Yes I pulled the devstack master from https://github.com/openstack-dev/devstack and then did git checkout stable/queens
2nd thing is that I used the new neutron services , but it did not enable the neutron networking . I tried to create port , but it did not create. What are the feature we need to install here for ODL nitrogen ? I used to install below feature for carbon # These are core ODL features ODL_NETVIRT_KARAF_FEATURE=odl-neutron-service,odl-restconf-all,odl-aaa-authn,odl-dlux-core,odl-mdsal-apidocs # Set DLUX Karaf features needed for the ODL GUI at http://<ODL_IP>:8181/index.html ODL_NETVIRT_KARAF_FEATURE+=,odl-dluxapps-nodes,odl-dluxapps-topology,odl-dluxapps-yangui,odl-dluxapps-yangvisualizer # Set L2 Karaf features needed for the ODL GUI at http://<ODL_IP>:8181/index.html ODL_NETVIRT_KARAF_FEATURE+=,odl-l2switch-switch,odl-l2switch-switch-ui,odl-ovsdb-hwvtepsouthbound-ui,odl-ovsdb-southbound-impl-ui,odl-netvirt-ui # Set OpenFlow Karaf features needed for the ODL GUI at http://<ODL_IP>:8181/index.html ODL_NETVIRT_KARAF_FEATURE+=,odl-openflowplugin-flow-services-ui # odl-netvirt-openstack is used for new netvirt ODL_NETVIRT_KARAF_FEATURE+=,odl-netvirt-openstack # optional feature neutron-logger to log changes of neutron yang models ODL_NETVIRT_KARAF_FEATURE+=,odl-neutron-logger # enable the odl-netvirt-sfc Karaf feature in OpenDaylight ODL_NETVIRT_KARAF_FEATURE+=,odl-netvirt-sfc Thanks Om Prakash From: Sam Hague [mailto:[email protected]] Sent: Tuesday, May 29, 2018 2:57 PM To: PRAKASH, OM <[email protected]> Cc: [email protected]; SINGH, ABHIJEET K <[email protected]>; FREEMAN, BRIAN D <[email protected]>; om prakash <[email protected]>; [email protected]; [email protected] Subject: Re: [sfc-dev] Opendaylight support for networking-sfc On Tue, May 29, 2018 at 2:21 PM, PRAKASH, OM <[email protected]<mailto:[email protected]>> wrote: Hi Sam/Jaime, I looked in to the config file and I see control local.conf file . I see that q-svc service is not enabled and if you don’t enable , then ODL networking will not work. In pike or queens the neutron legacy values were changed to the new neutron values, q-svc is now neutron, q-dhcp is neutron-dhcp. Here is the link to the upstream netvirt-sfc job, which should have the driver working: https://logs.opendaylight.org/releng/vex-yul-odl-jenkins-1/netvirt-csit-1node-openstack-queens-sfc-fluorine/39/control_1/local.conf.gz<https://urldefense.proofpoint.com/v2/url?u=https-3A__logs.opendaylight.org_releng_vex-2Dyul-2Dodl-2Djenkins-2D1_netvirt-2Dcsit-2D1node-2Dopenstack-2Dqueens-2Dsfc-2Dfluorine_39_control-5F1_local.conf.gz&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=nGABpS95qb7WLoWMNmdaQg&m=LiUEbbD-flVkmEHcrPZaysOGRE_v-19Sj4sqkD6wroM&s=g0bmNHrtpKC21Vju5l4PoWU_GD37R71TGHR8Qr141Gs&e=> I tested it and find the issue that neutron network was not enable with ODL https://logs.opendaylight.org/releng/vex-yul-odl-jenkins-1/netvirt-csit-1node-openstack-queens-sfc-oxygen/12/control_1/local.conf.gz<https://urldefense.proofpoint.com/v2/url?u=https-3A__logs.opendaylight.org_releng_vex-2Dyul-2Dodl-2Djenkins-2D1_netvirt-2Dcsit-2D1node-2Dopenstack-2Dqueens-2Dsfc-2Doxygen_12_control-5F1_local.conf.gz&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=nGABpS95qb7WLoWMNmdaQg&m=LiUEbbD-flVkmEHcrPZaysOGRE_v-19Sj4sqkD6wroM&s=0851cJpYinQsaZpvEoYWPcthQzf_jA-mN-p8Goh_o6I&e=> After I enabled the q-svc service , then I got the same issue as previous one. Shouldn't mix legacy and new neutron together. The below stack.log is similar to your log, but finds the "_neutron_service_plugin_class_add" function. What version of devstack do you have? I would look into your devstack source and make sure the function is defined. I recall you started with an older version, so if you simply did a git pull or changed your git branch for devstack then you might have issues. devstack is very fragile when switching versions. It is almost always best to build from scratch unless you have the time to debug a busted setup. The other difference is this is running master and not queens. notice we are using "neutron_service_plugin_class_add" while you have "_neutron_service_plugin_class_add". Notice the extra _ in your log, which means you are on queens (or earlier) https://logs.opendaylight.org/releng/vex-yul-odl-jenkins-1/netvirt-csit-1node-openstack-queens-sfc-fluorine/39/control_1/stack.log.gz<https://urldefense.proofpoint.com/v2/url?u=https-3A__logs.opendaylight.org_releng_vex-2Dyul-2Dodl-2Djenkins-2D1_netvirt-2Dcsit-2D1node-2Dopenstack-2Dqueens-2Dsfc-2Dfluorine_39_control-5F1_stack.log.gz&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=nGABpS95qb7WLoWMNmdaQg&m=LiUEbbD-flVkmEHcrPZaysOGRE_v-19Sj4sqkD6wroM&s=IMqWUbRqVe5P93ucMDAEjmYBpw_GzOo_sxp08qhvbm0&e=> 2018-05-28 09:47:57.788 | ++ ./stack.sh:echo_summary:439 : echo -e Configuring networking-sfc 2018-05-28 09:47:57.790 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:source:38 : networking_sfc_configure_common 2018-05-28 09:47:57.791 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:networking_sfc_configure_common:22 : is_service_enabled q-svc neutron-api 2018-05-28 09:47:57.803 | ++ functions-common:is_service_enabled:1908 : return 0 2018-05-28 09:47:57.804 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:networking_sfc_configure_common:23 : _networking_sfc_install_server 2018-05-28 09:47:57.806 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:_networking_sfc_install_server:8 : neutron_service_plugin_class_add networking_sfc.services.flowclassifier.plugin.FlowClassifierPlugin 2018-05-29 18:02:48.158 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:networking_sfc_configure_common:23 : is_service_enabled q-svc 2018-05-29 18:02:48.252 | ++ functions-common:is_service_enabled:1908 : return 0 2018-05-29 18:02:48.262 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:networking_sfc_configure_common:24 : _networking_sfc_install_server 2018-05-29 18:02:48.276 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:_networking_sfc_install_server:8 : _neutron_service_plugin_class_add networking_sfc.services.flowclassifier.plugin.FlowClassifierPlugin 2018-05-29 18:02:48.280 | /opt/stack/networking-sfc/devstack/plugin.sh: line 8: _neutron_service_plugin_class_add: command not found 2018-05-29 18:02:48.300 | + /opt/stack/networking-sfc/devstack/plugin.sh:_networking_sfc_install_server:1 : exit_trap 2018-05-29 18:02:48.314 | + ./stack.sh:exit_trap:510 : local r=127 2018-05-29 18:02:48.329 | ++ ./stack.sh:exit_trap:511 : jobs -p 2018-05-29 18:02:48.346 | + ./stack.sh:exit_trap:511 : jobs= 2018-05-29 18:02:48.362 | + ./stack.sh:exit_trap:514 : [[ -n '' ]] 2018-05-29 18:02:48.370 | + ./stack.sh:exit_trap:520 : '[' -f /tmp/tmp.j1OaiWkbxD ']' 2018-05-29 18:02:48.380 | + ./stack.sh:exit_trap:521 : rm /tmp/tmp.j1OaiWkbxD 2018-05-29 18:02:48.402 | + ./stack.sh:exit_trap:525 : kill_spinner 2018-05-29 18:02:48.417 | + ./stack.sh:kill_spinner:424 : '[' '!' -z '' ']' 2018-05-29 18:02:48.439 | + ./stack.sh:exit_trap:527 : [[ 127 -ne 0 ]] 2018-05-29 18:02:48.459 | + ./stack.sh:exit_trap:528 : echo 'Error on exit' 2018-05-29 18:02:48.460 | Error on exit 2018-05-29 18:02:48.470 | + ./stack.sh:exit_trap:530 : type -p generate-subunit 2018-05-29 18:02:48.482 | + ./stack.sh:exit_trap:531 : generate-subunit 1527615858 1110 fail 2018-05-29 18:02:50.105 | + ./stack.sh:exit_trap:533 : [[ -z /opt/stack/logs ]] 2018-05-29 18:02:50.124 | + ./stack.sh:exit_trap:536 : /opt/devstack/tools/worlddump.py -d /opt/stack/logs 2018-05-29 18:02:52.159 | + ./stack.sh:exit_trap:545 : exit 127 ubuntu@master:~/devstack$ Thanks Om Prakash From: PRAKASH, OM Sent: Tuesday, May 22, 2018 6:14 AM To: 'Sam Hague' <[email protected]<mailto:[email protected]>> Cc: [email protected]<mailto:[email protected]>; SINGH, ABHIJEET K <[email protected]<mailto:[email protected]>>; FREEMAN, BRIAN D <[email protected]<mailto:[email protected]>>; om prakash <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: RE: [sfc-dev] Opendaylight support for networking-sfc Thank you Sam and Jaime for help. I am going on Vacation this week. I will work on this next week. Thanks Om Prakash From: Sam Hague [mailto:[email protected]] Sent: Monday, May 21, 2018 8:56 PM To: PRAKASH, OM <[email protected]<mailto:[email protected]>> Cc: [email protected]<mailto:[email protected]>; SINGH, ABHIJEET K <[email protected]<mailto:[email protected]>>; FREEMAN, BRIAN D <[email protected]<mailto:[email protected]>>; om prakash <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: Re: [sfc-dev] Opendaylight support for networking-sfc As Jaime mentioned, ocata is old. You should have better luck with oxygen and queens. [1] is our upstream job that works for queens and oxygen. Try to compare your local.conf to those in the job. [1] https://logs.opendaylight.org/releng/vex-yul-odl-jenkins-1/netvirt-csit-1node-openstack-queens-sfc-oxygen/12/<https://urldefense.proofpoint.com/v2/url?u=https-3A__logs.opendaylight.org_releng_vex-2Dyul-2Dodl-2Djenkins-2D1_netvirt-2Dcsit-2D1node-2Dopenstack-2Dqueens-2Dsfc-2Doxygen_12_&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=nGABpS95qb7WLoWMNmdaQg&m=VmyUKoSNNwpont5MhaIy76Vn-f3PBIyrsKzRt-O4XDw&s=7ZSTefNwzONO991WH7zFt5YyEsPKaGn1SlxMGHdHdvY&e=> On Mon, May 21, 2018 at 7:10 PM, PRAKASH, OM <[email protected]<mailto:[email protected]>> wrote: Today I tried to build devstack queen with ODL Oxygen but could not make it working . It is failing at the build. Same local.conf file I have used with Ocata and ODL carbon. I am not sure why it is failing for this issue .Why it is not able to find . Local.conf file is here http://paste.openstack.org/show/721520/<https://urldefense.proofpoint.com/v2/url?u=http-3A__paste.openstack.org_show_721520_&d=DwMFaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=nGABpS95qb7WLoWMNmdaQg&m=VmyUKoSNNwpont5MhaIy76Vn-f3PBIyrsKzRt-O4XDw&s=c3_zDg8Gg18biK3Z6ODyBSmj3qkjD2A8HbnrNgmljDQ&e=> 2018-05-21 22:03:34.546 | ++ ./stack.sh:echo_summary:433 : [[ True != \T\r\u\e ]] 2018-05-21 22:03:34.565 | ++ ./stack.sh:echo_summary:439 : echo -e Configuring networking-sfc 2018-05-21 22:03:34.582 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:source:39 : networking_sfc_configure_common 2018-05-21 22:03:34.602 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:networking_sfc_configure_common:23 : is_service_enabled q-svc 2018-05-21 22:03:34.699 | ++ functions-common:is_service_enabled:1908 : return 0 2018-05-21 22:03:34.731 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:networking_sfc_configure_common:24 : _networking_sfc_install_server 2018-05-21 22:03:34.746 | ++ /opt/stack/networking-sfc/devstack/plugin.sh:_networking_sfc_install_server:8 : _neutron_service_plugin_class_add networking_sfc.services.flowclassifier.plugin.FlowClassifierPlugin 2018-05-21 22:03:34.751 | /opt/stack/networking-sfc/devstack/plugin.sh: line 8: _neutron_service_plugin_class_add: command not found 2018-05-21 22:03:34.788 | + /opt/stack/networking-sfc/devstack/plugin.sh:_networking_sfc_install_server:1 : exit_trap 2018-05-21 22:03:34.803 | + ./stack.sh:exit_trap:510 : local r=127 2018-05-21 22:03:34.845 | ++ ./stack.sh:exit_trap:511 : jobs -p 2018-05-21 22:03:34.869 | + ./stack.sh:exit_trap:511 : jobs= 2018-05-21 22:03:34.897 | + ./stack.sh:exit_trap:514 : [[ -n '' ]] 2018-05-21 22:03:34.931 | + ./stack.sh:exit_trap:520 : '[' -f /tmp/tmp.quaCruhjzJ ']' 2018-05-21 22:03:34.963 | + ./stack.sh:exit_trap:521 : rm /tmp/tmp.quaCruhjzJ 2018-05-21 22:03:35.012 | + ./stack.sh:exit_trap:525 : kill_spinner 2018-05-21 22:03:35.043 | + ./stack.sh:kill_spinner:424 : '[' '!' -z '' ']' 2018-05-21 22:03:35.096 | + ./stack.sh:exit_trap:527 : [[ 127 -ne 0 ]] 2018-05-21 22:03:35.111 | + ./stack.sh:exit_trap:528 : echo 'Error on exit' 2018-05-21 22:03:35.111 | Error on exit 2018-05-21 22:03:35.134 | + ./stack.sh:exit_trap:530 : type -p generate-subunit 2018-05-21 22:03:35.155 | + ./stack.sh:exit_trap:531 : generate-subunit 1526937942 2273 fail 2018-05-21 22:03:36.303 | + ./stack.sh:exit_trap:533 : [[ -z /opt/stack/logs ]] 2018-05-21 22:03:36.311 | + ./stack.sh:exit_trap:536 : /opt/devstack/tools/worlddump.py -d /opt/stack/logs 2018-05-21 22:03:37.863 | + ./stack.sh:exit_trap:545 : exit 127 ~ Thanks Om Prakash -----Original Message----- From: Jaime Caamaño Ruiz [mailto:[email protected]<mailto:[email protected]>] Sent: Monday, May 21, 2018 6:11 AM To: PRAKASH, OM <[email protected]<mailto:[email protected]>>; Sam Hague <[email protected]<mailto:[email protected]>> Cc: SINGH, ABHIJEET K <[email protected]<mailto:[email protected]>>; FREEMAN, BRIAN D <[email protected]<mailto:[email protected]>>; om prakash <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: Re: [sfc-dev] Opendaylight support for networking-sfc Hello I think that you might be using an old version of networking-odl. For networking-sfc support, ocata + carbon is just too old. You will have better luck with queens + oxygen. You might also be interested in the OPNFV SFC project, which is the main driver for networking-sfc ODL integration: https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.opnfv.org_display_sfc_Service-2BFunction-2BChaining-2BHome&d=DwICaQ&c=LFYZ-o9_HUMeMTSQicvjIg&r=nGABpS95qb7WLoWMNmdaQg&m=5nQAN7pPWfWj3U_JdewnPzgfHwmXJh2xCAsiXCtm-zE&s=lNVXx4K1UjH9fxzIdg9bncsbf_psOVd8J90DN5rKXgo&e= BR Jaime.
_______________________________________________ sfc-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/sfc-dev
