I have a standard install of Red Hat 7.3. I'm trying to setup virtual ip aliases to eth0. I have created the file named ifcfg-eth0:0 located at /etc/sysconfig/network-scripts However when I try to do a ifconfig eth0:0 up I get:
ifconfig eth0:0 up SIOCSIFFLAGS: Cannot assign requested address The ip address is correct. The eth0 ip addres is the file ifcfg-eth0 reads ################## more ifcfg-eth0 DEVICE="eth0" ONBOOT="yes" BOOTPROTO="none" BROADCAST=10.0.7.255 NETWORK=10.0.7.0 NETMASK="255.255.255.0" IPADDR="10.0.7.210" USERCTL=no IPXNETNUM_802_2="" IPXPRIMARY_802_2="no" IPXACTIVE_802_2="no" IPXNETNUM_802_3="" IPXPRIMARY_802_3="no" IPXACTIVE_802_3="no" IPXNETNUM_ETHERII="" IPXPRIMARY_ETHERII="no" IPXACTIVE_ETHERII="no" IPXNETNUM_SNAP="" IPXPRIMARY_SNAP="no" IPXACTIVE_SNAP="no" ##################### the file ifcfg-eth0:0 reads ######################## DEVICE="eth0" ONBOOT="yes" BOOTPROTO="none" BROADCAST=10.0.7.255 NETWORK=10.0.7.0 NETMASK="255.255.255.0" IPADDR="10.0.7.211-215" USERCTL=no IPXNETNUM_802_2="" IPXPRIMARY_802_2="no" IPXACTIVE_802_2="no" IPXNETNUM_802_3="" IPXPRIMARY_802_3="no" IPXACTIVE_802_3="no" IPXNETNUM_ETHERII="" IPXPRIMARY_ETHERII="no" IPXACTIVE_ETHERII="no" IPXNETNUM_SNAP="" IPXPRIMARY_SNAP="no" IPXACTIVE_SNAP="no" ##################### Any ideas. I have Red Hat 7.1 and 7.2 with the same config on another server and it works with no problems. Thanks Jorge Reyes _______________________________________________ Seawolf-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/seawolf-list
