Then run zope in console mode > -----Original Message----- > From: J. Michael Adams [mailto:[EMAIL PROTECTED] > Sent: Wednesday, January 25, 2006 3:32 PM > To: 'alan runyan'; [email protected] > Subject: RE: [Setup] Certain products cause zope to fail. > > Thank you for your quick response, but I can't look at the > control panel because zope won't come up--which is the problem. > > And, as I mentioned, nothing is recorded in the event log > (probably, again, because zope is not up). > > > > -----Original Message----- > > From: alan runyan [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, January 25, 2006 1:15 PM > > To: [EMAIL PROTECTED]; [email protected] > > Subject: RE: [Setup] Certain products cause zope to fail. > > > > Look at the Zope Management Interface's > Control_Panel/Products folder. > > http://host:8080/Control_Panel/manage > > Also look at event.log > > > > alan > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of J. > Michael Adams > > > Sent: Wednesday, January 25, 2006 3:13 PM > > > To: [email protected] > > > Subject: [Setup] Certain products cause zope to fail. > > > > > > > > > > > > I installed Zope 2.7.8 and then Plone 2.1.2 on a Unix system. > > > At that point, everything seemed OK -- the default Plone > > site came up > > > with no problem. > > > > > > But when I started to move products into the product > > directory, I had > > > a problem with certain products. > > > > > > Whenever I move a particular product into the Products > > directory, Zope > > > will fail. That is, if Zope is running it'll stop. If Zope is not > > > running when I put the product in the directory, then Zope > > won't come > > > up. I try starting the Zope process with zopectl, but the process > > > won't stay up. > > > > > > It only happens with certain products, but not others. So > far, it's > > > PloneExFile and PortalTransform. I've written to the PloneExFile > > > support people, but have not yet heard back. > > > But I suspect it's something in my configuration, not a product > > > problem. > > > > > > I'm beginning to think that it only happens with products > that use > > > archetypes, but I'm not sure about that. I'm using the Archetypes > > > product that came with 2.1.2. > > > > > > I've checked the file permissions in the products, and everything > > > seems normal. > > > > > > ----My main difficulty is this: > > > > > > When the problem happens, nothing appears in any log to > indicate a > > > problem. > > > The event.log, for example, records nothing when this > happens. So I > > > don't where to look to analyze this problem. > > > > > > Any ideas? > > > > > > _______________________________________________ > > > Setup mailing list > > > [email protected] > > > http://lists.plone.org/mailman/listinfo/setup > > > > > > > > > > >
_______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
