Mike, Golf Direct (Low Pro) has the BOM. http://www.glfdirect.com/
(John, didn't see the BOM on your Bang list. Is Clubmaker Online carrying the Bang-O-Matic?) Bernie Writeto: [EMAIL PROTECTED] ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 10, 2003 8:04 PM Subject: Re: ShopTalk: Parallel Tip Section - TT DGR300 vs DGS300 > Where is the BOM available from? > Mike > > > > Yeah, I know about the BOM heel issue and the USGA, supposedly there will > > be a new batch of BOMs getting here in 4-6 weeks. I'm really curious to > > hear the real story and actualy differences between the original BOM, the > > M-series what what will become the third series of BOM. Apparently the > > heads are non-conforming because of an over-extending heel. Has anyone > > measured them to confirm that they are non-conforming? How much of a > > difference in heel area is there between the original series and M-series? > > Sounds like a big fiasco, I sure wouldn't want to be in Steve Almo's > > shoes! > > > > I get plenty of length with steel shafts already, with the 450 I used to > > have I was getting about 250-280 yards on solid shots. When trying longer > > and lighter graphite shafts I occasionally hit it farther but don't catch > > it on the screws as often. > > > > Thanks for the input on the shaft flex, I will order a full flex softer if > > I decide to get one of these non-conforming BOMs. > > > > -Dave > > > > Ron Kellison said: > > > I've built several of the clubs, and I heartily recommend that a > > > graphite shaft be used if you really want to realize the potential of > > > this head. I have discovered that you should assume a full flex > > > difference (10 cpm) between a normal insertion depth and the BOM. My > > > favourite shaft for this head is an Apache MFS65N (in dark blue), which > > > means that I order an A-2 flex if I want an R-2 in the finished club. > > > I've also discovered that most Canadian golfers aren't big fans of the > > > "gaudy without being tasteful" Orange Crush colour, but love theblue > > > version and the results they get with the shaft. > > > > > > FWIW, I now understand that the USGA has deemed the BOM non-conforming, > > > even if it carries the "M" serial number. I make certain that each of > > > my customers know this before I order the head. That said, it's still a > > > beautiful, well performing head. > > > > > >
