Thanks much for your quick responses. I really appreciate that. Can you point me to something that tells me what console mode is? (it's not zopectl, is it?)
In the meantime, someone showed me that turning off debug would fix my problem (I don't know how it got on.) So I'm OK for now. Thank you - Michael Adams > -----Original Message----- > From: alan runyan [mailto:[EMAIL PROTECTED] > Sent: Wednesday, January 25, 2006 2:18 PM > To: [EMAIL PROTECTED]; [email protected] > Subject: RE: [Setup] Certain products cause zope to fail. > > Then run zope in console mode > > > -----Original Message----- > > From: J. Michael Adams [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, January 25, 2006 3:32 PM > > To: 'alan runyan'; [email protected] > > Subject: RE: [Setup] Certain products cause zope to fail. > > > > Thank you for your quick response, but I can't look at the control > > panel because zope won't come up--which is the problem. > > > > And, as I mentioned, nothing is recorded in the event log > (probably, > > again, because zope is not up). > > > > > > > -----Original Message----- > > > From: alan runyan [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, January 25, 2006 1:15 PM > > > To: [EMAIL PROTECTED]; [email protected] > > > Subject: RE: [Setup] Certain products cause zope to fail. > > > > > > Look at the Zope Management Interface's > > Control_Panel/Products folder. > > > http://host:8080/Control_Panel/manage > > > Also look at event.log > > > > > > alan > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On Behalf Of J. > > Michael Adams > > > > Sent: Wednesday, January 25, 2006 3:13 PM > > > > To: [email protected] > > > > Subject: [Setup] Certain products cause zope to fail. > > > > > > > > > > > > > > > > I installed Zope 2.7.8 and then Plone 2.1.2 on a Unix system. > > > > At that point, everything seemed OK -- the default Plone > > > site came up > > > > with no problem. > > > > > > > > But when I started to move products into the product > > > directory, I had > > > > a problem with certain products. > > > > > > > > Whenever I move a particular product into the Products > > > directory, Zope > > > > will fail. That is, if Zope is running it'll stop. If > Zope is not > > > > running when I put the product in the directory, then Zope > > > won't come > > > > up. I try starting the Zope process with zopectl, but > the process > > > > won't stay up. > > > > > > > > It only happens with certain products, but not others. So > > far, it's > > > > PloneExFile and PortalTransform. I've written to the > PloneExFile > > > > support people, but have not yet heard back. > > > > But I suspect it's something in my configuration, not a product > > > > problem. > > > > > > > > I'm beginning to think that it only happens with products > > that use > > > > archetypes, but I'm not sure about that. I'm using the > Archetypes > > > > product that came with 2.1.2. > > > > > > > > I've checked the file permissions in the products, and > everything > > > > seems normal. > > > > > > > > ----My main difficulty is this: > > > > > > > > When the problem happens, nothing appears in any log to > > indicate a > > > > problem. > > > > The event.log, for example, records nothing when this > > happens. So I > > > > don't where to look to analyze this problem. > > > > > > > > Any ideas? > > > > > > > > _______________________________________________ > > > > Setup mailing list > > > > [email protected] > > > > http://lists.plone.org/mailman/listinfo/setup > > > > > > > > > > > > > > > > > > > > _______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
