
show-secobj [-pP][,...]
 
 
This message posted from opensolaris.org

___
zones-discuss mailing list
zones-discuss@opensolaris.org

___
zones-discuss mailing list
zones-discuss@opensolaris.org


[zones-discuss] dladm create-vnic not available in build 63?

2007-05-18 Thread Manish Agrawal
I am trying to create zones with exclusive IP interfaces on a Dell Optiplex. My 
interpretation is that before the zones can be created, the interfaces must be 
defined using dladm create-vnic. These interfaces would then be used as the 
physical addresses for each zone configuration.

I am using OpenSolaris build 63. But why am I unable to create vnics?

Thanks
Manish

-bash-3.00# dladm show-link
e1000g0 type: non-vlan  mtu: 1500   device: e1000g0

-bash-3.00# dladm create-vnic -d e1000g0 -m 0:1:2:3:4:5 1
dladm: unknown subcommand 'create-vnic'
usage:  dladm   ...
show-link   [-p] [-s [-i ]] []
show-dev[-p] [-s [-i ]] []

create-aggr [-t] [-R ] [-P ] [-l ]
[-T ] [-u ] -d  ... 
modify-aggr [-t] [-R ] [-P ] [-l ]
[-T ] [-u ] 
delete-aggr [-t] [-R ] 
add-aggr[-t] [-R ] -d  ... 
remove-aggr [-t] [-R ] -d  ... 
show-aggr   [-pL][-s [-i ]] []

scan-wifi   [-p] [-o ,...] []
connect-wifi[-e ] [-i ] [-k ,...] [-s wep]
[-a open|shared] [-b bss|ibss] [-c] [-m a|b|g]
[-T ] []
disconnect-wifi [-a] []
show-wifi   [-p] [-o ,...] []

set-linkprop[-t] [-R ]  -p =[,...] 
reset-linkprop  [-t] [-R ] [-p ,...] 
show-linkprop   [-cP][-p ,...] 

create-secobj   [-t] [-R ] [-f ] -c  
delete-secobj   [-t] [-R ] [,...]
show-secobj [-pP][,...]
 
 
This message posted from opensolaris.org
___
zones-discuss mailing list
zones-discuss@opensolaris.org