John, Is it really important? Use the normal 2" solvent type and be done with it! If you use some cheapo stuff that doesn't work very good, you may lose a customer. Al
At 04:20 PM 9/24/2002, you wrote: >Dave: > >No, not a poll. >My question: >Is there any reason to buy a premium quality solvent activated grip tape >or does cheapo work just as well. >John > >>>Any reason that a person would use a premium type grip tape over a >>>cheapee >>one? >>>I'm going to include a precut 2"X 10" hunk of two sided grip tape with >>>my new >>grip line and would go with a premium two sided tape if it >>>makes a difference. >>Easier grip installation? Lasts Longer? Won't >>>bunch up under the grip? >>>If grip tape is grip tape, I'll go with the cheapee. >>>Thanks! > >>>John Muir >>>clubmaker online/shoptalk > > > >>Normally, I wouldn't answer just to say, "I agree." But since you seem to be >>taking a bit of a poll -- "I agree with Ed on all three of his points." >> >>Cheers! >>DaveT >> >>----- Original Message ----- >>From: Ed Reeder <[EMAIL PROTECTED]> >>Sent: Tuesday, September 24, 2002 3:21 PM >> >> >>> FWIW - I can't stand 2" grip tape. Seems almost impossible to >>> remove a grip if you want to save it. >>> >>> The 3/4" works great for me. I don't spiral it, just straight up >>> over the butt and down the other side. Simplicity and works great. >>> >>> You'll notice I didn't answer your question :-) I buy from whoever >> > my next component order is with. >> > >> > /Ed
