Akbar, After issuing ../Src/obj_setup.sh from the Obj directory there will be no arch.make, indeed. The command ../Src/obj_setup.sh just sets up the necessary files for the compilation, but the arch.make is provided by the user, unless the user types ../Src/configure. There is no need to re-download the whole package, it is enough to follow - strictly - the steps I have written in my previous email. Trust me, I've been through it many many times, in many different places. :) If you follow the first five steps I specify below **by the letter**, I am sure it will start the compilation problem without the problem of not finding an arch.make. The sixth step is optional.
To make it even easier, let's suppose that your arch.make is in your home directory (we'll call it /home/akbar/arch.make) and that siesta is in /home/akbar/siesta3.0-rc2. Just follow the steps replacing /home/akbar and /home/akbar/siesta3.0-rc2 by whatever is appropriate and do not use the double quotes: 1) From whichever directory you are, type "cd /home/akbar/siesta3.0-rc2/Obj" 2) Type "../Src/obj_setup.sh" 3) Type "cp /home/akbar/arch.make ." 4) Make sure that arch.make is in Obj by typing "ls arch.make". if some error appears, then make sure you can copy arch.make to the directory. 5) Type "make" 6) Watch siesta be compiled in awe :) Of course, if your arch.make is in /whichever/directory just replace /home/akbar by /whichever/directory , and so on. Best of luck. Marcos On Mon, Jul 26, 2010 at 5:56 PM, akbar jahangiri <[email protected]>wrote: > Dear Marcos > > I had the same problem before, it means after doing all stuff before giving > "make" command > I found that there is no "arch,make" file exist in the " Obj" directory. > > I should mention there was an error while untar the Siesta package ( which > I don't remember ), so I have downloaded the package ( I felt that is > because the package uncompleted download ) and after downloading again > there was no such problem. > > So my suggestion to Zahra and Hossein is DOWNLOAD PACKAGE and try again. > > Best regards > Akbar > > 2010/7/26 Marcos Veríssimo Alves <[email protected]> > > Zahra, >> >> Just do the following: >> >> 1) go to the Obj directory, remove everything, and issue >> ../Src/objsetup.sh >> 2) copy the arch.make you wish to the Obj directory >> 3) from this same directory (Obj!!!!!!), issue make >> 4) run siesta and be happy :) >> >> Marcos >> >> >> On Sun, Jul 25, 2010 at 11:19 AM, Hosein Cheraghchi < >> [email protected]> wrote: >> >>> Hello Mrs. Akbarinezhad, >>> It is interesting that I did the same process on centOS 5 with >>> gfortran.make and it worked. However, I have also installation problem with >>> ubuntu. I do not know what is the problem of ubuntu? Is the same processes >>> have different responses from different version of linux? >>> Best >>> hossein >>> >>> --- On *Sun, 7/25/10, zahra akbarinezhad <[email protected]>*wrote: >>> >>> >>> From: zahra akbarinezhad <[email protected]> >>> Subject: [SIESTA-L] compiling problem in siesta-3.0-rc1(siesta >>> 3.0-beta-15) >>> To: [email protected] >>> Date: Sunday, July 25, 2010, 12:36 PM >>> >>> >>> hello >>> I trying to compiling siesta-3.0-rc1(siesta 3.0-beta-15) but i faced by >>> below error.my linux is ubuntu and my fortran is gfortran. >>> I did these stepes: >>> 1/ I coied gfortran.make into Src & Obj with arch.make name. >>> 2/ i run sh ../Src/obj_setup.sh >>> 3/then type make but i faced with this error >>> make: *** No targets. Stop. >>> >>> *anyone can help me?* >>> thanks >>> >>> >>> *********************************************************************************************************** >>> :~/siesta-3.0-rc1$ cd obj >>> :~/siesta-3.0-rc1/obj$ ls >>> arch.make fox makefile mpi Tests xmlparser >>> fdf libs Makefile readme wxml >>> :~/siesta-3.0-rc1/obj$ cd .. >>> :~/siesta-3.0-rc1$ ls >>> docs obj readme siesta_licence Tests util >>> examples pseudo readme_transiesta Src tutorials >>> version.info >>> :~/siesta-3.0-rc1$ cd Src/ >>> :~/siesta-3.0-rc1/Src$ ls >>> aclocal.m4 ibm.f ofc.f >>> alloc.f90 ibm_pessl.f old_atmfuncs.f >>> arch.make idiag.f onmod.f >>> arch.make.in include on_subs.f >>> arw.f initatom.f optical.f >>> atmfuncs.f initparallel.f ordern.f >>> atmparams.f inver.f outcell.f >>> atm_transfer.f iocg.f outcoor.f >>> atm_types.f iodm.f overfsm.f >>> atom.f iodmhs_netcdf.f90 overlap.f >>> atomlist.f iodm_netcdf.f90 parallel.f >>> atomlwf.f ioeig.f parallelsubs.f >>> atom_options.f90 io.f parsing.f >>> automatic_cell.f iofa.f paste.f >>> bands.f iogrid_netcdf.f90 pdos.f >>> basis_enthalpy.f90 iohs.f pdosg.f >>> basis_io.f iokp.f pdosk.f >>> basis_specs.f iolwf.f pdoskp.f >>> basis_types.f iomd.f periodic_table.f >>> bessph.f iopipes.f90 phirphi.f >>> bonds.f iowfs_netcdf.f90 phirphi_opt.f >>> born_charge.f ioxv.f phonon.f >>> broadcast_basis.f iozm.f pixmol.f >>> broyden_optim.f ipack.f plcharge.f >>> bsd.f kgrid.f poison.f >>> cart2frac.f kgridinit.f post_scf_work.f >>> cdiag.f kinefsm.f precision.f >>> cell_broyden_optim.f kpoint_grid.f90 projected_dos.f >>> cell_fire_optim.f kpoint_pdos.f90 propor.f >>> cellxc.f ksv.f proximity_check.f >>> cgvc.f ksvinit.f pseudopotential.f >>> cgvc_zmatrix.f libs pxf.f90 >>> cgwf.f linpack.f radfft.f >>> chemical.f listsc.f radial.f >>> chempot.f local_dos.f ran3.f >>> chkdim.f m4 rdiag.f >>> chkgmx.f madelung.f readsp.f >>> coceri.f Makefile recipes.f >>> compute_dm.f matel.f reclat.f >>> compute_norm.f m_broyddj.f90 redcel.f >>> config.guess m_broyddj_nocomm.f90 reinit.f >>> config.log m_broyden_mixing.f >>> remove_intramol_pressure.f90 >>> config.status m_cell.f reoptical.f >>> config.sub m_check_supercell.f reord.f >>> configure m_convergence.f90 rhooda.f >>> configure.ac m_dipol.f90 rhoofd.f >>> confs md_out.f90 rhoofdsp.f >>> conjgr.f md_utils.f90 savepsi.f >>> conjgr_old.f m_efield.f scalapack_extra.f >>> constr.f memory.f scfconvergence_test.f >>> coor.f memoryinfo.f setatomnodes.f >>> coxmol.f m_energies.f90 setspatial.f >>> cpu_time.f90 m_eo.f90 setup_hamiltonian.f >>> cross.f meshmatrix.f setup_kscell.f >>> denmat.f meshsubs.f sgi.f >>> denmatlomem.f metaforce.f shaper.f >>> densematrix.f m_fdf_global.f90 show_distribution.f >>> detover.f m_filter.f90 siesta_analysis.f >>> dfscf.f m_fire.f90 siesta_cml.f90 >>> dhscf.f m_fire_mixing.f siesta_cmlsubs.f90 >>> diag2g.f m_fire_para.f90 siesta_end.f >>> diag2k.f m_forces.f90 siesta.F >>> diagg.f m_gamma.f90 siesta_forces.f >>> diagk.f m_getopts.f90 siesta_geom.f90 >>> diagk_file.f m_history.f90 siesta_init.f >>> diagkp.f m_hsx.f siesta_move.f >>> diagon.f minvec.f siesta_options.f90 >>> diagpol.f m_iodm.f sorting.f >>> diagsprl.f m_iorho.f sparse_matrices.f90 >>> digcel.f m_iostruct.f spatial.f >>> dipole.f mixer.f spher_harm.f >>> dismin.f m_kinetic.f90 state_analysis.f >>> dnaefs.f m_memory.f state_init.f >>> doping.f m_mpi_utils.f struct_init.f >>> dot.f mneighb.f sys >>> dsyevds.f m_ntm.f90 sys.f >>> dynamics.f molecularmechanics.f90 t3e.f >>> egandd.f m_options.f90 Tests >>> eggbox.f mpi timer.f >>> electrostatic.f m_pulay.f timestamp.f90 >>> ener3.f m_rmaxh.f90 transition_rate.f >>> ener3lomem.f m_sparse.f typecell.f >>> extrapolon.f m_spin.f90 uncell.f >>> f2kcli.f90 m_steps.f90 units.f90 >>> f2kcli_manual.txt m_stress.f90 version.f90 >>> fdf m_ts_aux_rout.f vmat.f >>> fermid.f m_ts_contour.f vmatsp.f >>> fft3d.f m_ts_electrode.f90 vmb.f >>> files.f m_ts_in_siesta.f volcel.f >>> find_kgrid.f m_ts_io.f90 write_md_record.f >>> fire_optim.f m_ts_kpoints.f90 write_raw_efs.f90 >>> fixed.f m_ts_options.f90 write_subs.f >>> flib_spline.f90 m_ts_scattering.f writewave.f >>> forhar.f mulliken.f wxml >>> fox m_wallclock.f90 xc.f >>> fsiesta.f90 m_walltime.f90 xcmod.f >>> general.f naefs.f xlf.f >>> get_target_stress.f nag.f xml.f >>> globalise.f new_dm.f xmlparser >>> gradient.f nlefsm.f zheevds.f90 >>> gradientlomem.f normalize_dm.f zmatrix.f >>> grdsam.f obc.f zm_broyden_optim.f >>> hsparse.f obj_setup.sh zm_fire_optim.f >>> d...@physics:~/siesta-3.0-rc1/Src$ sh ../Src/obj_setup.sh >>> cp: `./Tests/si111-spinpol/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si111-spinpol/makefile' are the same >>> file >>> cp: `./Tests/sinw_2/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/sinw_2/makefile' are the same file >>> cp: `./Tests/zmatrix/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/zmatrix/makefile' are the same file >>> cp: `./Tests/born_spin/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/born_spin/makefile' are the same file >>> cp: `./Tests/h2o_basis/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_basis/makefile' are the same file >>> cp: `./Tests/ch4/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/ch4/makefile' are the same file >>> cp: `./Tests/force_2/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/force_2/makefile' are the same file >>> cp: `./Tests/var_cell/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/var_cell/makefile' are the same file >>> cp: `./Tests/h2o_radialgrid/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_radialgrid/makefile' are the same >>> file >>> cp: `./Tests/si_coop/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si_coop/makefile' are the same file >>> cp: `./Tests/fire_benzene/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/fire_benzene/makefile' are the same >>> file >>> cp: `./Tests/h2o_coop/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_coop/makefile' are the same file >>> cp: `./Tests/mgco3/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/mgco3/makefile' are the same file >>> cp: `./Tests/nanotube-c-5-0/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/nanotube-c-5-0/makefile' are the same >>> file >>> cp: `./Tests/md_anneal/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/md_anneal/makefile' are the same file >>> cp: `./Tests/fe_cohp/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/fe_cohp/makefile' are the same file >>> cp: `./Tests/h2o_findp_bug/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_findp_bug/makefile' are the same >>> file >>> cp: `./Tests/ptcda/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/ptcda/makefile' are the same file >>> cp: `./Tests/sih/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/sih/makefile' are the same file >>> cp: `./Tests/floating/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/floating/makefile' are the same file >>> cp: `./Tests/sic-slab/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/sic-slab/makefile' are the same file >>> cp: `./Tests/ptcda-au/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/ptcda-au/makefile' are the same file >>> cp: `./Tests/benzene/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/benzene/makefile' are the same file >>> cp: `./Tests/constant_volume/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/constant_volume/makefile' are the >>> same file >>> cp: `./Tests/si001/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si001/makefile' are the same file >>> cp: `./Tests/batio3/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/batio3/makefile' are the same file >>> cp: `./Tests/h_chain/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h_chain/makefile' are the same file >>> cp: `./Tests/32_h2o/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/32_h2o/makefile' are the same file >>> cp: `./Tests/fe_broyden/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/fe_broyden/makefile' are the same >>> file >>> cp: `./Tests/h2o_ordern/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_ordern/makefile' are the same >>> file >>> cp: `./Tests/fe_noncol_kp/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/fe_noncol_kp/makefile' are the same >>> file >>> cp: `./Tests/oxyn/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/oxyn/makefile' are the same file >>> cp: `./Tests/h3po4_1/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h3po4_1/makefile' are the same file >>> cp: `./Tests/md_npr/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/md_npr/makefile' are the same file >>> cp: `./Tests/fen/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/fen/makefile' are the same file >>> cp: `./Tests/graphite_c6/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/graphite_c6/makefile' are the same >>> file >>> cp: `./Tests/pb_filter_cutoff/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/pb_filter_cutoff/makefile' are the >>> same file >>> cp: `./Tests/h2o_op_broyden/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_op_broyden/makefile' are the same >>> file >>> cp: `./Tests/si64_coop/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si64_coop/makefile' are the same file >>> cp: `./Tests/sinw/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/sinw/makefile' are the same file >>> cp: `./Tests/si2x1h/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si2x1h/makefile' are the same file >>> cp: `./Tests/h3po4_3/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h3po4_3/makefile' are the same file >>> cp: `./Tests/carbon_nanoscroll/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/carbon_nanoscroll/makefile' are the >>> same file >>> cp: `./Tests/graphite_c6_full/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/graphite_c6_full/makefile' are the >>> same file >>> cp: `./Tests/h2oz/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2oz/makefile' are the same file >>> cp: `./Tests/pd_ice/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/pd_ice/makefile' are the same file >>> cp: `./Tests/si_bandpoints/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si_bandpoints/makefile' are the same >>> file >>> cp: `./Tests/partial/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/partial/makefile' are the same file >>> cp: `./Tests/pb_bulk/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/pb_bulk/makefile' are the same file >>> cp: `./Tests/h2o_2/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_2/makefile' are the same file >>> cp: `./Tests/pb_bulk_1000/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/pb_bulk_1000/makefile' are the same >>> file >>> cp: `./Tests/si64/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si64/makefile' are the same file >>> cp: `./Tests/fe/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/fe/makefile' are the same file >>> cp: `./Tests/h2o_dos/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_dos/makefile' are the same file >>> cp: `./Tests/si2x1h-dipole/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si2x1h-dipole/makefile' are the same >>> file >>> cp: `./Tests/md_nose/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/md_nose/makefile' are the same file >>> cp: `./Tests/h2o_netcdf/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_netcdf/makefile' are the same >>> file >>> cp: `./Tests/md_pr/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/md_pr/makefile' are the same file >>> cp: `./Tests/force_constants/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/force_constants/makefile' are the >>> same file >>> cp: `./Tests/h2o_4/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_4/makefile' are the same file >>> cp: `./Tests/ag/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/ag/makefile' are the same file >>> cp: `./Tests/h2o_reparam/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o_reparam/makefile' are the same >>> file >>> cp: `./Tests/fe_clust_noncollinear/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/fe_clust_noncollinear/makefile' are >>> the same file >>> cp: `./Tests/bessel/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/bessel/makefile' are the same file >>> cp: `./Tests/sih_fire/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/sih_fire/makefile' are the same file >>> cp: `./Tests/ge111/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/ge111/makefile' are the same file >>> cp: `./Tests/sih_op_broyden/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/sih_op_broyden/makefile' are the same >>> file >>> cp: `./Tests/md_verlet/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/md_verlet/makefile' are the same file >>> cp: `./Tests/born/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/born/makefile' are the same file >>> cp: `./Tests/n_chain/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/n_chain/makefile' are the same file >>> cp: `./Tests/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/makefile' are the same file >>> cp: `./Tests/h_chain2/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h_chain2/makefile' are the same file >>> cp: `./Tests/h3po4_2/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h3po4_2/makefile' are the same file >>> cp: `./Tests/h2o/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/h2o/makefile' are the same file >>> cp: `./Tests/pb_filter_tol/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/pb_filter_tol/makefile' are the same >>> file >>> cp: `./Tests/si_pdos_kgrid/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./Tests/si_pdos_kgrid/makefile' are the same >>> file >>> cp: `./fox/fsys/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./fox/fsys/makefile' are the same file >>> cp: `./fox/wcml/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./fox/wcml/makefile' are the same file >>> cp: `./fox/common/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./fox/common/makefile' are the same file >>> cp: `./fox/wxml/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./fox/wxml/makefile' are the same file >>> cp: `./fox/utils/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./fox/utils/makefile' are the same file >>> cp: `./fox/makefile' and `/home/dubs/siesta-3.0-rc1/Src/./fox/makefile' >>> are the same file >>> cp: `./xmlparser/makefile' and >>> `/home/dubs/siesta-3.0-rc1/Src/./xmlparser/makefile' are the same file >>> cp: `./libs/makefile' and `/home/dubs/siesta-3.0-rc1/Src/./libs/makefile' >>> are the same file >>> cp: `./fdf/makefile' and `/home/dubs/siesta-3.0-rc1/Src/./fdf/makefile' >>> are the same file >>> cp: `./wxml/makefile' and `/home/dubs/siesta-3.0-rc1/Src/./wxml/makefile' >>> are the same file >>> cp: `./mpi/makefile' and `/home/dubs/siesta-3.0-rc1/Src/./mpi/makefile' >>> are the same file >>> cp: `./fdf/fdf.h' and `/home/dubs/siesta-3.0-rc1/Src/./fdf/fdf.h' are the >>> same file >>> cp: `./fdf/fdfdefs.h' and `/home/dubs/siesta-3.0-rc1/Src/./fdf/fdfdefs.h' >>> are the same file >>> cp: `./fdf/fdf.h' and `/home/dubs/siesta-3.0-rc1/Src/./fdf/fdf.h' are the >>> same file >>> cp: `./fdf/fdfdefs.h' and `/home/dubs/siesta-3.0-rc1/Src/./fdf/fdfdefs.h' >>> are the same file >>> *** Compilation setup done. >>> *** Remember to copy an arch.make file or run configure as: >>> ../Src/configure [configure_options] >>> d...@physics:~/siesta-3.0-rc1/Src$ make >>> make: *** No targets. Stop. >>> @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ >>> d...@physics:~/siesta-3.0-rc1/Src$ ./configure >>> checking build system type... i686-pc-linux-gnu >>> checking host system type... i686-pc-linux-gnu >>> checking for xlf95... no >>> checking for lf95... no >>> checking for f95... f95 >>> checking for Fortran compiler default output file name... a.out >>> checking whether the Fortran compiler works... yes >>> checking whether we are cross compiling... no >>> checking for suffix of executables... >>> checking for suffix of object files... o >>> checking whether we are using the GNU Fortran compiler... yes >>> checking whether f95 accepts -g... yes >>> checking for Fortran flag needed to allow fixed-form source for .f >>> suffix... none >>> checking for Fortran flag needed to allow free-form source for .f90 >>> suffix... none >>> checking for gcc... gcc >>> checking whether we are using the GNU C compiler... yes >>> checking whether gcc accepts -g... yes >>> checking for gcc option to accept ANSI C... none needed >>> checking for fixed form Fortran preprocessor features... done. >>> checking whether f95 compiles programs with cpp directives... yes >>> checking whether f95 accepts -D... yes >>> checking whether f95 accepts -I... yes >>> checking whether f95 fulfils requested features... yes >>> checking preprocessing mode we may therefore use... direct >>> checking for Fortran flag needed to allow preprocessed fixed-form source >>> for .F suffix... (cached) none >>> checking for Fortran flag needed to allow free-form source for .F90 >>> suffix... none >>> checking for ranlib... ranlib >>> configure: Could not determine type of compiler >>> checking for kind number produced by kind(1.0)... checking for kind >>> number produced by kind(1.0)... 4 >>> checking for kind number produced by kind(1.0d0)... checking for kind >>> number produced by kind(1.0d0)... 8 >>> checking for kind number produced by selected_real_kind(6,34)... checking >>> for kind number produced by selected_real_kind(6,34)... 4 >>> checking for kind number produced by selected_real_kind(15,300)... >>> checking for kind number produced by selected_real_kind(15,300)... 8 >>> checking how to compile a call to FLUSH... default >>> checking how to compile a call to ABORT... default >>> checking how to compile DIMAG... default >>> checking for netcdf... no >>> checking is BLAS linked by default... no >>> checking for BLAS in -lblasmt... no >>> checking for BLAS in ATLAS... no >>> checking for sgemm in -lblas... no >>> checking for sgemm in -lcxml... no >>> checking for sgemm in -ldxml... no >>> checking for sgemm in -lscs... no >>> checking for sgemm in -lcomplib.sgimath... no >>> checking for sgemm in -lblas... (cached) no >>> checking for sgemm in -lblas... (cached) no >>> configure: Using BLAS packaged with SIESTA >>> checking LAPACK already linked... no >>> checking for LAPACK in -llapackmt... no >>> checking for LAPACK in -llapack... no >>> checking for LAPACK in -llapack_rs6k... no >>> configure: Using LAPACK packaged with SIESTA >>> configure: creating ./config.status >>> config.status: creating arch.make >>> d...@physics:~/siesta-3.0-rc1/Src$ >>> d...@physics:~/siesta-3.0-rc1/Src$ make >>> make: *** No targets. Stop. >>> >>> >>> >>> >> >
