So what'd you do for it cosmetically? Anything? As I remember, there are a
couple
of difficult places where the springs attach at the two rear corners of the
deck. Were you able to cover the whole deck with board, or just most of it?
And did you airseal the deck?
-----Original Message-----
From: Alex [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 29, 2001 10:12 AM
To: Sentra Mailing List
Subject: Re: SML: RE: stereo
i ripped it all out on my b12 and made one from half inch mdf, that along
with another spacer was required for my kappa 6x9s
Alex O'Ree - [EMAIL PROTECTED]
> Well, that's what I did to get spacing on my 6x9's (they are too deep to
> clear the springs otherwise). Except I had to use 5/8" plywood to get
> clearance...they are pretty hefty. However there still remains the
problem
> of rear deck stiffness. Speakers that otherwise kick ass don't do as well
> when mounted to a flimsy deck like the B13s have. Any other thoughts?
+----------------------------------------------------------------------+
List archives ==> http://www.escribe.com/automotive/sml
Have a question? Try the archives first.
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
