Apropos of which, I had recently (within the last 6 months) cut out those
weenie
speaker holes in the back deck and put in a truly kickin set of 6x9s. I
know that
"truly kickin 6x9s" has been to date an oxymoron, but these are an
exception. Besides I don't have room for a sub. So here's the question:
the rear deck, being only slightly thicker than tinfoil, is too flimsy to
mount anything serious on. So how do you stiffen it without screwing with
the trunk spring rods? And how do you make the trunk a sealed enclosure?
My thought was to use relatively stout plywood on top of the deck and behind
the rear seat, along with enough caulk to get it fairly airtight. But the
problem is once you get that made, you need to prepare the surface so you
don't have just a bare wood rear deck. Any ideas?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, January 25, 2001 6:05 PM
To: Sentra Mailing List
Subject: SML: stereo
ok im at the final stages of finishing my car stereo. alpine head unit,
alpine 6 disc changer in the trunk, mb quart component set up front and mb
quart 6x9's in the rear. now i have a 2 channel Harmon Kardon amp powering
two bazooka tubes and im gonna get a rockford fosgate 4 channel for all
speakers. heres the issue. i took the seats out and spare tire and
everything, i have a cleaned out trunk, i would like to put both amps where
the spare tire sits to make up for room, anyone ever do this have any pics.
id like to show em off with fiberglass cover. thanks tony
ANTHONY
+----------------------------------------------------------------------+
List archives ==> http://www.escribe.com/automotive/sml
Have a question? Try the archives first.
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
