I don't have IIS running. The specific bugs were the subject of a previous post (last week), subject: "Trouble creating Plone site (python exception)". It has to do with creating a new site with 2.1.1. There's no problem if you don't try to create a site. Someone else responded that they had the same problem.
> -----Original Message----- > From: Steven Williams [mailto:[EMAIL PROTECTED] > Sent: Tuesday, January 03, 2006 6:22 AM > To: [EMAIL PROTECTED] > Subject: RE: [Setup] Re: Plone won't return page on XP localhost > > Try checking to see if you have IIS running. BTW, I run Plone > 2.1.1 on XP fine all the time. Not sure why you think there > are XP bugs, and would be interested the know the particulars. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of J. Michael Adams > Sent: Monday, January 02, 2006 6:22 PM > To: [email protected] > Subject: [Setup] Re: Plone won't return page on XP localhost > > > (Additional info from original poster) > > I forgot to mention that there was nothing in the logs or the > XP event viewer that was relevant. > > -----Original Message----- > From: J. Michael Adams [mailto:[EMAIL PROTECTED] > Sent: Monday, January 02, 2006 3:07 PM > To: [email protected] > Subject: Plone won't return page on XP localhost > > I've installed Plone 2.0.5 on my XP system. (I tried 2.1.1, > but it has some XP bugs in it). > > At first, I could not connect to the ZMI through the Plone > controller. Every time I tried, I got a message that said the > browser could not connect to the server. I tried going > directly to localhost:8080/manage, with the same result. > > Then I tried disconnecting from the internet and > reconnecting. That seemed to work, but I'm afraid it was just > a coincidence, because it worked only that one time. After > stopping and starting Plone, I had the same problem whether I > was connected to the internet or not. > > But when I DID get the ZMI, I couldn't bring up a Plone page. > Localhost/Plone returned only a single HTTP 404 header. I've > tried rebooting, recycling Plone, disconnecting from the > internet-- nothing works. > > I've also tried using the physical address and port number in > the URL, like 127.0.0.1:80. Nothing works. > > Then I tried changing the Plone port number to 8008 and > restarting Zope. > That seemed to work, and I was able to use Plone just fine. > That is, until the next time I recycled Zope with the Plone > controller. Then I was back to square one - I couldn't get > the ZMI or the Plone site no matter what port number I used. > > I turned off my firewall, and that didn't change anything. I > tried recycling Plone several times, and still couldn't get a > response from the server. I tried starting Plone and then > waiting for a really long time. Nothing. > > I have no idea what makes it work once in a while. > > BTW, I have this same problem with 2.1.1. > > Has anyone seen this behavior before? Do you have any idea > what's going on? > > Thanks. > > _______________________________________________ > Setup mailing list > [email protected] http://lists.plone.org/mailman/listinfo/setup > > > -------------------------------------------------- > This transmission contains information intended to be > confidential and solely for the use of Value Line, Inc., and > those persons or entities to whom it is directed. It is not > to be reproduced, retransmitted, or in any other manner > distributed. If you receive this message in error, please > immediately delete it and all copies of it from your system, > destroy any hard copies of it and notify the sender. > > > _______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
