Hi - I already tried the latest nightly build. It didn't work at all.
You had suggested doing that in response to another problem I reported - about 2.1.1 not creating a new site on win XP. (2.1.0 has the same problem). - Michael > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Monday, January 02, 2006 7:08 PM > To: [EMAIL PROTECTED] > Cc: [email protected] > Subject: Re: [Setup] Re: Plone won't return page on XP localhost > > michael, > > could you try 2.1.1 from http://www.enfoldsystems.com/downloads.html ? > if that does not work would you mind trying Enfold Server? > you can try it free for 30 days. but we are using the same > build process for both enfold server and plone.org community > installer -- so if you give us feedback - i can get it to the > appropriate people at enfold. > > alan > > > (Additional info from original poster) > > > > I forgot to mention that there was nothing in the logs or > the XP event > > viewer that was relevant. > > > > -----Original Message----- > > From: J. Michael Adams [mailto:[EMAIL PROTECTED] > > Sent: Monday, January 02, 2006 3:07 PM > > To: [email protected] > > Subject: Plone won't return page on XP localhost > > > > I've installed Plone 2.0.5 on my XP system. (I tried 2.1.1, > but it has > > some XP bugs in it). > > > > At first, I could not connect to the ZMI through the Plone > controller. > > Every > > time I tried, I got a message that said the browser could > not connect > > to the server. I tried going directly to > localhost:8080/manage, with > > the same result. > > > > Then I tried disconnecting from the internet and reconnecting. That > > seemed to work, but I'm afraid it was just a coincidence, > because it > > worked only that one time. After stopping and starting Plone, I had > > the same problem whether I was connected to the internet or not. > > > > But when I DID get the ZMI, I couldn't bring up a Plone page. > > Localhost/Plone returned only a single HTTP 404 header. I've tried > > rebooting, recycling Plone, disconnecting from the > internet-- nothing > > works. > > > > I've also tried using the physical address and port number > in the URL, > > like 127.0.0.1:80. Nothing works. > > > > Then I tried changing the Plone port number to 8008 and > restarting Zope. > > That seemed to work, and I was able to use Plone just fine. > That is, > > until the next time I recycled Zope with the Plone > controller. Then I > > was back to square one - I couldn't get the ZMI or the > Plone site no > > matter what port number I used. > > > > I turned off my firewall, and that didn't change anything. I tried > > recycling Plone several times, and still couldn't get a > response from > > the server. I tried starting Plone and then waiting for a > really long > > time. Nothing. > > > > I have no idea what makes it work once in a while. > > > > BTW, I have this same problem with 2.1.1. > > > > Has anyone seen this behavior before? Do you have any idea what's > > going on? > > > > Thanks. > > > > _______________________________________________ > > Setup mailing list > > [email protected] > > http://lists.plone.org/mailman/listinfo/setup > > > > > _______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
