There mailing list for RedHat 7.3, i.e. valhall, hasn't been created yet. >-- Original Message -- >From: Mike Burger <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: Problems with red Hat 7.3 and virtual servers ifconfig eth0:0 > up >Reply-To: [EMAIL PROTECTED] >Date: Tue, 2 Jul 2002 23:28:54 -0400 (EDT) > > >Also, Jorge, you might want to subscribe to the valhall-list, if you're
>running 7.3. > >On Tue, 2 Jul 2002, Mike Burger wrote: > >> The problem is that both files have lines that read DEVICE="eth0". >> >> ifcfg-eth0:0 should read DEVICE="eth0:0" >> >> Fix that, run "service network restart" and you'll be set. >> >> On Tue, 2 Jul 2002, Jorge Reyes wrote: >> >> > I have a standard install of Red Hat 7.3. >> > I'm trying to setup virtual ip aliases to eth0. >> > I have created the file named ifcfg-eth0:0 located at >/etc/sysconfig/network-scripts >> > However when I try to do a ifconfig eth0:0 up I get: >> > >> > ifconfig eth0:0 up >> > SIOCSIFFLAGS: Cannot assign requested address >> > >> > The ip address is correct. >> > The eth0 ip addres is >> > >> > the file ifcfg-eth0 reads >> > >> > ################## >> > more ifcfg-eth0 >> > DEVICE="eth0" >> > ONBOOT="yes" >> > BOOTPROTO="none" >> > BROADCAST=10.0.7.255 >> > NETWORK=10.0.7.0 >> > NETMASK="255.255.255.0" >> > IPADDR="10.0.7.210" >> > USERCTL=no >> > IPXNETNUM_802_2="" >> > IPXPRIMARY_802_2="no" >> > IPXACTIVE_802_2="no" >> > IPXNETNUM_802_3="" >> > IPXPRIMARY_802_3="no" >> > IPXACTIVE_802_3="no" >> > IPXNETNUM_ETHERII="" >> > IPXPRIMARY_ETHERII="no" >> > IPXACTIVE_ETHERII="no" >> > IPXNETNUM_SNAP="" >> > IPXPRIMARY_SNAP="no" >> > IPXACTIVE_SNAP="no" >> > ##################### >> > >> > the file ifcfg-eth0:0 reads >> > ######################## >> > DEVICE="eth0" >> > ONBOOT="yes" >> > BOOTPROTO="none" >> > BROADCAST=10.0.7.255 >> > NETWORK=10.0.7.0 >> > NETMASK="255.255.255.0" >> > IPADDR="10.0.7.211-215" >> > USERCTL=no >> > IPXNETNUM_802_2="" >> > IPXPRIMARY_802_2="no" >> > IPXACTIVE_802_2="no" >> > IPXNETNUM_802_3="" >> > IPXPRIMARY_802_3="no" >> > IPXACTIVE_802_3="no" >> > IPXNETNUM_ETHERII="" >> > IPXPRIMARY_ETHERII="no" >> > IPXACTIVE_ETHERII="no" >> > IPXNETNUM_SNAP="" >> > IPXPRIMARY_SNAP="no" >> > IPXACTIVE_SNAP="no" >> > ##################### >> > >> > Any ideas. >> > >> > I have Red Hat 7.1 and 7.2 with the same config on another server and >it works with no problems. >> > >> > Thanks >> > >> > Jorge Reyes >> > >> > >> > >> > _______________________________________________ >> > Seawolf-list mailing list >> > [EMAIL PROTECTED] >> > https://listman.redhat.com/mailman/listinfo/seawolf-list >> > >> >> >> >> _______________________________________________ >> Seawolf-list mailing list >> [EMAIL PROTECTED] >> https://listman.redhat.com/mailman/listinfo/seawolf-list >> > > > >_______________________________________________ >Seawolf-list mailing list >[EMAIL PROTECTED] >https://listman.redhat.com/mailman/listinfo/seawolf-list _______________________________________________ Seawolf-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/seawolf-list
