Raphael Coeffic writes:
> Do you set other parameters like 'sip_ip' or 'public_ip'?
i have
sip_ip=127.0.0.1
sip_port=5090
i don't set public_ip.
i'm pretty sure that 1.2 sems worked on this same host without setting
media_ip.
here is what 'ip addr' shows:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 00:01:2e:bc:9c:64 brd ff:ff:ff:ff:ff:ff
inet xxx.xxx.xxx.xxx/24 brd 192.98.100.255 scope global eth0
inet6 fe80::201:2eff:febc:9c64/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 1c:4b:d6:ef:39:22 brd ff:ff:ff:ff:ff:ff
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
the only non-loopback interface that has ip address is eth0 and it is
the first one.
-- juha
_______________________________________________
Sems mailing list
[email protected]
http://lists.iptel.org/mailman/listinfo/sems
