Hi all, Last week I was able to connect the shimmer by updating the firmware as you suggested and I saw the data streamming in the multi shimmer sync. Now I want to develop a gesture recognizer with the EMG. My question is what tools do I need for that? Where should I develop and in what language? In other words what do you recommend? I have visual studio 2012 (C#) and Eclipse for Java (I'm currently installing plugins for android development). Does Shimmer have libraries for any of these IDEs and examples?
my best regards, David 2014-03-19 5:54 GMT+00:00 Dang Thi Hai Ha <[email protected]>: > Hi David, > > For my sensors, I use ShimmerConnect (provided by Shimmer company) to > stream the data from the sensors. Have you tried it? > > Best, > > Ha Dang. > > > On Wed, Mar 19, 2014 at 12:38 AM, David Costa <[email protected]>wrote: > >> Hi John, >> I have a Shimmer2R. Do I need to update the firmware also? >> >> best, >> David >> >> >> >> 2014-03-18 23:26 GMT+00:00 John Coe <[email protected]>: >> >> David, >>> >>> >>> >>> Are you using a Shimmer3? I recently had a similar issue with Shimmer3, >>> and found that it had come with an outdated firmware installed. Try using >>> the bootstrap loader to upload the BtStream_v0.2.0_shimmer3 firmware. >>> >>> >>> >>> -John >>> >>> >>> >>> >>> >>> John Coe | Lab Engineer | STX | *o:* 410.837.2022 | *f:* 410.837.7325| *e: >>> **[email protected] <[email protected]>* | *i:* stx.com <http://www.stx.com/> >>> >>> This e-mail message may contain or attach information from STX, LLC. >>> that may be confidential. If it does, that information is for the exclusive >>> use of the intended recipient and shall not be retained or disclosed to >>> others without the written permission of STX, LLC. If you are not the >>> intended recipient of this e-mail, please notify the sender by return >>> e-mail, delete the e-mail from your computer and servers, and do not make >>> or keep any copies of it. Thank you. >>> >>> >>> >>> *From:* [email protected] [mailto: >>> [email protected]] *On Behalf Of *David Costa >>> *Sent:* Tuesday, March 18, 2014 6:36 PM >>> *To:* [email protected] >>> *Subject:* [Shimmer-users] Help with Shimmer >>> >>> >>> >>> Hi, >>> >>> I don't know if here is the best place to post my doubts and problems >>> and I firstly apologize for that. >>> >>> I'm new in this area of hardware and sensors, but I'm starting to work >>> with Shimmer EMGs. >>> >>> I read part of the manuals provided and installed the sensor and needed >>> software. However, when I run the Multi Shimmer Sync although the >>> application detects my sensor (I can see the ID of the EMG) when I click on >>> connect it never successfully connects and stays in idle status. >>> >>> I would like to know if I'm doing something wrong here, I couldn't find >>> an answer in the FAQ section, thanks in advance for your help. >>> >>> >>> >>> best regards, >>> >>> David Costa >>> >> >> >> _______________________________________________ >> Shimmer-users mailing list >> [email protected] >> https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users >> >> >
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
