John, He obviously doesn't know much about the Neufinder 1 or 2. They automatically track the NBP (and spine) wherever it is on the shaft that you are trimming. Incidentally, I have found very few shafts which have a corkscrew spine. Some shafts have an NBP that will move a few degrees in the first four inches from the tip, but not many.
Bernie Writeto: [EMAIL PROTECTED] ----- Original Message ----- From: "John Sundahl" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, March 17, 2003 3:58 PM Subject: Re: ShopTalk: Straightness finder > I was told last week by a club fitter in Palm Desert that spine finders are inefficient because the spine wraps around the shaft. I got a sense that he was saying spines are shaped like a corkscrew. Any comments? > -- > John Sundahl > Sundahl, Powers, Kapp & Martin, LLC > 1725 Carey Avenue > Cheyenne, WY 82001 > 307.632.6421 (voice) > 307.632.7216 (fax) > [EMAIL PROTECTED] > > This e-mail transmission and any attachments to it contains information from the law firm of Sundahl, Powers, Kapp & Martin, LLC which may be confidential and/or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or the use of the contents of this information is prohibited. If you have received this e-mail in error, please notify me by telephone or return e-mail immediately so that I can arrange for the deletion of the information and destruction of any copies that have been made at no cost to you. > > > On Monday, March 17, 2003 12:37 PM, Greg Zachmann <[EMAIL PROTECTED]> wrote: > >Mr. Corey B are you out there. Tedd Childers mentioned your "straightness > >finder" and also made mention of your notes. Could you repost your notes on > >making this device. It would certainly come in handy to quote the out of > >roundness to a supplier when I wanted to return a defective > >shaft. > > > >Thanks, > > > >GregZ > > > > > > > > > > >
