(Additional info from original poster) I forgot to mention that there was nothing in the logs or the XP event viewer that was relevant.
-----Original Message----- From: J. Michael Adams [mailto:[EMAIL PROTECTED] Sent: Monday, January 02, 2006 3:07 PM To: [email protected] Subject: Plone won't return page on XP localhost I've installed Plone 2.0.5 on my XP system. (I tried 2.1.1, but it has some XP bugs in it). At first, I could not connect to the ZMI through the Plone controller. Every time I tried, I got a message that said the browser could not connect to the server. I tried going directly to localhost:8080/manage, with the same result. Then I tried disconnecting from the internet and reconnecting. That seemed to work, but I'm afraid it was just a coincidence, because it worked only that one time. After stopping and starting Plone, I had the same problem whether I was connected to the internet or not. But when I DID get the ZMI, I couldn't bring up a Plone page. Localhost/Plone returned only a single HTTP 404 header. I've tried rebooting, recycling Plone, disconnecting from the internet-- nothing works. I've also tried using the physical address and port number in the URL, like 127.0.0.1:80. Nothing works. Then I tried changing the Plone port number to 8008 and restarting Zope. That seemed to work, and I was able to use Plone just fine. That is, until the next time I recycled Zope with the Plone controller. Then I was back to square one - I couldn't get the ZMI or the Plone site no matter what port number I used. I turned off my firewall, and that didn't change anything. I tried recycling Plone several times, and still couldn't get a response from the server. I tried starting Plone and then waiting for a really long time. Nothing. I have no idea what makes it work once in a while. BTW, I have this same problem with 2.1.1. Has anyone seen this behavior before? Do you have any idea what's going on? Thanks. _______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
