Well, that's what I did to get spacing on my 6x9's (they are too deep to
clear the springs otherwise). Except I had to use 5/8" plywood to get
clearance...they are pretty hefty. However there still remains the problem
of rear deck stiffness. Speakers that otherwise kick ass don't do as well
when mounted to a flimsy deck like the B13s have. Any other thoughts?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 26, 2001 6:56 PM
To: Sentra Mailing List
Subject: Re: SML: RE: stereo
here is what i did. with my 6x9's i made a ring that was the shape of the
speaker out of wood. then i covered it with a material called felt, black
felt. it is thin and looks good. then i just attached the wood to the ring
and the rest to the rear panel. with my amps. i attatched three to a piece
of
plywood to the inside part of the trunk behind the seat. four screws hold
it,
well. you can cover this wood with felt or carpeting or whatever. i do have
little room in my trunk but man once i get the crossover i need, i will be
pumping. later tony
+----------------------------------------------------------------------+
List archives ==> http://www.escribe.com/automotive/sml
Have a question? Try the archives first.
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
