Egidijus,
given everything you've said, I suspect that something is wrong with the
DBus configuration on your system. When Shotwell starts up, it uses a
library called libunique to determine if another instance is already
running. libunique in turn uses DBus. Something is going wrong with
this mechanism on your system, so when you run Shotwell it thinks
another instance is running and immediately exits.
First, most obviously, I assume you've tried rebooting your system - yes?
If a reboot doesn't work, I'd recommend backing up your files and
reinstalling Ubuntu 10.10. That will take a couple of hours, but it
will almost certainly solve your problem. Otherwise you could try
searching the Web for [Unique-DBus-WARNING] to see if you can find a fix
from others who've seen this problem. I strongly suspect that the
trouble you're seeing is unrelated to Shotwell itself.
adam
On 02/02/2011 10:35 AM, Egidijus Kamarauskas wrote:
Hello
Excuse me for a very unclear explanation of my situation.
1) I installed Ubuntu 10.10. Shotwell was operate very well.
2) After regular updates from official repos, Shotwell does not
started. In a terminal a error was displayed, related to a
unique-DBus-WARNING**: ....
3) I have tried to update Shotwell to version 0.8.1 from PPA. Now
Shotwell does not start, does not run. In a terminal NO errors is
displayed.
I send logs, that is generated in a situation 3, after updating Shotwell.
2011.02.02 20:19, Jim Nelson rašė:
Hello,
I'm not sure I understand your last email. Are you saying that now
Shotwell runs fine?
-- Jim
On Tue, Feb 1, 2011 at 2:20 PM, Egidijus Kamarauskas
<[email protected]
<mailto:[email protected]>> wrote:
Hallo.
I have attached required files of logs and one screen-shot from a
Gnome system monitor, to illustrate my problem.
On my machine is Ubuntu 10.10 running, 64 bit.
Shotwell version is 0.8.1, from PPA.
A little bit of explanation - when I haved a Shotwell version,
that comes with Ubuntu 10.10, Shotwell stops working without any
reason with this error : "
Unique-DBus-WARNING **: Error while sending message: Did not
receive a
reply. Possible causes include: the remote application did not
send a
reply, the message bus security policy blocked the reply, the reply
timeout expired, or the network connection was broken
"
Then I have tried to update Shotwell to 0.8.1 version from PPA.
Now Shotwell simply does not start without any errors.
Best Regards.
2011.02.01 21:52, Vera Yin rašė:
Hi Egidijus,
If you could follow these instructions and send back the two
files, it
would help us diagnose the problem:
http://trac.yorba.org/wiki/Shotwell/FAQ#IfoundabuginShotwell.HowcanIreportit
Thanks,
Vera
On Sun, Jan 30, 2011 at 5:10 AM, Egidijus Kamarauskas
<[email protected]
<mailto:[email protected]>> wrote:
Hello
I'm using Ubuntu 10.10 and shotwell 0.8.1 from ppa.
I can not start shotwell. When i send „shotwell“ to a
terminal, i see
this error
"Unique-DBus-WARNING **: Error while sending message: Did
not receive a
reply. Possible causes include: the remote application did
not send a
reply, the message bus security policy blocked the reply,
the reply
timeout expired, or the network connection was broken."
And I see, that shotwell is using about a 600 MB of RAM,
and between
70-80 percent of CPU.
This error occures after 10 - 20 minutes after sending a
command to a
terminal.
I have only security updates enabled.
_______________________________________________
Shotwell mailing list
[email protected] <mailto:[email protected]>
http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell
_______________________________________________
Shotwell mailing list
[email protected] <mailto:[email protected]>
http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell
_______________________________________________
Shotwell mailing list
[email protected]
http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell
_______________________________________________
Shotwell mailing list
[email protected]
http://lists.yorba.org/cgi-bin/mailman/listinfo/shotwell
