Re: ShopTalk: Date: Fri, 7 Feb 2003 18:25:01 -0500

[Bobby D.]

Thank you, Sincerly! Bobby D. ----- Original Message ----- From: skismith To: [EMAIL PROTECTED] Sent: Friday, February 07, 2003 8:06 PM Subject: Re: ShopTalk: Date: Fri, 7 Feb 2003 18:25:01 -0500 Bobby, don't let us curmudgeons (sp?) get under your skin. It's friday! Lettin off a little steam. It will be a .350 for the shaft, but is the hosel a .350 bore? Double check everything. (measure twice......cut once!)      Tip trim? Check with where you got the head, they should list the bore of the hosel. If both are  .350 go for it like you said. Remember to prep the shaft before epoxying, then clean everything well, let it set at least 24 hrs. Play around or two with it and report back that you're hitting them long and straight!   "Bobby D." wrote: Sorry! I am referring to the ferrule. Excuse me! Bobby D. ----- Original Message ----- From: "Steve "Cub" Culbreth" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, February 07, 2003 6:36 PM Subject: Re: ShopTalk: Date: Fri, 7 Feb 2003 18:25:01 -0500 > What??? > > Is it possible that you are calling a ferrule a hosel?? > > Cub > > ----- Original Message ----- > From: "Bobby D." <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, February 07, 2003 1:25 PM > Subject: ShopTalk: Date: Fri, 7 Feb 2003 18:25:01 -0500 > > > > This is the first time I am reshfting a club. I would like to know how and > > when to install the hosel. I am putting a .350 Aldila One shaft into a > 340cc > > Tsunami head. Before I insert the shaft with epoxy on it, should I put the > > hosel a bit higher on the shaft and insert the shaft into the head? Then > > slide the hosel with a little epoxy on it snugly on top of the neck? And > > what size hosel should I get? .350? Thank you. > > Bobby D. > > >