Tom
Specifying the maclist option on a host file entry that defines a bport e.g.
p1 eth1:10.1.1.0/24 maclist
produces the following error:
ERROR: Unable to determine the IP address(es) of eth1
Note, eth1 is bound to br0 and the output from the "ip addr show" command is
below:
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:10:5a:6f:c3:10 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.24/24 brd 192.168.0.255 scope global eth0
inet6 fe80::210:5aff:fe6f:c310/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 00:50:da:50:c4:a1 brd ff:ff:ff:ff:ff:ff
4: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
8: br0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
link/ether 00:50:da:50:c4:a1 brd ff:ff:ff:ff:ff:ff
inet 10.1.1.1/24 brd 10.1.1.255 scope global br0
inet6 fe80::250:daff:fe50:c4a1/64 scope link
valid_lft forever preferred_lft forever
Steven.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Shorewall-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-devel
