Thank you! With debug off, Zope now comes up and I can read the errors in the event.log.
I wonder why it was on. It must be the default. > -----Original Message----- > From: Aaron VanDerlip [mailto:[EMAIL PROTECTED] > Sent: Wednesday, January 25, 2006 1:41 PM > To: [EMAIL PROTECTED] > Subject: Re: [Setup] Certain products cause zope to fail. > > Are you running in debug mode? > > > J. Michael Adams wrote: > > >Thank you for your quick response, but I can't look at the control > >panel because zope won't come up--which is the problem. > > > >And, as I mentioned, nothing is recorded in the event log (probably, > >again, because zope is not up). > > > > > > > > > >>-----Original Message----- > >>From: alan runyan [mailto:[EMAIL PROTECTED] > >>Sent: Wednesday, January 25, 2006 1:15 PM > >>To: [EMAIL PROTECTED]; [email protected] > >>Subject: RE: [Setup] Certain products cause zope to fail. > >> > >>Look at the Zope Management Interface's > Control_Panel/Products folder. > >>http://host:8080/Control_Panel/manage > >>Also look at event.log > >> > >>alan > >> > >> > >> > >>>-----Original Message----- > >>>From: [EMAIL PROTECTED] > >>>[mailto:[EMAIL PROTECTED] On Behalf Of J. > Michael Adams > >>>Sent: Wednesday, January 25, 2006 3:13 PM > >>>To: [email protected] > >>>Subject: [Setup] Certain products cause zope to fail. > >>> > >>> > >>> > >>>I installed Zope 2.7.8 and then Plone 2.1.2 on a Unix system. > >>>At that point, everything seemed OK -- the default Plone > >>> > >>> > >>site came up > >> > >> > >>>with no problem. > >>> > >>>But when I started to move products into the product > >>> > >>> > >>directory, I had > >> > >> > >>>a problem with certain products. > >>> > >>>Whenever I move a particular product into the Products > >>> > >>> > >>directory, Zope > >> > >> > >>>will fail. That is, if Zope is running it'll stop. If Zope is not > >>>running when I put the product in the directory, then Zope > >>> > >>> > >>won't come > >> > >> > >>>up. I try starting the Zope process with zopectl, but the process > >>>won't stay up. > >>> > >>>It only happens with certain products, but not others. So > far, it's > >>>PloneExFile and PortalTransform. I've written to the PloneExFile > >>>support people, but have not yet heard back. > >>>But I suspect it's something in my configuration, not a product > >>>problem. > >>> > >>>I'm beginning to think that it only happens with products that use > >>>archetypes, but I'm not sure about that. I'm using the Archetypes > >>>product that came with 2.1.2. > >>> > >>>I've checked the file permissions in the products, and everything > >>>seems normal. > >>> > >>>----My main difficulty is this: > >>> > >>>When the problem happens, nothing appears in any log to indicate a > >>>problem. > >>>The event.log, for example, records nothing when this > happens. So I > >>>don't where to look to analyze this problem. > >>> > >>>Any ideas? > >>> > >>>_______________________________________________ > >>>Setup mailing list > >>>[email protected] > >>>http://lists.plone.org/mailman/listinfo/setup > >>> > >>> > >>> > >> > >> > >> > > > >_______________________________________________ > >Setup mailing list > >[email protected] > >http://lists.plone.org/mailman/listinfo/setup > > > > > > > -- > Aaron VanDerlip > Programmer > > NetCorps > Eugene Oregon > 541 465 1127 x104 > > > > Reclaim Your Inbox! > http://www.mozilla.org/products/thunderbird > > > > _______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
