----- Original Message ----- From: Charlie <[EMAIL PROTECTED]> Sent: Monday, September 09, 2002 9:21 AM
>FYI, I have built 2 MV2 ( SMT's) and both were 195 Grams. >These heads are 380cc and the 10.5 degrees appears to be >at least 2 degrees closed and very upright. >The SMT listed specs ( on the web ) are 56 degrees lie, >1 closed and 199 grams. >Great solid head and could be a good one for longer shafts. Charlie, I ordered an Mv2 head, and also noticed that it was much lighter than spec. Mine was 194g. The possibilities for a long driver occurred to me also, but unfortunately that was not the project I had ordered it for. I also measured its face height at 52mm, much less than the 59mm claimed in the specs. Which brings me to... There was a discussion a short while ago about whether the Mv2 has specific slice or hook tendencies. (For instance, the Baltusrol has been reported to slice a lot.) Have you noticed any? Thanks, DaveT
