I have
a question regarding SA2000, which is my primary adhesive. After using a
blowtorch to remove heads bonded with SA2000, I have noticed a residue of
whitish crystals on the shaft. A few days ago there was a failure on two irons.
An eight iron flew off the shaft and into a lake and a seven iron head could be
twisted off easily by hand. On the seven-iron shaft I did not notice any
residue. The shaft looked as if part A had been applied and was
ready for Part B. I did of course use Part B.
Can
anyone tell me what might have happened? The clubs had been stored in the trunk
of a car on a day in which we broke 100 degrees.
TIA,
Hunter
-----Original Message-----
From: Mark A Patton [mailto:[EMAIL PROTECTED]
Sent: Friday, August 22, 2003 5:05 PM
To: [EMAIL PROTECTED]
Subject: ShopTalk: SA 2000 contact infoAs I see a post every now and then regarding this product, I wanted to forward some info I just received.I just received a letter from David Bushman. They have relocated to SC and are looking to more aggressively market SA 2000.They are in relations with CA Plus he notes.701 Kingsbridge RdColumbia SC 29210803-798-8661He noted he is hoping to have a prescence at the PCS show in March. He also sent his appreciation for those that kept tracking him down through his many moves.There are MSDS and TDS forms online.Mark A Patton
