|
If the outside temp reached 100 degrees, the temp inside your
trunk probably reached 150 degrees and that could have been your
problem.
-------Original
Message-------
Date: Tuesday, August
26, 2003 11:20:09 AM
Subject: RE:
ShopTalk: SA 2000 contact info
I have a question regarding SA2000, which is my primary adhesive.
After using a blowtorch to remove heads bonded with SA2000, I have
noticed a residue of whitish crystals on the shaft. A few days ago there
was a failure on two irons. An eight iron flew off the shaft and into a
lake and a seven iron head could be twisted off easily by hand. On the
seven-iron shaft I did not notice any residue. The
shaft looked as if part A had been applied and was ready for Part
B. I did of course use Part B.
Can anyone tell me what might have happened? The clubs had been
stored in the trunk of a car on a day in which we broke 100
degrees.
TIA,
Hunter
As I see a post every now and then regarding
this product, I wanted to forward some info I just
received.
I just received a letter from David Bushman.
They have relocated to SC and are looking to more aggressively market
SA 2000.
They are in relations with CA Plus he
notes.
701 Kingsbridge Rd
Columbia SC 29210
803-798-8661
He noted he is hoping to have a prescence at
the PCS show in March. He also sent his appreciation for those that
kept tracking him down through his many moves.
There are MSDS and TDS forms
online.
Mark A Patton
|